• 제목/요약/키워드: 8-and 16-frame

검색결과 161건 처리시간 0.024초

음성인식 시스템에서의 음소분할기의 성능 (Performance of the Phoneme Segmenter in Speech Recognition System)

  • 이광석
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 추계학술대회
    • /
    • pp.705-708
    • /
    • 2009
  • 본 연구는 자연음성의 인식을 위하여 신경회로망을 기초로 한 음소 분할기에 대하여 기술하였다. 자연음성의 인식을 위한 음소 분할기의 입력으로는 16차 멜 스케일의 FFT, 정규화된 프레임 에너지, 0~3[KHz] 주파수 대역 및 그 이상의 대역에서의 에너지 비를 사용하였다. 모든 특징들은 두개의 연속적인 10[msec] 프레임의 차이며, 본 연구에 사용한 음소분할기는 하나의 72입력을 가지는 은닉층 퍼셉트론, 20은닉노드 및 하나의 출력노드로 구성하여 사용하였다. 자연음성에 대한 음소분할의 정확도는 7.8%삽입을 가지는 78%를 얻을 수 있었다.

  • PDF

연어 frame 통조림의 제조 및 특성 (Preparation and Characterization of Canned Salmon Frame)

  • 박권현;윤민석;김정균;김형준;신준호;이지선;노윤이;허민수;김진수
    • 한국수산과학회지
    • /
    • 제43권2호
    • /
    • pp.93-99
    • /
    • 2010
  • This study was conducted to prepare canned salmon frame and to characterize its food components. In the preparation of high-quality canned foods, the boiling water generated in the pre-heating process should be removed, and then the pre-treated canned salmon frame should be sterilized for an $F_0$ value of 12 min. The proximate composition of the canned salmon frame prepared under optimal conditions (CSFP) was 58.4% moisture, 15.7% protein, 21.4% lipid, and 3.5% ash. Based on the results of volatile basic nitrogen and microbiological tests, the CSFP was acceptable. The sensory score for the color of CSFP was 4.1 points, which was higher than that of commercial canned salmon frame (CCSF). However, there were no significant differences in the sensory scores for flavor and taste between CSFP and CCSF. The total amino acid content of CSFP was 14.58 g/100 g, which was 4.9% lower than that of CCSF. The major amino acids in CSFP were aspartic acid (11.0%), glutamic acid (14.8%), and lysine (10.6%), which accounted for 36.4% of the total amino acid content. The CSFP was high in calcium and phosphorus, while it was low in magnesium and zinc. The major fatty acids in CSFP were 16:0 (15.2%), 18:1n-9 (17.0%), 18:2n-6 (16.7%), 20:5n-3 (9.3%), and 22:6n-3 (8.8%). Based on the results, CSFP is a high-quality canned food in terms of hygiene and nutrition.

고속 분산 비디오 복호화 기법에서 패리티 비트 예측방식에 대한 LDPCA 프레임 크기 효과 (Effects of LDPCA Frame Size for Parity Bit Estimation Methods in Fast Distributed Video Decoding Scheme)

  • 김만재;김진수
    • 한국정보통신학회논문지
    • /
    • 제16권8호
    • /
    • pp.1675-1685
    • /
    • 2012
  • 분산 비디오 부호화 기법(DVC)은 매우 낮은 복잡도를 갖는 비디오 부호화기를 제공하는데 중요한 역할을 담당하고 있다. 그러나 우수한 비트율-왜곡 성능을 얻기 위해 기존의 대부분의 DVC 기법은 피드백 채널을 통해 패리티 비트 제어를 수행하고 있으며, 이것은 비디오 복호화에 있어 많은 시간을 초래하여 실시간 구현을 위해 꼭 극복해야 할 문제점으로 남아 있다. 이러한 문제점을 해결하고 상업화를 촉진하기 위해, 본 논문에서는 LDPCA 프레임 크기가 복호화 지연 및 전체적인 부호화 성능에 미치는 영향을 분석한다. 먼저 화소 영역 위너-지브 부호화 기법에서 각 비디오 프레임을 일정한 크기의 LDPCA 프레임으로 분할하고, 분할된 LDPCA 프레임별로 시간적 상관성을 이용한 예측 방식과 공간적 상관성을 갖는 예측 방식에 따른 성능을 비교 분석한다. 모의실험을 통하여, 현재 가장 많이 연구되고 있는 QCIF크기의 영상에 대해서는 LDPCA 프레임 크기가 3168크기일 때, 가장 우수한 부호화 성능 및 고속화에 유리함을 보인다.

이전 매크로블록의 양자화계수 누적값을 이용한 매크로블록 마다 가변적인 양자화계수 탐색방법 (A Variable Quantization Coefficient Scanning for Macroblock Considering the Histogram Value of Previous Macroblock's Quantization Coefficient)

  • 현명한
    • 한국군사과학기술학회지
    • /
    • 제14권2호
    • /
    • pp.281-288
    • /
    • 2011
  • In this paper, a variable quantization coefficient scanning for macroblock considering the histogram value of previous macroblock's quantization coefficient is proposed. In order to scan a quantization coefficient, the proposed method makes $4{\times}4$ histograms for various prediction modes($16{\times}16$, $16{\times}8$, $8{\times}16$, $8{\times}8$) by adding 1 if the value of quantization coefficient is not 0. After a final mode decision procedure, the $4{\times}4$ histogram of the final mode will be sorted. Then, quantization coefficients in corresponding macroblock of the next frame are scanned using the sorted order. The experimental results show that the proposed scheme reduces the total bits by approximately 0.01~2.25% with similar PSNR performance compared with the previous method.

POCS와 정규화를 기반으로한 프레임간 압출 영사의 후처리 (Postprocessing of Inter-Frame Coded Images Based on Convex Projection and Regularization)

  • 김성진;정시창;황인경;백준기
    • 대한전자공학회논문지SP
    • /
    • 제39권3호
    • /
    • pp.58-65
    • /
    • 2002
  • 본 논문에서는 프레임간 압축된 영상의 블록화 현상을 감소시키기 위해 재구성하기 전 차분 영상을 처리하는 새로운 복원 알고리듬을 제안한다. 프레임내 압축 영상의 블록화 현상은 오직 8×8 DCT에 의해서 일어나는 반면에, 프레임간 압축된 영상에서는 8×8 DCT뿐만 아니라 움직임 보상을 위해 사용한 16×16의 매크로 블록에 의해서 발생된다. 이러한 이유로 본 논문에서는 차분 영상에 대한 새로운 열화모델을 제시하고, 블록 경계와 내부의 불연속에 대한 POCS를 이용한 복원 알고리듬을 제시한다. 제안된 알고리듬은 DCT계수의 일부를 이용해 블록 경계의 방향을 고려하는 공간 적응적 저대역 통과 필터를 포함하는 표준 정규화의 변환된 형태이다. 일반적인 비디오 압축 표준은 블록을 기준으로 하는 움직임 보상과 블록 이산여현 변환(BDCT)을 이용한 혼성(hybrid) 구조를 채택하고 있다. 이러한 이유에서 블록화 현상은 블록 경계와 블록 내부에서 일어난다. 두 종류의 블록화 현상을 좀 더 완벽히 제거하기 위해서 복원된 차분 영상은 블록 경계와 블록 내부에서의 방향성 불연속과 같은 제약조건을 만족시켜야만 한다. 그러한 제약조건은 차분 영상을 복구하기 위한 convex set을 정의하는데 이용한다.

8-단위영상과 16-단위영상으로 얻은 게이트 심근관류 스펙트에서 국소 심근관류, 좌심실 용적과 구혈률의 비교 (Comparison of Regional Myocardial Perfusion, Left Ventricular Volume and Ejection Fraction between 8- and 16-Frame Gated SPECT)

  • 이상우;이재태;배진호;정신영;천경아;하정희;안병철;이규보
    • 대한핵의학회지
    • /
    • 제37권5호
    • /
    • pp.269-277
    • /
    • 2003
  • 목적: 게이트 심근관류 스펙트는 심근의 관류와 좌심실 기능을 동시에 평가할 수 있는 유용한 방법이다. 현재, 게이트 영상 획득시 8 단위영상이 널리 사용되지만, 아직 가장 적절한 단위영상의 수에 대해서는 논의의 여지가 있다. 본 연구는 동일한 환자에서 8 단위영상과 16 단위영상으로 게이트 심근관류 스펙트를 2회 연속적으로 시행하여 국소적 심근관류, 좌심실 용적과 구혈률등을 비교하였다. 대상 및 방법: 42명(평균 연령: 55세, 남: 녀=26: 16)의 관상동맥 질환이 의심되거나 알려진 환자를 대상으로 안정시 Tc-99m MIBI를 이용한 게이트 스펙트를 8 단위영상과 16 단위영상으로 2회 연속하여 시행하였다. 좌심실의 확장기말 용적, 수축기말 용적과 구혈률을 각각 얻었으며 확장기말의 단층영상을 18 분절로 나누고 각 분절마다 심근의 관류정도를 4등급으로 나누어 국소적 심근관류를 평가하였다. 결과: 8 단위영상과 16 단위영상 게이트 스펙트에서 국소적 심근관류의 일치도는 85.7% (tau-b=0.786, p<0.001)로 우수하였다. 두 방법간에 1등급의 차이는 100 분절(13.2%), 2등급 차이는 8 분절(1.1 %)이 있었고 3등급 차이는 없었다. 좌심실의 확장기말 용적, 수축기말 용적, 구혈률은 두 방법간에 높은 상관성을 보였으며(r=0.993, 0.989, 0.935), 좌심실 구혈률은 8 단위영상을 사용할 때 평균 1.8% 낮게 측정되어 통계적인 유의성은 있었으나(p<0.05), 그 차이는 크지 않았다. 결론: 8 단위영상과 16 단위영상을 사용한 게이트 심근관류 스펙트에서 국소적 심근관류의 일치도는 우수하였으며, 좌심실의 기능적 계수의 차이도 크지 않았다. 비록 높은 단위영상을 사용했을 때 더 정확하고 자세한 정보를 얻을 수 있다 하더라도, 구혈률과 용적 등을 얻는 일상적인 임상검사에는 8 단위영상 또한 그 역할을 충분히 할 수 있을 것으로 사료된다.

Fish-frame을 이용한 snack의 제조 및 특성 (Preparation and Characteristics of Fish-frame-added Snacks)

  • 강경태;허민수;김진수
    • 한국수산과학회지
    • /
    • 제39권3호
    • /
    • pp.261-268
    • /
    • 2006
  • Fish-frames are processing byproducts, which are left after obtaining fillets or muscle during fish processing. The fish-frame generally consists of muscle, collagen, calcium, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). We used fish-frame powder (FFP) of chum salmon and skipjack tuna to prepare and characterize snacks for human consumption with different proportions of FFP. The crude protein and lipid contents of fish-frames were 16.3 and 9.4% for chum salmon and 18.6 and 8.3% for skipjack tuna, respectively. The volatile basic nitrogen (30.6 mg/100 g) and browning index (0.393) of FFP from chum salmon were lower than those of FFP from skipjack tuna. Thus, the FFP of chum salmon was better for making snacks than that of skipjack tuna. Five snacks were prepared with 0, 10, 20, 30, and 40% (w/w) substitution ratios of FFP from chum salmon. The moisture content of the snacks decreased (33.6 to 11.5%) with increasing FFP substitution ratio, whereas crude ash (2.9 to 7.5%), protein (11.4 to 18.4%) and lipid (13.7 to 35.1%) increased. Sensory scores for the texture and taste of the snack with 30% FFP were significantly higher (p<0.05) than those for other snacks; the color and flavor scores of all snacks did not differ significantly. The major fatty acids in the snacks were 16:0 and 18:0 as saturates, 18:1n-9 as monoenes, and 18:2n-6 and 18:3n-3 as polyenes. Snacks with FFP contained small amounts of EPA (0.5 to 0.8%) and DHA (1.3 to 1.8%) in the total lipid composition. The total amino acid content (16.08 g/100 g) of the snack with 30% FFP was higher than that of the snack without FFP (11.18 g/100 g), and the major amino acids were aspartic acid, glutamic acid, glycine, leucine, and lysine. The calcium and phosphorus contents of the snack with 30% FFP were 1,272 mg/100 g and 854 mg/100 g, respectively, and their ratio was the optimal range (2:1 to 1:2) for body absorption efficiency.

H.264 부호화기를 위한 Intra-prediction & DCTQ Hardware 구조 (The Architecture of Intra-prediction & DCTQ Hardware for H.264 Encoder)

  • 서기범
    • 대한전자공학회논문지SD
    • /
    • 제47권5호
    • /
    • pp.1-9
    • /
    • 2010
  • 이 논문에서는, 풀 HD 영상을 실시간에 처리가능한 새로운 화면 내 예측 및 DCTQ 하드웨어구조를 제안한다. 화면내 예측,.$4{\times}4$ 을 처리하기 위한 예측과 변환, 양자화, 역양자화, 역변환및 복원의 전체 cycle 을 줄일 수 있는 방법을 제안한다. $4{\times}4$ 예측 부호화 cycle을 줄이기 위해, 양자화과정을 예측 사이클에서 적용할 수 있도록 하였으며, 회로의 크기를 줄이기 위하여 9가지 모드 중 2개의 모드를 먼저 선택하는 알고리듬을 사용하였다. 또한 $16{\times}16$ 예측과 $8{\times}8$ 예측 과정를 하나의 코어를 이용하여 설계하므로 크기를 줄였다. 제안된 구조는 108Mhz 클럭에서 full HD영상을 30frame/sec에서 동작하며, 한 매크로블록의 처리 cycle 은 425 cycle이다.

곱셈기를 재사용하는 16×16 HEVC 코어 역변환기 설계 (16×16 HEVC Inverse Core Transform Architecture Using Multiplier Reuse)

  • 이종배;이성수
    • 전기전자학회논문지
    • /
    • 제19권3호
    • /
    • pp.378-384
    • /
    • 2015
  • 기존의 HEVC 코어 역변환기에서는 동일한 시간에 동일한 수의 화소를 처리하기 위해서 $2n{\times}2n$ 역변환기에 여분의 $n{\times}n$ 역변환기를 추가하여 한 개의 $2n{\times}2n$ 역변환기 또는 두 개의 $n{\times}n$ 역변환기로 동작하게 하였으나 여분의 $n{\times}n$ 역변환기 때문에 하드웨어 크기가 증가하는 단점이 있다. 이러한 문제점을 해결하기 위해 곱셈기를 재사용하여 여분의 $4{\times}4$ 역변환기를 없앤 새로운 $8{\times}8$ HEVC 코어 역변환기 구조가 제안되었으며, 본 논문에서는 이를 확장한 $16{\times}16$ HEVC 코어 역변환기 구조를 제안한다. 제안하는 $16{\times}16$ HEVC 역변환기는 $4{\times}4$ 역변환, $8{\times}8$ 코어 역 변환, $16{\times}16$ 코어 역변환에서 프레임 처리 시간이 모두 동일하며, 여분의 역변환기를 사용하는 아키텍쳐에 비해 게이트 수를 13% 줄일 수 있다.

Cumulative damage in RC frame buildings - The 2017 Mexico earthquake case

  • Leonardo M. Massone;Diego Aceituno;Julian Carrillo
    • Advances in Computational Design
    • /
    • 제8권1호
    • /
    • pp.13-36
    • /
    • 2023
  • The Puebla-Morelos Earthquake (Mw 7.1) occurred in Mexico in 2017 causing 44 buildings to collapse in Mexico City. This work evaluates the non-linear response of a 6-story reinforced concrete (RC) frame prototype model with masonry infill walls on upper floors. The prototype model was designed using provisions prescribed before 1985 and was subjected to seismic excitations recorded during the earthquakes of 1985 and 2017 in different places in Mexico City. The building response was assessed through a damage index (DI) that considers low-cycle fatigue of the steel reinforcement in columns of the first floor, where the steel was modeled including buckling as was observed in cases after the 2017 earthquake. Isocurves were generated with 72 seismic records in Mexico City representing the level of iso-demand on the structure. These isocurves were compared with the location of 16 collapsed (first-floor column failure) building cases consistent with the prototype model. The isocurves for a value greater than 1 demarcate the location where fatigue failure was expected, which is consistent with the location of 2 of the 16 cases studied. However, a slight increase in axial load (5%) or decrease in column cross-section (5%) had a significant detrimental effect on the cumulated damage, increasing the intensity of the isocurves and achieving congruence with 9 of the 16 cases, and having the other 7 cases less than 2 km away. Including column special detailing (tight stirrup spacing and confined concrete) was the variable with the greatest impact to control the cumulated damage, which was consistent with the absence of severe damage in buildings built in the 70s and 80s.