• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.547-556
• /
• 2019

Thinned, small larch logs have small diameters and no value-added final use, except as wood chips, pallets, or fuel wood, which are products with very low economic value; however, their mechanical strength is suitable for structural applications. In this study, small larch logs were sawed, dried, and cut into square timbers (with a $90mm{\times}90mm$ cross section) that were laterally glued to form core panels used to manufacture cross-laminated timber (CLT) wall panels. The surface and back of these core panels were covered with 12-mm-thick structural plywood panels, used as cross bands to obtain three-ply CLT wall panels. This attachment procedure was conducted in two different ways: gluing and pressing (CGCLT) or gluing and nailing (NGCLT). The size of the as-manufactured CLT panels was $1,220mm{\times}2,440mm$, the same as that of the plywood panels. The final wall panels were tested under lateral shear force in accordance with KS F 2154. As the lateral load resistance test required $2,440mm{\times}2,440mm$ specimens, two CLT wall panels had to be attached in parallel. In addition, the final CLT panels had tongued and grooved edges to allow parallel joints between adjacent pieces. For comparison, conventional light-frame timber shear walls and midply wall systems were also tested under the same conditions. Shear walls with edge nail spacing of 150 mm and 100 mm, the midply wall system, and the fabricated CGCLT and NGCLT wall panels exhibited maximum lateral resistances of 6.1 kN/m (100%), 9.7 kN/m (158%), 16.9 kN/m (274%), 29.6 kN/m (482%), and 35.8 kN/m (582%), respectively.

• Journal of Trauma and Injury
• /
• v.34 no.3
• /
• pp.155-161
• /
• 2021

Purpose: The coronavirus disease 2019 (COVID-19) pandemic has necessitated a redistribution of resources to meet hospitals' service needs. This study investigated the impact of COVID-19 on a regional trauma center in South Korea. Methods: We retrospectively reviewed cases of polytrauma at a single regional trauma center in South Korea between January 20 and September 30, 2020 (the COVID-19 period) and compared them to cases reported during the same time frame (January 20 to September 30) between 2016 and 2019 (the pre-COVID-19 period). The primary outcome was in-hospital mortality, and secondary outcomes included the number of daily admissions, hospital length of stay (LOS), and intensive care unit (ICU) LOS. Results: The mean number of daily admissions decreased by 15% during the COVID-19 period (4.0±2.0 vs. 4.7±2.2, p=0.010). There was no difference in mechanisms of injury between the two periods. For patients admitted during the COVID-19 period, the hospital LOS was significantly shorter (10 days [interquartile range (IQR) 4-19 days] vs. 16 days [IQR 8-28 days], p<0.001); however, no significant differences in ICU LOS and mortality were found. Conclusions: The observations at Regional Trauma Center, Pusan National University Hospital corroborate anecdotal reports that there has been a decline in the number of patients admitted to hospitals during the COVID-19 period. In addition, patients admitted during the COVID-19 pandemic had a significantly shorter hospital LOS than those admitted before the COVID-19 pandemic. These preliminary data warrant validation in larger, multi-center studies.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.113-120
• /
• 2009

Embryonic lethal abnormal visual (elav) is a lethal gene in Drosophila inducing the abnormal development and function of nervous system. We cloned a Bm-elav gene by bioinformatics and biological experiment, based on sequence of ELAV protein and dbEST of Bombyx mori. The full-length of Bm-elav cDNA is 1498 bp, contains a 906 bp open read frame (ORF) encoding a precursor of 301 amino acid residues with a calculated molecular weight of 34 kDa and pI of 8.99. Bm-ELAV protein precursor contains three RNA recognition motifs (RRM) in $24{\sim}91$, $110{\sim}177$ and $222{\sim}295$ bit amino acid residues respectively, and belongs to RNA-binding protein family. Bm-ELAV shared varying positives, ranging from 56% to 60% (Identities from 41% to 45%), with RRM from other species of Xenopus tropicalis, Apis mellifera, Tribolium castaneum, Branchiostoma belcheri and Drosophila. Gene localization indicated that Bm-elav is a single-copy gene, gene mapping within 12-chromosome from 7916.68 knt to 7918.16 knt region of nscaf2993. Spatiotemporal expressions pattern analysis revealed that Bm-elav expressed higher in most tested tissues and developmental stages in whole generation, such as silk gland, fat body, midgut, hemopoietic organ and ovary, but almost no expression in terminated diapause eggs. This suggested that the expression of Bm-elav in early developmental embryonic stages might induce abnormal development like in Drosophila. Cloning of the Bm-elav gene enables us to test its potential role in controlling pests by transferring the gene into field lepidopteran insects in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.156-161
• /
• 2007

In a TDD system, the length of slots can be unequal, and the number of downlink (DL) and uplink (UL) slots per frame can be different as well. The advantage of using TDD is the capability to accommodate asymmetric high-bit-rate services for the DL and It, which will be one of the prominent features in 4G systems. This paper analyzes the performance of TDD system on mobile channel environments like indoor pedestrian and vehicular channel, and proposes optimum modulation/demodulation method in TDD system. A rectangular QAM (RQAM) used in various communication systems has good BER performance but the much more signal amplitudes also have become one of the barriers to implement receiver. While PSK receiver is implemented easily because it has a constant amplitude, but it's BER performance is worse than RQAM. APSK proposed in this paper integrates merits of RQAM and PSK, and minimizes demerits of then And a simple method is also proposed to demodulate the soft symbol. The results indicate that the proposed APSK has a little worse performance than RQAM but the dynamic range of APSK is about 4 dB, 8 dB better than RQAM at 16-ary, 64-ary modulation/demodulation respectively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.3
• /
• pp.16-33
• /
• 1993

New decoding algorithm of double-error-correction Reed-Solmon codes over GF(2$^{8}$) for optical compact disks is proposed and decoding algorithm of RS codes with triple-error-correcting capability is presented in this paper. First of all. efficient algorithms for estimating the number of errors in the received code words are presented. The most complex circuits in the RS decoder are parts for soving the error-location numbers from error-location polynomial, so the complexity of those circuits has a great influence on overall decoder complexity. One of the most known algorithm for searching the error-location number is Chien's method, in which all the elements of GF(2$^{m}$) are substituted into the error-location polynomial and the error-location number can be found as the elements satisfying the error-location polynomial. But Chien's scheme needs another 1 frame delay in the decoder, which reduces decoding speed as well as require more stroage circuits for the received ocode symbols. The ther is Polkinghorn method, in which the roots can be resolved directly by solving the error-location polynomial. Bur this method needs additional ROM (readonly memory) for storing tthe roots of the all possible coefficients of error-location polynomial or much more complex cicuit. Simple, efficient, and high speed method for solving the error-location number and decoding algorithm of double-error correction RS codes which reudce considerably the complexity of decoder are proposed by using Hilbert theorems in this paper. And the performance of the proposed decoding algorithm is compared with that of conventional decoding algorithms. As a result of comparison, the proposed decoding algorithm is superior to the conventional decoding algorithm with respect to decoding delay and decoder complexity. And decoding algorithm of RS codes with triple-error-correcting capability is presented, which is suitable for error-correction in digital audio tape, also.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.6
• /
• pp.984-991
• /
• 1997

New tumor suppressor gene, snm23, homologous to human nm23/NDP kinase (human nucleoside diphosphate kinase) gene whose product has a tumor metastasis inhibitory activity, was first cloned from Korean tiger shark (Scyliorhinus forazame) skin cDNA library constructed by using a $\lambda$ ZAP-II cDNA synthesis kit. About $1\times10^5$ plaques were screened and several positive plaques were isolated and confirmed by second screening. The phagemid containing a positive clone from the Uni-Zap XR vector was excised in vivo and the gene containing the tumor metastasis suppressor protein was named as snm23. Cloned gene, snm23, was sequenced with ABI-PRISM 310 Genetic Analyzer. The nucleotide and deduced amino acid sequences of snm23 have shown an open reading frame consisting of 450 base pairs that correspond to a protein of 150 amino acid residues, with a calculated molecular mass of 16.8 kDa. Sequence comparison of snm23 with human nm23/NDP kinase was performed by using Blast protein data base of National Center for Biotechnology Information. In order to determine tissue specificity, reverse transcription-polymerase chain reaction (RT-PCR) was used. Good expression level of snm23/NDP kinase was detected at the tissues from skin, cartilage, and liver of Korean tiger shark.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.6 no.1
• /
• pp.16-24
• /
• 2008

Purpose: There has been no nationwide surveillance survey of poisoning cases in Korea. This study examined the clinical characteristics of poisoning admissions in order to obtain preliminary data for future planning. Methods: This study retrospectively reviewed the data on poisoning admissions of 150 hospitals based on the hospital discharge injury surveillance data of Center for Disease Control and Prevention in Korea from January to December in 2004. The demographic data, poisons used, causes of poisoning, reasons for attempted suicide and mortality rate was investigated according to the age group. The factors associated with mortality were also evaluated. Results: A total 836 patients admitted for poisoning were analyzed. Their mean age was $46.5{\pm}19.5$ years (male 415, female 421). The most frequent age group was the 4th and 5th decades. The most common poisons involved were pesticides (45%) and medications (23%). The majority (64%) involved intentional poisoning except for those in the 1st decade. The most common reason for the attempted suicide was family problems. However, individual disease was the most common reason in those over 60 years. The overall mortality rate was 8.7% (73/836). Pesticides and being elderly (over 65 years old) were strongly correlated with fatality. Conclusion: The incidence of intentional poisoning increases from the 2nd decade making it a preventable injury. "Overall, the incidence of intentional poisoning increases from the 2nd decade". Therefore, there is a need to frame a prevention policy corresponding to each factor related to fatality, such as an elderly population and pesticides.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1576-1584
• /
• 2016

Acetyl xylan esterase (AXE), which hydrolyzes the ester linkages of the naturally acetylated xylan and thus known to have an important role for hemicellulose degradation, was isolated from the anaerobic rumen fungus Neocallimastix frontatlis PMA02, heterologously expressed in Escherichi coli (E.coli) and characterized. The full-length cDNA encoding NfAXE1 was 1,494 bp, of which 978 bp constituted an open reading frame. The estimated molecular weight of NfAXE1 was 36.5 kDa with 326 amino acid residues, and the calculated isoelectric point was 4.54. The secondary protein structure was predicted to consist of nine ${\alpha}$-helixes and 12 ${\beta}$-strands. The enzyme expressed in E.coli had the highest activity at $40^{\circ}C$ and pH 8. The purified recombinant NfAXE1 had a specific activity of 100.1 U/mg when p-nitrophenyl acetate (p-NA) was used as a substrate at $40^{\circ}C$, optimum temperature. The amount of liberated acetic acids were the highest and the lowest when p-NA and acetylated birchwood xylan were used as substrates, respectively. The amount of xylose released from acetylated birchwod xylan was increased by 1.4 fold when NfAXE1 was mixed with xylanase in a reaction cocktail, implying a synergistic effect of NfAXE1 with xylanase on hemicellulose degradation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.91-99
• /
• 2022

By applying METHOD 514.8 of the US military standard MIL-STD-810H, vibration analysis of the winding core automatic feeding device was performed during vehicle transportation. The contact point between the LM guide and main support frame was weak in the vertical axis, transverse axis, and longitudinal axis during the transportation of the automatic winding core feeder vehicle, and the maximum equivalent stress was 236.31 MPa in the longitudinal axis. When random vibration was applied, the safety margin in the longitudinal direction was 0.26, indicating low safety. The safety margin was changed by increasing the damage factor to 0.1. Finally, the safety margin was improved to 3.48 to secure safety. Resonance occurred with a Q factor of 9.34 in the harmonic response to which the RMS value of the ASD data was input, and the vertical axis safety margin was derived as 0.16. When the damping factor was 0.15, the Q factor was 3.37, and resonance was avoided with a safety margin of 6.62.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.2 s.69
• /
• pp.235-245
• /
• 2004

The advantages of composite construction are now well understood in terms of structural economy, good performance in service, and ease of construction. However, these conventional composite construction systems have some problems in application to steel framed buildings due to their large depth. So, in this study we executed an experimental test with the "Slim Floor"system which could reduce the overall depth of composite beam. Slim Floor system is a method of steel frame multi-story building construction in which the structural depth of each floor is minimized by incorporating the steel floor beams within the depth of the concrete floor slab. Presented herein is an experimental study that focuses on the flexural behaviour of the partially connected slim floor system with asymmetric steel beams encased in composite concrete slabs. Eight full-scale specimens were constructed and tested in this study with different steel beam height, slab width, with or without shear connection and concrete topping thickness. Observations from experiments indicated that the degree of shear connection without additional shear connection was $0.53{\sim}0.95$ times that of the full shear connection due to inherent mechnical and chemical bond stress.