• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1450-1456
• /
• 2015

The received signal strengths according to the propagation distance between a transmitting shore station with a 53 m antenna hight and a receiving ship station with about 6m antenna hight from 700 m upto about 20 km are measured at ship's moving velocity of $5{\pm}1m/s$ using a single carrier signal at 150.0625MHz. In this paper, the path loss exponents at the propagation distance from 700 m to 20km are estimated via minimum-mean-square-error method using the measurements of the received signal strength, and the mean of the estimated path loss exponent become 3.79. The estimated propagation path loss exponents is similar to that calculated based on the field-strength values from 2 km to 20 km in Annex 2 of ITU-R P.1546-4, which is measuring results at maritime VHF at 100 MHz carrier frequency. Therefore, the estimated propagation path loss exponent shall be used as the expected path loss exponents for summer in costal area of South Sea of Korea.

• Broadcasting and Media Magazine
• /
• v.17 no.2
• /
• pp.18-25
• /
• 2012

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.66-71
• /
• 2014

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.10a
• /
• pp.696-700
• /
• 1996

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.21-26
• /
• 2010

This paper describes patch antenna design method of antenna high gain and broad bandwidth using cylindrical magneto material around feeding line. Strong current induction method applied combination to generate magnetic fields around feeding line for antenna high gain characteristic and principle of PIFA designed application for design of antenna broadband. In case of single CMM, gain increased 3.96 dB compare with the reference antenna gain however bandwidth characteristic not increased compare with the reference antenna. In case of dual CMM, gain improved about 10 dB compare with the reference antenna and -10 below bandwidth is 700 MHz(50 MHz~750 MHz) with this paper designed high gain characteristic.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1470-1481
• /
• 2008

A demand for spectrum resources, especially in the low frequency bands, is ever increasing with the development of mobile telecommunications and so is their economic value as other national resources. Also, development in mobile broadband require more bandwidth with excellent propagation characteristics, such as those frequencies in the 700/800/900 MHz bands. As a way to enhance the economic efficiency of using spectrum resources, many countries including the U.S., the U.K. and Japan, have recently focused on the refarming plan of the low frequency bands according to the transition from analogue to digital TV. By the way, as a result of WRC-07, those parts of the band $698{\sim}960\;MHz$ in Region 2 and the band $790{\sim}960\;MHz$ in Regions 1 and 3 which are allocated to the mobile service on a primary basis are identified for use by administrations wishing to implement International Mobile Telecommunications (IMT). Therefore, after analogue to digital television switchover, some administrations may decide to use all or parts of the band $698{\sim}806/862\;MHz$ for other services to which the band is allocated on a primary basis, in particular the mobile service for the implementation of IMT, while in other countries the broadcasting service will continue to operate in that band. And to conclude, bands already identified for IMT-2000 will also be able to be used for IMT. This work will help establish a policy direction for spectrum refarming in the low frequency bands in Korea(Rep. of).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.675-676
• /
• 2012

In this paper, we are implemented the signal measurement system based on FPGA. The proposed hardware was mapped into Cyclone III from Altera and used 1,700(40%) of Logic Element (LE). The implemented circuit used 24,576-bit memory element with 6-bit input signal. The result from implementing in hardware (FPGA) could operate stably in 140MHz.

• Nuclear Engineering and Technology
• /
• v.38 no.8
• /
• pp.779-784
• /
• 2006

The design, manufacturing process, and first operating test of a high power RF source for a proton accelerator are described. A klystron amplifier system has been developed for operation at 700 MHz, 1 MW and is composed of a triode type electron gun, six cavities, an RF output window, a beam collector, and an electromagnet. The prototype klystron was constructed and tested at a reduced duty to produce the designed output RF power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.170-175
• /
• 2016

In order to transmit baseband signals through frequency dividing devices, we studied the transfer function of the device in the term of the baseband signal distortion. From the analysis, it is shown that the magnitude of the envelope signal is related to the mixer gain and the insertion loss of the low pass filter whilst the phase is the additional function with the 1/2 of the phase delay. For the purpose of the verification of the study, we designed a dynamic frequency divider at 1,400 MHz. The operating frequency range of the device is closely related to the conversion gain of mixers and the amplitude of input signal, and becomes wide as the conversion gain of mixers increases. The designed frequency divider operates between 0.9 GHz and 3.2 GHz, for -14.5 dBm input power. The circuit shows 20 mW power dissipation at $V_{DD}=2.5V$, and the simulation result shows that an amplitude modulated signal at 1,400 MHz with the modulation index of 0.9 was successfully downconverted to 700 MHz.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.1080-1090
• /
• 2012

This study investigates the users' preference of frequency reallocation and frequency auction after digital transition of terrestrial broadcasting and it focuses on the relationships between media using pattern, reception environment of broadcasting telecommunication, and expectation for the universal service and requirement for the public interest. The results show that the longer DMB viewing hours, people prefer to frequency allocation for the telecommunication side. The technical aspects such as perception on the reception environment of broadcasting don't make effect on the users' preference of frequency allocation. In addition, the more people think the universal service of terrestrial broadcasting important, the more people think it unnecessary to adopt auction system to the broadcasting frequency. These results give implication that it is the most basic condition to improve the reception environment in order to accomplish universal service duty of terrestrial broadcasting.