• 전력전자학회논문지
• /
• 제16권6호
• /
• pp.569-576
• /
• 2011

본 논문에서는 PWM 인버터에 적합한 새로운 데드타임 보상방법을 제안한다. 최근 PWM 인버터는 교류전동기, 분산전원용 계통연계 시스템, 정지형보상기 등의 다양한 산업에 사용되고 있다. 그러나 사용되는 전력용 소자의 비선형적인 특성과 데드타임에 의해 전력의 품질이 저하되고 전류에 고조파가 발생하게 된다. 데드타임에 의한 고조파는 정지좌표계상에서는 제 5, 7 고조파가, 동기좌표계상에서는 제 6 고조파가 가장 현저하다. 본 논문에서는 동기좌표계상에서 공진제어기를 사용하여 제 6 고조파를 보상하는 방법을 제안한다. 제안된 방법은 시스템의 안정도를 유지하면서도 데드타임에 의한 전류의 고조파를 억제하여 전력품질을 향상시킬 수 있고, 제 6 고조파를 검출하기 위한 별도의 연산이나 외부적인 하드웨어, 추가적인 실험이 필요하지 않다는 장점이 있다.

• The International Journal of Costume Culture
• /
• 제7권1호
• /
• pp.40-47
• /
• 2004

The purpose of this research was to examine the degradation rate of alizarin in accelerated degradation conditions using the GC-MS quantitative analysis. Alizarin dye solution (2.5 x 10/sup -3/ M conc.) were kept in 150℃ oven for total of 7 days and the degradation rate was examined each day. 2.5 × 10/sup -4/M conc. alizarin dye solution was mixed with H₂O₂ according to [H₂O₂]/[dye] ratio 40 and were kept under 365㎚ UV for 2 hours, analyzed after 0, 30, 60, 90, 120min using the GC-MS. Gas chromatogram showed alizarin peak at 9.96 - 10.13 min. retention time range and residual peaks in the wide range from 9.6 to 11.1 min. Oven degradation exhibited an initial decrease in the amount of alizarin, which was followed by increasing amount in 4/sup th/ day. The decrease in the alizarin was significantly shown by the 7/sup th/ day. Same pattern was also observed in the H₂O₂/UV/O₂ degradation samples and was verified ed by the UV-VIS spectra. The differences in the amount of alizarin between 1/sup st/ day and 4/sup th/ day samples, 4/sup th/ day and 7/sup th/ day samples, and Control and 7/sup th/ day samples of the oven degradation were significant at alpha .20.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.744-757
• /
• 2021

This study aims to develop a bodice and a jacket in 3D of the late 19th to early 20th based on the pattern drafting book of Gordon S. S., which contains body measurement method and pattern drafting system. The findings of this research are as follows. First, female tops of the late 19th to early 20th century are categorized as outer, jacket, vest, and bodice. Of these, this study highlights the jacket, which can be divided into 4 types: 4 kinds of basic jacket, 2 kinds of riding jacket, bolero jacket, and newmarket jacket. Second, by referring to Gordon's pattern drafting system and book, a bodice was developed in 3D format based on the adherence to the following steps: analysis of the pattern drafting system, pattern drafting, 3D virtual simulation, 3D virtual fitting analysis, and the pattern correction. A bodice pattern corrected by 3D virtual clothing simulation results was proposed. Last, a basic sleeve and collar pattern for a basic jacket was drafted, which was followed by the correction and transformation of the bodice pattern. The jacket developed shows great fit except for the issues at the armhole line and shoulder, which were caused by the unique shape of the sleeves(big sleeve head) of the time. The study attempted to develop the past costumes in 3D, providing the basis for interdisciplinary research in the field of fashion history field and suggesting a new approach for the virtual restoration of costumes. Future studies should target to 3D virtual simulation in accordance to the 3D avatar pose in the developed virtual costume.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.729-737
• /
• 2019

The world is now going through the era of the Fourth Industrial Revolution. Major global economies, including the United States, Germany, Japan and China, are fostering industries related to the fourth industrial revolution with policies and investments. South Korea is also setting up its fourth industrial revolution committee under the president, expanding policies and investment to foster industries related to the fourth industrial revolution, and increasing investment in research and development. Accordingly, government and private investment in industries and technologies related to the Fourth Industrial Revolution is made extensively around the world, and many related industries and technologies are being developed. In this paper, we will look into the status and problems of Advanced Concept Technology Demonstration projects that can quickly and easily introduce technologies related to the fourth industrial revolution in the private sector where many developments are taking place, and present the direction of development.

• 한국산업융합학회 논문집
• /
• 제25권1호
• /
• pp.21-26
• /
• 2022

When garlic is aged for a certain period of time while maintaining proper humidity, it causes a browning reaction by its own ingredients and enzymes. In this study, the physicochemical properties were analyzed by varying the temperature conditions for aging garlic. It was found that about 20% of the weight of garlic was reduced through the aging process. During the aging process, both samples showed the highest water content on the 10th day of aging, and the water content of the two samples was similar after the aging was completed. In the analysis of total sugar content change, AG1 (22.0±0.7 vs 21.4±0.6) showed a significantly higher sugar content on the 10th day of aging, but showed a tendency to gradually decrease thereafter, whereas AG2 showed a steady increase in sugar content during the aging process (18.7 < 21.4 < 21.7 < 22.3 < 23.7). The pH change that occurred during the aging process showed the most pH change on the 10th day. In AG1, the pH gradually decreased as the aging period increased, whereas in AG2, the pH increased significantly after the 10th day. In the analysis of browning, AG1 increased sharply on the 10th day and maintained the state, and AG2 showed a significant increase in browning according to the aging process. In conclusion, based on the results of this study, if various ripening temperature conditions are set, it is judged that it will play a positive role in improving the productivity of black garlic.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1069-1076
• /
• 2012

본 연구는 산업재해예방을 위해 산업안전보건교육의 방안을 개선하기 위해 기초자료를 제공하고자 실시되었다. 대상자는 강원도 소재 5개의 제조업 업체에 근무하는 근로자 167명을 대상으로 하였으며, 자료수집은 2010년 3월 15일부터 4월 15일 까지의 기간 동안에 구조화된 자기기입식 설문지를 이용하였다. 제조업 근로자의 76.6%가 교육장을 가지고 있었으나, 산업안전보건교육은 약 44.3%의 근로자가 현장사무실에서 교육을 받고 있었다. 교육 수단은 대부분 주입식 강의식으로 이루어지고 있었다. 산업안전보건교육은 근로자의 일반적 특성과 직무에 대한 고려 없이 이루어지고 있었다. 제조업의 근로자에게 실시되는 산업안전보건교육의 문제점을 개선하기 위하여 교육은 근로자의 일반적 특성과 직무를 고려한 교육이 실시되어야 한다.

• International Journal of Advanced Culture Technology
• /
• 제6권2호
• /
• pp.36-42
• /
• 2018

The types of sixth industry to aim of boosting agriculture and rural areas and Korea's sixth industrial cases(Local community, production-centric, distribution-centric, dine out-centric, treatment-centric, export-centric) and competitiveness measures through Japan and China. Specifically, the competitiveness through the sixth industrial case is to maximize added value through cooperation between communities and to coexist among local residents. Efforts are needed not only to create jobs for the elderly but also to gain consumer confidence, and various measures should be sought to establish a cooperative system. In addition, as customers ' needs change rapidly in the smart age, the life cycle of goods and services is getting extremely faster. Therefore, the sixth industry is expected to be able to predict changes in customer and market trends quickly and accurately, thus making efforts to bring new products and services to market more necessary and contributing to achieving rural activation.

• 한국포장학회지
• /
• 제1권1호
• /
• pp.51-61
• /
• 1995

This paper is discussed on the prospects of packaging industry and technologies of Japan for comming 21th century. It is clear that packaging industry depends on living style and social mechanizms. A trends of numerical consumption, amounts of money and composisition of packaging materials are one of a measure of development of packaging industry. Total consumption of packaging materials in Japan of 1965, 1980 and 1993 were $6,344.5{\times}10^3,\;15,898.7{\times}10^3\;and\;21,603.3{\times}10^3$ tons respectively and also, shipping money of packaging materials were $7,073{\times}10^{11},\;45,421{\times}10^{11}\;and\;63,902{\times}10^{11}$ yen, respectively. It is estimated from these data that the packaging industry is also increasing in future according of GNP of country. Compositions of packaging materials from 1965 to 1993, however, are somewhat changing according to development of new materials or social conditions such as platics packaging or wooden packaging materials. Technical forcasts of packaging industry are shown from view point of national living style, energy and resorces as well as environment of world based on forcasting committee of pulp & paper in Japan, report of research committee for the 21th packaging in JPI and materials of symposium in Kanagawa University in this paper. As a my conclusion, many functional packaging materials shall be developed in the future and accordingly Life Cycle Assesment plays a important role of packaging fields. Furthermore, I am estimating in future the new cellulosic materials such as nonwood fiber resources instead of paper, board, wooden containers and a part of plastic packaging materials shall be developed. This paper is constructed by three items as follow:

• International journal of advanced smart convergence
• /
• 제11권1호
• /
• pp.111-116
• /
• 2022

After COVID-19, the number of people with sleep disorders around the world is increasing. In particular, in the flow of the 4th industrial revolution, the differentiation of types and characteristics of the sleep industry is accelerating. Therefore, in this study, the characteristics of each type of sleep-related industry were reclassified from an industrial point of view, and based on this, an attempt was made to review the classification system that can help companies develop sleep products and improve related national systems. Based on the 10th standard industry classification, we compared input cost, value, and usability and analyzed common characteristics, treatments, and preventive effects based on this. A comprehensive taxonomy using matrix analysis was reviewed. As a result, in terms of cost (A), the most common sleeping products are general mattresses and general bedding. It is an IOT device (auxiliary device), and the value aspect (B, B/D) included sleep cafe, bedding rental and management service, and sleep consulting. In terms of utility (A/B), a total of 6 product groups including sleep aids (health functional foods) belong to this category, and in terms of treatment (A/C), a total of 3 product groups including sleep clinics (medical services) belong to this category. As for the product group (A/D) with both properties, it was found that non-insurance sleep treatment medical devices, sleep-related over-the-counter drugs, and some sleep monitoring applications belong to this category. Ultimately, it was found that the sleep industry classification enables the most active product development and composition according to the relative relationship between cost and utility, and treatment and utility. appeared to be necessary.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1293-1302
• /
• 2022

The relationship between homeownership and participation in giving and volunteering overall indicates that homeowners are more likely to give and participate in volunteering organizations than renters. This study compared 'giving and participation in volunteering between homeowners(n=6,078) and renters(3,587) in the 14^th Korean Welfare Panel Survey data collected in 2019. The outcome measure of study is a binary outcome of giving and volunteering participation. This study accounted for a bias arising from selection on observables. Specifically, this study employed a recursive bivariate probit model to simultaneously estimate respondents' participation in giving and volunteering participation and their selection of homeownership. Findings from this study have provided some evidence that homeowners and renters have different behaviors in giving and volunteering participation. Finally, issues relating to homeownership and social outcomes were discussed. Implications for social work practice and research were further discussed.