• 제목/요약/키워드: 6sigma

검색결과 1,210건 처리시간 0.025초

TRIZ 기법을 이용한 기업 혁신전략 (Innovation Strategy using the TRIZ Creativity in Industry)

  • 황인극;안영수;정락채
    • 한국산학기술학회논문지
    • /
    • 제9권5호
    • /
    • pp.1453-1459
    • /
    • 2008
  • 6 시그마의 취약점을 보완하기 위한 방법론으로 고려되는 것이 트리즈(TRIZ)이다. 6 시그마가 일하는 방식 즉 고객의 요구사항을 바탕으로 문제를 파악하는 방법이라면 트리즈는 생각하는 방식, 즉 문제를 해결하는 사고의 과정이다. 본 연구에서는 트리즈 방법론을 사용하여 6 시그마의 문제가 Define-Measure-Analyze- Improve-Control 단계를 통해 해결하는 것과 같이 Define-Analyze-Generate-Evaluate - Verify 단계를 통해 냉장고 온도 검사방법을 개선하는데 적용하여 보았다.

MgO 도프된 Rutile의 Polaron 전도도 (Polaron Conductivity of Rutile Doped with MgO)

  • 김규홍;김형택;최재시
    • 대한화학회지
    • /
    • 제31권3호
    • /
    • pp.215-224
    • /
    • 1987
  • 0.35. 0.75 및 1.25mol% $MgO-TiO_2$계의 전기전도도가 $600{\sim}1100^{\circ}C$$10^{-8}{\sim}10^{-1}$ atm의 산소분압하에서 측정되었다. 일정한 산소분압하에서 $log{\sigma}$ vs. 1/T은 두 온도구간에서 직선관계를 보였으며 직선의 기울기로 부터 계산된 활성화에너지는 본성 영역과 외성 영역에서 각각 1.94eV 및 0.48eV이다. $log\;{\sigma}$ vs log $Po_2$는 본성 영역에서 ${\sigma}\;{\alpha}\;$Po_2^{-1/6}$이며 외성 영역에서 ${\sigma}\;{\alpha}\;$Po_2^{-1/4}$이다. 이 계의 결함구조는 외성 영역에서 $V\"{o}$이며 본성 영역에서 $Ti^3$.로 제안되었다. 특히 외성 영역에서 polaron model이 ${\sigma}$의 T 및 p 의존성으로 부터 규명되었다.

  • PDF

ER2594 용착금속의 전기화학적 부식특성에 미치는 시그마상의 영향 (Effect of Sigma Phase on Electrochemical Corrosion Characteristics of a Deposited Metal of ER2594)

  • 정병호;김시영;서기정;박주영
    • 동력기계공학회지
    • /
    • 제19권6호
    • /
    • pp.75-81
    • /
    • 2015
  • A deposited metal specimen of ER2594 which is a super duplex steel welding wire used to investigate the effect of sigma(${\sigma}$) phase on electrochemical corrosion characteristics was prepared by gas tungsten arc welding. Aging treatment was conducted for the specimen at the temperature range of $700^{\circ}C$ to $900^{\circ}C$ for 5 to 300 minutes after annealing at $1050^{\circ}C$. Corrosion current density has decreased a little with an increase of aging time over 60 minutes at $700^{\circ}C$ to $900^{\circ}C$ and the uniform corrosion of deposited metal had more influence on the precipitation of ferrite than the precipitation of sigma phase. Therefore, the precipitation of sigma phase did not have much effect on the uniform corrosion. Pitting potential representing pitting corrosion has shown decreasing tendency as the precipitation of sigma phase increased. The degree of sensitization representing intergranular corrosion has shown increasing tendency as the precipitation of sigma phase increased at $700^{\circ}C$ to $800^{\circ}C$, while it has decreased at $900^{\circ}C$ for 60 to 300 minutes.

방향성을 고려한 영상 분해에 의해 개선된 시그마 필터 (Modified Sigma Filter by Image Decomposition Using Directivity.)

  • 구미란;한학용;최원태;강봉순;강대성
    • 융합신호처리학회논문지
    • /
    • 제11권2호
    • /
    • pp.151-156
    • /
    • 2010
  • 본 논문은 방향성을 고려한 영상 분해에 의해 개선된 시그마 필터의 영상 잡음 제거에 관한 연구이다. 기존의 시그마 필터는 계산의 복잡도 측면과 필터링의 정확도 면에서 좋은 결과를 보여 왔다. 그러나 시그마 필터는 높은 수준의 노이즈에서 작은 에지성분을 살리지 못하는 단점이 있다. 따라서 본 논문에서는 기존의 개선된 시그마 필터를 변형하여 새로운 방법을 제안한다. 제안된 알고리즘은 먼저 입력 영상을 수평, 수직 방향의 특성과 대각선 방향의 특성을 지닌 두 가지의 구성요소로 분해한 다음 분해된 2개의 구성요소에 대하여 HPF와 LPF를 적용한다. 적용 후 각각 독립적으로 기존의 시그마 필터로 필터링하여 출력 영상을 재구성함으로서 영상에 존재하는 잡음을 제거하고 영상의 에지성분에 대한 보존 특성을 강화시킨다. 실험에서의 비교 결과, 제안된 알고리즘의 PSNR이 시그마 필터에 비해 평균적으로 2.6dB, 개선된 시그마 필터에 비해 0.5dB 더 우수함을 확인하였고 비교적 큰 노이즈가 첨가되었을 때 기존의 두 필터보다 제안된 알고리즘이 훨씬 더 좋은 성능을 보였다.

산업폐수 방류수의 생태독성 평가 (Ecotoxicity Assessment of Industrial Effluent in Korea)

  • 오경택;김지원;김우근;이순애;윤홍길;이성규
    • 한국물환경학회지
    • /
    • 제22권1호
    • /
    • pp.37-44
    • /
    • 2006
  • Ecotoxicity assessments of 90 selected effluents of 22 industry types from 2002 to 2004 in Korea were evaluated by a toxic battery of bioassay test using fish Oryzias latipes, invertebrate Daphnia magna, algae Selenastrum capricornutum and bacteria Vibrio fischeri with the physicochemical measurement items and permit concentrations on the present Water Quality Conservation Act in Korea. Total toxic unit (${\Sigma}TU$) of 8 industry types of 22 industry types by the toxic battery appeared in order of the value site as follows; Pigment Dye Manufacturing (${\Sigma}TU$ 217.1) > Textile and Dye (${\Sigma}TU$ 39.3) > Semiconductor Electronic Manufacturing (Small) (${\Sigma}TU$ 25.6) > Wastewater and Sewage Treatment Plants (${\Sigma}TU$ 25.4) > Coating (${\Sigma}TU$ 23.8) > Leather Skin Manufacturing (${\Sigma}TU$ 18.0) > Synthetic Resin Manufacturing (${\Sigma}TU$ 15.6) > Assemble Metal Manufacturing (${\Sigma}TU$ 10.7). Our results demonstrate that ecotoxicity assessment, by bioassay test, is effective and practical for industrial wastewater management for 90 selected effluents with the limitation of the physicochemical permit. Among 90 effluents, 9 samples failed physicochemical permit limitation and 81 passed it. In result of ecotoxicity assessment of 90 effluents by the toxic battery, 76 effluents exhibited ecotoxicity and the others did not. The physicochemical measurement items and permit concentrations on the present Water Quality Conservation Act in Korea were low related to the ecotoxicity value by the toxic battery and appeared limited for water quality management to water-ecosystem and environment-friendly management of water.

6시그마를 활용한 ITSM 개선 사례 비교 연구 (A Comparative Case Study on Improvement of ITSM using 6 Sigma Technique)

  • 임수빈;황경태
    • 경영정보학연구
    • /
    • 제12권2호
    • /
    • pp.121-144
    • /
    • 2010
  • 최근 들어, IT 부문에서는 ITSM의 도입이 확산되고 있는데, ITSM의 성공을 위해서는 단순히 프로세스의 구축이나 솔루션의 도입만이 아니라 지속적인 개선이 필요하다. 이러한 지속적인 개선의 주요한 도구로 6시그마 기법이 활용되고 있다. 본 연구에서는 프로젝트 수준에서 성공 사례와 실패 사례를 비교 분석하여, ITSM의 지속적인 개선에 6시그마 기법을 성공적으로 적용하는데 영향을 미칠 수 있는 요인들을 식별한다. 이를 위해서 먼저, 문헌 분석을 통해 6시그마 기법 적용의 성공요인을 식별하여 분류하고, 이러한 성공요인들 중에서 본 연구의 목적과 내용에 부합하는 요인을 결정한다. 선별된 요인을 중심으로 성공 사례와 실패 사례를 비교 분석하여, 이러한 요인들이 6시그마를 활용한 ITSM 개선 프로젝트의 성공과 실패에 미치는 영향을 분석한다. 분석 결과, 경영층 및 중간관리자의 참여, 프로젝트 팀의 참여, 프로젝트 선정 및 검증, 고객 및 시장연계, 기업 전략 및 목표 연계 등 5가지 요인 모두가 성공 사례와 실패 사례 간에 차이가 있다는 것을 발견하였다.

6시그마 혁신활동에 있어서의 구성원 성공체험이 기업성과에 미치는 영향 (The effects of employee's success experience on business performance in six sigma activities)

  • 이난영;신익주
    • 품질경영학회지
    • /
    • 제37권3호
    • /
    • pp.10-17
    • /
    • 2009
  • This study developed a new model for evaluating effects about the success of six sigma activities. This model consists of four constructs such as success of six sigma, employee's success experience, customer satisfaction, and business performance. Structural Equation Modeling (SEM) is used to analyze causality among the four constructs. Hypothesis were tested through a field study conducted for one hundred and thirty-one project leaders, who were asked to evaluate their experiences of six sigma projects. The results indicate that six hypothesis are statistically significant. As a result, the success of six sigma doesn't influence the customer satisfaction directly, but it influences customer satisfaction indirectly through employee's success experience. We find out that control for employee's success experience is important as well as success of six sigma in business innovation. Otherwise business performance is influenced directly by success of six sigma, that is business performance isn't influenced directly by employee's success experience but influenced indirectly through customer satisfaction. This study found that the change management raising employee's success experience is important in Six Sigma.

중소기업을 위한 6시그마 모형 및 사례 연구 (A Six Sigma Model for Small and Medium SizedCompanies and Case Studies)

  • 황영제;권혁무;홍성훈;이민구
    • 대한산업공학회지
    • /
    • 제32권4호
    • /
    • pp.291-297
    • /
    • 2006
  • Since the six sigma strategy was first introduced to Korean enterprises in 1997, it has been taken as an important business strategy to strengthen the competitiveness of major Korean companies under the global competitive environment. These major companies also demand their suppliers to implement six sigma. But small and medium sized companies have several barriers to overcome for successful implementation of six sigma. First, the financial status is not so sound to support initial expenses for launching six sigma. Second, physical and human resources are not sufficient for driving six sigma. And finally, the infrastructure is not well established to manage and support the six sigma program. In this paper, we suggest a method to overcome these barriers and propose a model for establishing six sigma in a small and medium sized company. We also provide some practical case studies.