• Bulletin of the Korean Mathematical Society
• /
• v.34 no.2
• /
• pp.185-191
• /
• 1997

The notions of implicative semigroup and ordered filter were introduced by M. W. Chan and K. pp. Shum [3]. The first is a generalization of implicative semilattice (see W. C. Nemitz [6] and T. S. Blyth [2]) and has a close relation with the implication in mathematical logic and set theoretic difference (see G. Birkhoff [1] and H. B. Curry [4]). For the general development of implicative semilattice theory the ordered filters play an important role, which is shown by W. C. Nemitz [6].

• Journal of Astronomy and Space Sciences
• /
• v.14 no.2
• /
• pp.347-354
• /
• 1997

We developed a GPS phase data processing S/W system which calculates baseline vectors and distances between two points located in the surface of the Earth. For this development a Double-Difference mothod and L1 carrier phase data from GPS(Global positioning System) were used. This S/W system consists of four main parts: satellite position calculation, Single-Difference equation, Double-Difference equation, and correlation. To verify our S/W, we fixed KAO($N36^{circ}.37,E127^{circ}.37,H77.61m$), one of the International GPS Services for Geodynamics, which is located at Tae-Jon, and we measured baseline vectors and relative distances with data from observations at approximate baseline distances of 2.7, 42.1, 81.1, 146.6km. Then we compared the vectors and distances with the data which we obtained from the GPSurvey S/W system, with the L1/L2 ION-Free method and broadcast ephemeris. From the comparison of the vectors and distances with the data from the GPSurvey S/W system, we found baseline vectors X, Y, Z and baseline distances matched well within the extent of 50cm and 10cm, respectively.

• Korean Journal of Crystallography
• /
• v.12 no.4
• /
• pp.212-215
• /
• 2001

The hydrothermal reaction between manganese nitrate (Mn(NO₃)₂·H₂O ) and midzole-4,5-dicarboxylic acid(IDCH₂) in the presence of sodium acetate (NaOAC·3H₂O) gave a two-dimensional manganese-imidazoledicarboxylate coordination polymer with an empirical formula of [Mn(IDC)(H₂O)](1) Compound 1 was characterized by spectroscopy (IR) and X-ray diffraction. Crystal-lographic date for 1: orthorhombic space group, Pbca, a=7.257(5) Å b=13.687(5)Å, c=14.332(6)Å Z=8, R(wR₂)=0.0498(0.0999).

• Journal of Biosystems Engineering
• /
• v.31 no.4 s.117
• /
• pp.349-354
• /
• 2006

This study was performed to evaluate the performances for a concurrent flow rice dryer of pilot scale with devices for circulating rice. The pilot scale dryer with the capacity of 700 kg was developed to obtain design informations for the development of actual scale dryer of holding capacity of 10 tons. Three drying tests were conducted at two temperature levels of $100^{\circ}C\;and\;120^{\circ}C$, and two air flow rates levels of $28.5cmm/m^2\;and\;57.1cmm/m^2$. Drying conditions for Test-1, Test-2 and Test-3 were $100^{\circ}C\;-28.5cmm/m^2,\;120^{\circ}C-28.5cmm/m^2\;and\;120^{\circ}-57.1cmm/m^2}$ respectively. Drying rates were 0.73%(w.b./h) for Test-1, 0.90%(w.b./h) for Test-2 and 1.46%(w.b./h) for Test-3. The crack ratios of brown rice after drying ranged from 2.4% to 8.4%, and increased with the increase of drying rate and airflow rate. The energy consumptions were from 6,225 kJ/kg to 6,993 kJ/kg which was higher than that of conventional cross-flow rice circulating type dryer used in Korea. This results were due to the lower ambient air temperatures of $4.5^{\circ}C\;to\;13.4^{\circ}C$ during drying tests.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.103-108
• /
• 1999

A bacterium having strong fibrinolytic activity, S7-16 strain, was isolated from soil. The isolated bacterium was identified and named as Bacillus sp. S7-16. The optimal composition of the medium for the production of fibrinolytic enzyme by Bacillus sp. S7-16 was 0.5%(w/v) polypeptone, 0.5%(w/v) yeast extract, 0.3%(w/v) NaCl, 0.1% (w/v) $KH_2PO_4,\;0.3%(w/v)\;K_2PHO_4,\;and\;0.01%(w/v)\;MgSO_4{\cdot}7H_2O$. The optimal temperature and initial pH of the medium for the production of the enzyme were $35^{\circ}C$ and 7.0, respectively. The maximum production of the fibrinolytic enzyme was obtained after 24 hours of the incubation. Under the above conditions, the culture supernatant had strong fibrinolytic activity. Within pH4~11, the crude fibrinolytic enzyme was stable. The enzyme was stable up to $50^{\circ}C$. The optimum pH and temperature for the enzyme activity were around 7.5 and $40^{\circ}C$, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.323-328
• /
• 2006

The purpose of this paper was to investigate the reforming characteristics and optimum operating condition of the GlidArc-assisted $C_3H_8$ reforming reaction for the synthesis gas(SynGas) production without formation of carbon black from propane using GildArc plasma reforming. Also, in order to increase the hydrogen production and the propane conversion rate, 13 wt % nickel catalyst was filled into the catalytic reactor and parametric screening studies were conducted, in which there were the variations of vapor mole ratio$(H_2O/C_3H_8),\;CO_2$ mole ratio($CO_2/C_3H_8$), input power and injection flow rate. When the variations of vapor mole ratio, $CO_2$ mole ratio, input power and injection flow rate were 1.86, 0.48, 1.37 kW and 14 L/min, respectively, the conversion rate of the propane reached its most optimal condition, or 62.6%. Under the condition mentioned above, the dry basic concentrations of the SynGas were $H_2\;44.4%,\;CO\;18.2%,\;CH_4\;11.2%,\;C_2H_2\;2.0%,\;C_3H_6\;1.6%,\;C_2H_4\;0.6%\;and\;C_3H_4$ 0.4%. The conversion rate of carbon dioxide was 29.2% and the concentration ratio of hydrogen to carbon monoxide($H_2/CO$) in the SynGas was 2.4.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.2
• /
• pp.23-31
• /
• 2004

Trichloroethylene(TCE), Cr(VI), and nitrate removal efficiency of a novel reactive barrier were experimented, and the types of corrosion species that form on the surface of the iron and bentonite as a result of reaction were investigated with Raman spectrophotometer. The reactive barrier is composed of bentonite and zero valent iron(ZVI), and this can substitute conventional geosynthetic clay liners for landfill leachate. Tests were performed in batch reactors for various ZVI content (0, 3, 6, 10, 13, 16, 20, 30, 100 w/w %) and pH. The reduction rates and removal efficiencies of TCE, Cr(VI) and nitrate increase at pH 7 buffered solution. As ZVI content increases, TCE, Cr(VI) and nitrate removal efficiencies increase. From the result of analysis with Raman spectrophotometer, Fe-oxides were observed, which are strong adsorbers of cantaminants. Magnetite can be also beneficial to the long term performance of the iron metal.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.2
• /
• pp.112-116
• /
• 2001

The production of extracellular polysaccharide, EPS WN9, from Paenibacillus sp. and its suitability as a viscosity modifying admixture for cement mortar mixing were investigated. After 48h culture in an optimized medium, cell growth and EPS production were 1.2g/L and 4.0g/L, respectively. By adding EPS WN9 to mortar, it was possible to prepare a homogeneous mortar without material segregation and excess air entrapment. The optimal amount of EPS addition to mortar found to be 0.02 to 0.05%(w/w) of the cement used. Increasing the dosage of EPS WN9 from 0 to 0.05%(w/w) resulted in a setting retardation of 0.14h to 0.8h and an increase in the compressive strength of mortar of 10 to 20%.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.707-712
• /
• 1999

We have produced new-structured oligosaccharides using mixed-enzyme reactor of dextransucrase from Leuconostoc mesenterides B-512FMCM and ${\alpha}$-amylase. When the concentrations of sucrose and starch were 10%(w/v) and 5%(w/v), respectively, the maximum yield of oligosaccharides with both dextransucrase(100U) and ${\alpha}$-amylase(1000U) was 66.4%. The activity of dextransucrase in mixed-enzyme reactor was increased about 2.5 times by acceptor reaction with starch hydrolyzates. As the activities of dextransucrase:${\alpha}$-amylase were increased from 20U:200U to 500U:5000U, the amount of polymer was increased and the yield of oligosaccharides was decreased. By the addition of sucrose into mixed-enzyme reactor following the prehydrolysis of starch with ${\alpha}$-amylase, the yield was increased up to 12% compared with that of mixed-enzyme reactor without the addition of starch hydrolyzate. New structured-oligosaccharides showed heat resistance up to 140$^{\circ}C$ and was stable in acidic condition at pH 3~6.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.40-55
• /
• 1997

The purpose of this study are to examine the characters of the lower half body shape in the middle aged women and to make slacks patttern on the base of four difference body shapes as follows. The lower half body shapes were classified into 4 types on the basis of their lateral view silhouette, whose characters were summarized as followings. (1) "Type 1" meant the right body shape with the standard protrusion of abdomen and hips. (2) "Type 2" showed the body shape with prominent hips, which had the flat abdominal silhouette and the greatly curved hips silhouette. (3) "Type 3" was the body shape with the prominent abdomen and the flat hips, in which the frontal view silhouette of the abdomen was greatly curved and the rear view silhouette of hips is less curved. (4) "Type 4" was characterized with prominent abdomen and hips. The slaks patterns were based on the lower half body shape characters and resulted in followings. (1) In the type 1, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4{\times}0.5cm+0.5cm+fold(2.5cm) and the back waist girth W/4+0.5cm-0.5cm+dart(3.5cm). The front hip girth was defined as H/4+2.0cm+0.5cm and the back hip girth as H/4+2.0cm-0.5cm due to its increased ease amount produced by abdominal fat deposition. (2) In the type 2 experimental pattern, the front and back differences of the waist girth and the hip girth were defined as 1.0cm and 2.0cm separately. Accordingly, the front waist girth was W/4+0.5cm+ 1.0cm+fold(2.0cm), the back waist girth W/4+0.5cm-1.0cm+dart(6.5cm), the front hip girth H/4+2.0cm+1.0cm and the back hip girth H/4+2.0cm-1.0cm. (3) In type 3, the front waist girth was set up as W/4+0.5cm+0.5cm+fold (4.5cm) for the increased front fold amount and the back waist girth was W/4+0.5cm+0.5cm+dart(3.0cm). The front hip girth was made as H/4+2.5cm+0.5cm and the back hip girth H/4+2.5cm-0.5cm. (4) In type 4, considered were $\circled1$ the increased fornt fold amount due to the abdonimal protrusion, $\circled2$ the increased back dart amount and the decreased back dart length owing to the hips prominent and $\circled3$ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5cm+2.0cm+flod (5.0cm), the back waist girth as W/4+0.5cm-20.cm+dart(4.0cm), the front hip girth as H/4+2.0cm+1.0cm and the back hip girth as H/4+2.0cm-1.0cm. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.