• Journal of the Korean Magnetics Society
• /
• v.6 no.6
• /
• pp.388-396
• /
• 1996

Magnetic properties of sintered Fe-79Ni-4Mo cores made of centrifugal atomized powders were investigated. $H_{c}$ and $\mu_{a}$ of the cores sintered at $1350^{\circ}C$ for 2 hours measured at 60 Hz at a magnetic field of 10 Oe showed the best properties. Particularly the properties of $H_{c}$ and $\mu_{a}$ measured at low field (< 0.2 Oe) were found to increase with increasing the particle size of the core samples. It resulted from the domain wall motion depending on the grain size of sintered bodies. The best D, C magnetic properties of $H_{c}$ and $\mu_{max}$ were 0.085 Oe and 40000, respectively. A, C properties of the same cores showed the $\mu_{a}$ of 11000. The magnetic properties of sintered cores always exhibited an enhanced AC/DC performance by using the powders mixed with two different particle sizes. Those properties of cores are expected to apply for current transformer.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.4
• /
• pp.349-354
• /
• 2017

In this study, we proposed a design guideline of height-adjustable wash basin which is an assistive product for personal hygiene for persons with disability. We performed biomechanical assessments using both of conventional and prototype height adjustable wash basin. Total five elderly subjects (all male, age $68.6{\pm}4.3yrs.$, height $169.8{\pm}5.7cm$, weight $70{\pm}7.7kg$) participated for the assessment test. Each joint angles were measured by using a 3D motion capture system when subjects use wash basins, and the lumbar moment of each subjects was estimated based on a human body model. From the assessment results, a design guideline which has the range of the height from 652[mm] to 1162[mm] was proposed. Then additional assessment tests with five healthy subjects ($25.8{\pm}1.8yrs.$, $175.5{\pm}5.8cm$, $74{\pm}15.7kg$) were performed in order to verify effectiveness of the design guideline. The results showed a height-adjustable wash basin applied the proposed design guideline was effective to reduce the lumbar moment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.73-83
• /
• 2007

In this paper, we propose macroblock(MB)-based adaptive interpolation filter method for improving coding efficiency in H.264/AVC. In the proposed method, nine separable two-dimensional(2D) interpolation filters are applied for precisely compensating motions in various directions. The optimal cost function which considers the bit rate and distortion for coding the MB is defined. The filter is adaptively selected per MB for minimizing the defined cost function. In the experimental results, the proposed method shows more excellent in coding efficiency than the conventional methods for the various standard $QCIF(176{\times}144)/CIF(352{\times}288)$ video test sequences. It leads to about 6.25%(1 reference frame) and 3.46%(5 reference frames) bit rate reduction on average compared to the H.264/AVC.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.6
• /
• pp.25-36
• /
• 2018

Soil liquefaction is one of the types of major seismic damage. Soil liquefaction is a phenomenon that can cause enormous human and economic damages, and it must be examined before designing geotechnical structures. In this study, we proposed a practical method of developing a multi-hazard fragility surface for liquefaction of levee considering earthquake magnitude and water level. Limit state for liquefaction of levee was defined by liquefaction potential index (LPI), which is frequently used to assess the liquefaction susceptibility of soils. In order to consider the uncertainty of soil properties, Monte Carlo Simulation based probabilistic analysis was performed. Based on the analysis results, a 3D fragility surface representing the probability of failure by soil liquefaction as a function of the ground motion and water level has been established. The prepared multi-hazard fragility surface can be used to evaluate the safety of levees against liquefaction and to assess the risk in earthquake and flood prone areas.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.285-293
• /
• 2000

Age-related changes in the geometry of human lumbar spine would lead to changes of its mechanical behaviors. To investigate the effects of the geometric changes, no age-related changes in the material/mechanical properties were considered. Using the finite element method. two age-related models of lumbar spine segments (L3-L4) were constructed. The annulus of the models was modeled as laminate composite elements with 16 layers and 6 materials. The spinal stiffness and facet reaction of the lumbar spine increased with the age-related geometric changes in various combined loadings. Fiber and transverse tensile strains of the inner annulus. cancellous bone stress and end-plate stress decreased with the age-related geometric changes whereas fiber/layer compressive strains of the annulus. facet reaction. ligament reaction and end-plate rigidity increased. Consequently, it appears that in the normal age-related deterioration of discs, the age-related geometric change contributes to the increase of spinal stiffness (the decrease in range of the motion segment), preventing an excessive deformation of the disc.

• Journal of The Korean Astronomical Society
• /
• v.53 no.6
• /
• pp.161-168
• /
• 2020

We report the discovery of a giant exoplanet in the microlensing event OGLE-2017-BLG-1049, with a planet-host star mass ratio of q = 9.53 ± 0.39 × 10-3 and a caustic crossing feature in Korea Microlensing Telescope Network (KMTNet) observations. The caustic crossing feature yields an angular Einstein radius of θE = 0.52 ± 0.11 mas. However, the microlens parallax is not measured because the time scale of the event, tE ≃ 29 days, is too short. Thus, we perform a Bayesian analysis to estimate physical quantities of the lens system. We find that the lens system has a star with mass Mh = 0.55+0.36-0.29 M⊙ hosting a giant planet with Mp = 5.53+3.62-2.87 MJup, at a distance of DL = 5.67+1.11-1.52 kpc. The projected star-planet separation is a⊥ = 3.92+1.10-1.32 au. This means that the planet is located beyond the snow line of the host. The relative lens-source proper motion is μrel ~ 7 mas yr-1, thus the lens and source will be separated from each other within 10 years. After this, it will be possible to measure the flux of the host star with 30 meter class telescopes and to determine its mass.

• Hip & pelvis
• /
• v.34 no.4
• /
• pp.245-254
• /
• 2022

Purpose: Management of pediatric subtrochanteric femur fractures (SFFs) is difficult. The aim of this study was to evaluate the outcomes of adolescent SFFs treated with adult proximal humeral locking plates (PHLPs). Materials and Methods: A retrospective analysis of 18 adolescents (11 male, 7 female) with a diagnosis of SFF who underwent internal fixation with a PHLP was conducted. Data regarding injury mechanism, fracture pattern, and time to union were recorded for all patients. In addition, a clinical and functional evaluation of patients was performed using the Harris hip score (HHS), Iowa hip score (IHS), modified Merle d'Aubigne-Postel score (MMAPS), Flynn criteria, and hip range of motion (ROM). Results: The mean age of the patients was 12.72±2.05 years (range, 10-16 years). Radiological observation was performed for evaluation of five different injury mechanisms and different fracture patterns in patients. The mean postoperative HHS was 92.27±5.61, the mean IHS was 90.88±6.46, and the mean MMAPS was 17.22±0.94. According to the Flynn criteria, excellent results were achieved in 14 cases and satisfactory results were obtained in four cases. Measurements of the patients' mean hip ROM values were as follows: 17.77±3.52° in extension, 115.27±6.74° in flexion, 43.05±3.48° in abduction, 27.50±4.28° in adduction, 42.22±4.60° in internal rotation, and 42.22±3.91° in external rotation. Conclusion: Surgery performed on adolescent patients using an adult PHLP showed good, safe results. Therefore, it should be considered as an alternative option.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.125-139
• /
• 2008

The purpose of this study is to compare and analyze a kinematic characteristics of throwing performance among born visually impaired, postnatal visually impaired and visually correct people through their kinematic characteristics. Another purpose of this study is to prevent injury and improve blind's exercise leadership and physical abilities. Three video cameras were used and each camera's shooting velocity was 60field/sec. Then the longest thrown pose was collected and analyzed by using Kwon 3D ver. 3.1 program. The results obtained from this study were followings; 1. During release, the fastest speed of ball was visually corrected followed by postnatal visually impaired and then born visually impaired. 2. Visually corrected used wrist joint well and had wide body round range with similar motion patterns, however born visually impaired couldn't do this at all. 3. Visually corrected used waist to lead shoulder at Phase 2 while throwing ball, but some of born visually impaired and postnatal visually impaired couldn't use waist to lead shoulder. 4. Visually corrected looked at the way where ball would go, but blinds couldn't look where ball would go. 5. Not like visually corrected who show similar patterns, born visually impaired showed each different patterns and some postnatal visually impaired showed similar patterns with visually corrected. 6. While throwing ball, visually corrected showed flexible weight-movement, postnatal visually impaired were not good as visually corrected, and born visually impaired couldn't do weight-movement at all. Synthetically, this result showed that throwing motions are affected a lot by the time when people became blind.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.121-127
• /
• 2018

A system for diagnosing surface defects of long and large pipe inner overlay welds, 1m in diameter and 6m in length, was developed using a Liquid Penetrant Test (PT). First, CATIA was used to model all major units and PT machines in 3-dimensions. They were used for structural strength analysis and strain analysis, and to check the motion interference phenomenon of each unit to produce two-dimensional production drawings. Structural strength analysis and deformation analysis using the ANSYS results in a maximum equivalent stress of 44.901 MPa, which is less than the yield tensile strength of SS400 (200 MPa), a material of the PT Machine. An examination of the performance of the developed equipment revealed a maximum travel speed of 7.2 m/min., maximum rotational speed of 9 rpm, repeatable position accuracy of 1.2 mm, and inspection speed of $1.65m^2/min$. The results of the automatic PT-inspection system developed to check for surface defects, such as cracks, porosity, and undercut, were in accordance with the method of ASME SEC. V&VIII. In addition, the results of corrosion testing of the overlay weld layer in accordance with the ferric chloride fitting test by the method of ASME G48-11 indicated that the weight loss was $0.3g/m^2$, and met the specifications. Furthermore, the chemical composition of the overlay welds was analyzed according to the method described in ASTM A375-14, and all components met the specifications.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.85-95
• /
• 2005

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle during One Hand Backhand Stroke and Two Hand Backhand in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head direction were defined. 1. In three dimensional maximum linear velocity of racket head the X axis and Y axis(horizontal direction) showed $-11.04{\pm}2.69m/sec$, $-9.31{\pm}0.49m/sec$ before impact, the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball. It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. The stance distance between right foot and left foot was mean $75.4{\pm}5.86cm$ during one hand backhand stroke and $72.6{\pm}4.67cm$ during two hand backhand stroke. 2. The three dimensional anatomical angular displacement of trunk in interna rotation-external rotation showed most important role in backhand stroke. and is follwed by flexion-extension. the three dimensional anatomical angular displacement of trunk did not show significant difference between one hand backhand stroke and two hand backhand stroke but the three dimensional anatomical angular displacement of trunk was bigger than one hand backhand stroke. 3. while backhand stroke, the flexion-extension and adduction-abduction of right shoulder joint showed significant different between one hand backhand stroke and two hand backhand stroke. the three dimensional anatomical angular displacement of right shoulder joint showed more flex and abduct in one hand backhand stroke. 4. The three dimensional anatomical angular displacement of left shoulder showed flexion, adduction, and external rotation at impact. after impact, The angular displacement as adduction-abduction of left shoulder changed motion direction as abduction. angular displacement of left shoulder as flexion-extension showed bigger than the right shoulder.