• 제목/요약/키워드: 600km/h

검색결과 32건 처리시간 0.027초

Experimental Analysis of Wheel Radiation Noise of HANVIT 200 Train in Curve Lines (곡선부에서의 한빛 200 열차 차륜방사 소음 특성)

  • Lee, Chan-Woo;Kim, Jae-Chul
    • Proceedings of the KSME Conference
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.907-910
    • /
    • 2008
  • The wheel radiation noise characteristic of Korean tilting train(Hanvit 200) on curved rail under the field test conditions is analyzed in this paper. The test railroad track was selected from Seodaejon to Songjeongri in Honam line. $5^{th}$ and $6^{th}$ car are decided to measure radiation noise level among a train of six cars. The test subject curve radius executed from R400, R500, R600, R700 and R800 segments. The speed of test trains when from R600 and R800 curves existing operation speed and speed up 20% of existing speed. On curved rail at the time of operation speed of Hanvit 200 trains from below 95km/h wheel radiation noise level at $94dBA{\sim}99dBA$, the operation speed from between $100km/h{\sim}144km/h$ wheel radiation noise level at $100dBA{\sim}106dBA$.

  • PDF

유전공학기법으로 변형시킨 내성유전자네 대한 수질환경에서의 전이동태

  • 이성기;김치경
    • Korean Journal of Microbiology
    • /
    • 제30권4호
    • /
    • pp.322-331
    • /
    • 1992
  • In order to understand the transfer and behavior of R gene in water environments. the Kmr gene in the genetically modified microorganisms(GMMs) w,is studied by conjugation. The plasmid variously rearranged in the conjugants were comparatively analyzied by agarosc gel electrophoresis and the specific Km' genes in the gel were tletected with DNA probe. The Kmr genes of the GMM strains(DKC600 and DKC601) were transferred at higher rate than those of natural isola~e(DKI)b, ut the ratc was a little diflurent depending upon the recipient strains. Rearrangement of the plasmids appeared morc drastic in GMM strains than in IIKI as donor. The transfer frequencies of the Km' genes in LR broth were remarkably higher than in the water of AW and FW without regards to the strains. In LA breth. the frequencies of Kmr genes were higher at 25'C-30$^{\circ}$C than at 10$^{\circ}$C and at pH - 7 than pH 9, but temperature and pH of the FW did n,,t affect to the frequency. And the conjugants from GMM strains in FW did not showed any plasmids. except tor 43 kb plasmiil. As results of Southern analysis of the plasmid, variously rearranged in eonjugant cells obtained in LB broth, the Kmr genes were detected at the same position of Km' plasrnids of the donor cell(DK1 and GMM strains). But Km' plasmid disappeared in the conjugants obtained in F'W and their chronlosomes showed strong signal of hybridization. The Kmr plasmid of DKl in the conjugants obtained in FW water was transferred and maintained its size, but the Kmr plasinids of the GMM strains were all integrated into chromosome. Therefore, the Kmr plasmids of DKI anit GMM strains in LH were intactly transferred and other plasmitls were variously rearranged. but Km' gene of DKC600 in FW water was integrated into the chromosorn: without regards to the temperature and pH of the water.

  • PDF

Dynamic Behavior Analysis of PSC Train Bridge Friction Bearings for Considering Next-generation High-speed Train (차세대 고속철의 증속을 고려한 PSC 철도교 마찰 교량받침의 동적 거동 해석)

  • Soon-Taek Oh;Seong-Tae Yi
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • 제27권6호
    • /
    • pp.39-46
    • /
    • 2023
  • In this study, the dynamic behavior of friction bearings of PSC (Pre-Stressed Concrete) box train continuous bridge was numerically analyzed at 10 km/h intervals up to 600 km/h according to the increasing speed of the next-generation high-speed train. A frame model was generated targeting the 40-meter single-span and two-span continuous PSC box bridges in the Gyeongbu High-Speed Railway section. The interaction forces including the inertial mass vehicle model with 38 degrees of freedom and the irregularities of the bridge and track were considered. It was calculated the longitudinal displacement, cumulative sliding distance and displacement speed of the bridge bearings at each running speed so that compared with the dynamic behavior trend analysis of the bridge. In addition, long-term friction test standards were applied to evaluate the durability of friction plates.

Tracking of the $Km^r$ Gene in Conjugal Transfer by Using DNA Probe (DNA Probe에 의한 $Km^r$ 유전자의 전이 추적)

  • 이성기;김치경
    • Microbiology and Biotechnology Letters
    • /
    • 제20권4호
    • /
    • pp.483-490
    • /
    • 1992
  • In order to understand the transfer behavior of a particular gene in water environments, kanamycin resistance ($Km^r$) gene was tracked by Southern hybridization with DNA probe in its conjugal transfer. A $Km^r$ natural bacterial isolate and genetically modified microorganisms (GMMs) constructed from the isolate were used as donor for conjugal transfer of the $Km^r$ gene. The transfer frequencies of the $Km^r$ gene from GMM strains were generally 10 to 100 times higher than those from the natural isolate. The conjugants obtained from GMM strains in LB broth had more plasmids newly appeared, and particularly the conjugants in A Wand FW waters revealed more rearrangement in their plasmids as a function of conjugation time. When plasmids of the conjugants obtained in LB broth were Southern hybridized with DNA probe of the $Km^r$ gene, the $Km^r$ plasmids in the conjugants were detected at the same position of the plasmids in donor cells, in spite of the fact that the plasmids were highly rearranged in conjugant cells. But the $Km^r$ plasmids in the donor of DKI and DKC601, and DKC600 were not identified in the conjugants obtained after 50 h conjugation in AW and after 30 h in AW, respectively. The size of the $Km^r$ plasmids showing hybridization signal were a little changed in the conjugants obtained in A Wand FW waters. Therefore, the method of Southern hybridization with DNA probe was proved to be very specific and useful for tracking of particular genes in water environments.

  • PDF

Analysis of time-saving effects on increasing the speed through the trial run test in Gyeongbu line (틸팅시제열차 경부선 증속시험운행을 통한 시간단축효과분석)

  • Han, Seong-Ho;Lee, Su-Gil
    • Proceedings of the KSR Conference
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.1935-1942
    • /
    • 2011
  • We have tested the developed Korean tilting train in main exisiting commercial line for speed-up on cuve section to achive reduction effects of running time. We have conducted a trial run test to speed-up 30km/h on curves in Gyeongbu line successfully. Normal current train have been operated 110km/h in 600m radius. Yet, tilting train was tested 135km/h(maximum operation line speed) in same sections. We confirmed that the dynamic runing stability of train was safety by regarding wheel load and lateral force.

  • PDF

Handover Performance Improvement for LTE-R Network (LTE-R 네트워크에서 핸드오버 성능 개선)

  • Kim, Young-Dong
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • 제15권6호
    • /
    • pp.1017-1022
    • /
    • 2020
  • LTE-R(Long Term Evolution-Railway) for high speed railway system operation as an essential technology is based on LTE. Recently, moving speed of high speed train is on going to 600[km/h] level over commercial speed 400[㎞/h]. LTE-R as communication technology for a high speed railway system can be able to provide seamless communication to support moving speed for high speed railway system. In this study, a handover method based on prediction is suggested and performance of the suggested method is evaluated. Computer simulation based on NS(Network Simulator)-3 is used for this study.

Analysis of Design Parameters for Earthwork/Bridge Transition Structure for Ultra-High Speed Running (초고속 주행시 교량/토공 접속부 보강방안의 설계변수 분석)

  • Lee, Il-Wha;Lee, Sung-Jin;Lee, Su-Hyung;Lee, Kang-Myung
    • Journal of the Korean Society for Railway
    • /
    • 제18권2호
    • /
    • pp.117-126
    • /
    • 2015
  • The development of railway roadbed for 600km/h train speed level is very difficult because unpredictable static and dynamic interaction occurs between the ultra-high speed train and the infrastructure. Especially, an earthwork-bridge transition zone is a section in which influential factors react, such as bearing capacity, compression, settlement, drainage, and track irregularity; these interactions can include complicated dynamic interaction. Therefore, if static and dynamic stability are secured in transition zones, it is possible to develop roadbeds for ultra-high speed railways. In the present paper, design parameters for transition reinforcement applied to present railway design criteria are analytically examined for ultra-high speed usage on a preferential basis. Design parameters are the presence of reinforcing materials, geometric shape, stiffness of materials, and so on. Analysis is focused on the deformation response of the track and running stability at ultra-high speed.

유전공학적으로 변형시킨 R-plasmid 들의 전이에 미치는 균주와 pH 의 영향

  • 김희태;이성기;김치경
    • Korean Journal of Microbiology
    • /
    • 제30권2호
    • /
    • pp.88-95
    • /
    • 1992
  • The genetically engineered microorganisms (GEMS) could be released accidentally or ii)rexperimental purposes, as the genetic engineering, technique ha:. become very popular inany laboratories of biological sciences. But there have been littlt: informations on transkrbehavior of the genetically ~nodified genes in the natural en\ironmentx. In this stutly.antibiotic resistant bacteria were isolated from nat.ural waters. and then GEM strains wereconstructed i'rom the natural isolate (NI) by ~noclification oi' the Km' plasmitl. Thetransferability of the plasmids in the GEM and NI strains were examinetl by con-jugationin Luria-Bertani broth :it 30$^{\circ}$C. Also the cff'ccts 01' mating strain and pH on their transferfrequency and rearrangement of the plasmids in tl-~ec o~ijugantsM ere comp:irati\ely stuclictl.I'hc transkr frequency of Km' plasmid in donor of GEM and N1 strains wah similar a.;about 10 ' when co~ljugation was conducted wit11 M'I'I strain is recipient at pH 7. butthat of 1)KCOOI was lowered to 1.2X 10 '. And when the lab. stlain was uhccl as recipient.the transfer tendency of the plasmid was about same in both (;EM and NI strains usedas donor. All thc tionor 5trains. except for I)KC601. showecl the Ilighcs~ frequency of about10 ' at pH 7 and the frequcncics were lowered at both pH 5 and 9. Hut the mocliliedKm' plasmid in the cloned strain of DKC601 was transferred hy very low frequency of10 "at pH 5 ant1 7 comparing to other GEM strains. especiall! any co~~.jugantws ere notobtained at pH 4 and 9 even after conjugation for 6 hours. Rearrangement of the plasmidstranskrred into the lab. strain was not found in the conjugants. I\ulcornerut a lot of rearrangclncntwas ohservecl nlhen they were transferred into the NI strain. Such a rearrangement wasmore severe when donor was GEM strain rather then NI strain Hut such ;r phenomenonwas less affected by p!-l values.r phenomenon was less affected by p!-l values.

  • PDF

Development of 2.45GHz Microwave Identification System (2.45GHz 마이크로파 무선데이터 인식 시스템 개발)

  • 윤동기;박양하;김관호;이영철
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • 제24권7B호
    • /
    • pp.1342-1350
    • /
    • 1999
  • In this paper, we have developed and analyzed the 2.45GHz microwave RFID system. Which is composed tag and interrogator using custom IC, and we have made the software driving the hardware for the bidirectional data transmission method. Using 3.6V power supply was used, the optimal identification range in the information transmission of the designed microwave RFID system operating at 9,600bps was l0m. In the control circuit of the tag, the low current consumption of 15$mutextrm{A}$ and the tag data transmission rate of 90% when the moving velocity was 80km/h.

  • PDF

Studies on the Hydrolysis of Milk Fat by Microbial Lipases (미생물에서 추출된 Lipase의 유지방 분해)

  • Park, Jong-Hack;Lee, Young-Chun
    • Korean Journal of Food Science and Technology
    • /
    • 제17권2호
    • /
    • pp.60-64
    • /
    • 1985
  • To utilize microbial lipases for hydrolysis of milk fat, optimum reaction conditions and characteristics of enzymatic reactions of lipases originated from Rhizopus delemar, Mucor sp., and Candida cylindracea were investigated. Optimum pH and temperature were pH 5.6 and $45^{\circ}C$ for Rhizopus delemar lipase, pH7.5 and $35^{\circ}C$ for Mucor sp. lipase, and pH7.5 and $35^{\circ}C$ for Candida cylindracea lipase. Optimum lipase concentration and optimum substrate concentration were $600{\sim}800\;units/ml$ and 20% milk fat, regardless of their origin. Km values were 6.06% milk fat for Rhizopus delemar lipase, 7.69% for Mucor sp. lipase and 7.99% for Candida cylindracea lipase. Rate of lipid hydrolysis was Rhizopus delemar lipase>Mucor sp. lipase>Candida cylindracea lipase. As the reaction time was extended, liberation of short chain fatty acids was increased. After 8 hours reaction, capric acid content significantly increased with Candida cylindracea lipase, palmitic acid with Mucor sp. lipase and butyric acid with Rhizopus delemar lipase.

  • PDF