• 월간피드저널
• /
• 제3권9호통권25호
• /
• pp.110-115
• /
• 2005

우리나라 사료산업은 지난 60년 동안 품질면이나 물량면에서 고도의 성장을 이룩함으로서 사료산업 선진국이 된 것을 기쁘게 생각한다. 하지만 지금은 성장 둔화기에 접어들은 것이 사실이다. 하지만 농업분야 최대산업으로서의 사료산업은 앞으로도 지속적으로 발전할 것으로 전망하는 바이다. 이에 피드저널 창간 2주년 기념과 조국광복 60주년에 즈음하여 우리나라 사료산업의 60년사를 짚어보고자 한다. 편의상 사료산업의 태동기(1945$\~$1965

• Journal of electromagnetic engineering and science
• /
• 제15권3호
• /
• pp.142-150
• /
• 2015

Several reports supported that continuous exposure to 60 Hz magnetic field (MF) induces testicular germ cell apoptosis in vivo. We recently evaluated duration- and dose-dependent effects of continuous exposure to a 60 Hz MF on the testes in mice. BALB/c male mice were exposed to a 60 Hz MF at $100{\mu}T$ for 24 hours a day for 2, 4, 6, or 8 weeks, and at 2, 20 or $200{\mu}T$ for 24 hours a day for 8 weeks. To induce the apoptosis of testicular germ cell in mice, the minimum dose is $20{\mu}T$ at continuous exposure to a 60 Hz MF for 8 weeks, and the minimum duration is 6 weeks at continuous exposure of $100{\mu}T$. Continuous exposure to a 60 Hz MF might affect duration- and dose-dependent biological processes including apoptotic cell death and spermatogenesis in the male reproductive system of mice. The safety guideline of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) indicates that the permissible maximum magnetic flux density for general public exposure is $200{\mu}T$ at 60 Hz EMF (ICNIRP Guidelines, 2010). In the present study, we aimed to examine the expression of pro- and anti-apoptotic genes regulated by the continuous exposure to 60 Hz at $200{\mu}T$ in Sprague-Dawley rats for 20 weeks. The continuous exposure to 60 Hz at $200{\mu}T$ does not affect the body and testicular weight in rats. However, exposure to 60 Hz MF significantly affects testicular germ cell apoptosis and sperm count. Further, the apoptosis-related gene was scrutinized after exposure to 60 Hz at $200{\mu}T$ for 20 weeks. We found that the message level of endonuclease G (EndoG) was greatly increased following the exposure to 60 Hz at $200{\mu}T$ compared with sham control. These data suggested that 60 Hz magnetic field induced testicular germ cell apoptosis through mitochondrial protein Endo G.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.1-9
• /
• 2021

A60급 갑판 관통 관은 선박과 해양플랜트의 화재 발생 시 인명의 보호와 화염전파를 방지하기 위해 갑판 구획에 설치되는 방화 장치이다. A60급 갑판 관통 관이 새로 개발되거나 기존의 설계가 변경될 경우 국제해사기구의 화재시험절차 규정에 따라 A60급 갑판 관통 관의 방화성능을 검증하도록 요구하고 있다. 따라서, 본 논문에서는 신규 개발된 선박과 해양플랜트용 A60급 갑판 관통 관의 방화 설계의 적합성을 평가하기 위해 과도 열전달 해석을 수행하였고, 화재시험을 통해 해석결과의 타당성을 검증하였다. 또한 A60급 갑판 관통 관의 열전달 특성은 관의 직경, 내부형상 그리고 재질과 같은 설계 사양에 따라 비교하여 검토하였다. 과도 열전달 해석은 범용 유한요소법 소프트웨어인 ABAQUS/Implicit를 사용하여 수행하였으며, 해석결과의 검증을 위한 화재시험은 해사안전위원회에서 규정한 화재시험절차 코드에 따라 수행하였다. 본 연구에서 검토한 A60급 갑판 관통 관의 방화성능은 국제 해상안전규정을 만족하였고, 재질 사양의 설계가 중요한 것으로 나타났다. 최대 시험온도를 기준으로 SUS316L 재질의 측정온도는 S45C 재질보다 평균적으로 25% 낮게 나타났고, 이때 각 재질의 열전도계수와 비열의 차이는 각각 17%와 58%였다.

• Composites Research
• /
• 제12권4호
• /
• pp.8-16
• /
• 1999

본 연구는 인장하중의 방향변화에 따른 의사 등방성 복합재 적층판의 피로손상거동의 변화에 대하여 알아보았다. [0/-60/＋60]$_s$ 적층판과 [＋30/-30/90]$_s$ 적층판의 저 싸이클 피로시험을 행하였고, 재료계는 AS4/Epoxy와 AS4/PEEK를 사용하였다. [＋30/-30/90]$_s$ 적층판의 피로손상은 [0/-60/＋60]$_s$ 적층판에 비하여 아주 달랐다. AS4/Epoxy와 AS4/PEEK [＋30/-30/90]$_s$ 적층판에 발생한 층간분리의 위치가 모재의 종류에 따라 다르게 나타났다. 층간분리 진전시 측정된 변형률을 사용하여 임계 변형률 에너지 해방률을 계산하였다. 실험결과를 모드별 변형률 에너지 해방률의 제안된 계산법으로 얻어진 해석 결과와 비교한 결과, 잘 일치되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.645-645
• /
• 2013

Applying a first-principles computational approach combining density-functional theory and matrix Green's function calculations, we have studied the effects [2+2] cycloaddition olligormerization of fullerene $C_{60}$ chains on their junction charge transport properties. Analyzing first the microscopic mechanism of the switching realized in recent scanning tunneling microscope (STM) experiments, we found that, in agreement with experimental conclusions, the device characteristics are not significantly affected by the changes in electronic structure of $C_{60}$ chains. It is further predicted that the switching characteristics will sensitively depend on the STM tip metal species and the associated energy level bending direction in the $C_{60}-STM$ tip vacuum gap. Considering infinite $C_{60}$ chains, however, we confirm that unbound $C_{60}$ chains with strong orbital hybridizations and band formation should in principle induce a much higher conductance state. We demonstrate that a nanoelectromechanical approach in which the $C_{60}-STM$ tip distance is maintained at short distances can achieve a metal-independent and drastically improved switching performance based on the intrinsically better electronic connectivity in the bound $C_{60}$ chains.

• Journal of Pharmaceutical Investigation
• /
• 제25권3호spc1호
• /
• pp.43-51
• /
• 1995

The in vitro skin permeability of 16 drugs with a wide span of lipophilicity (log P ranging from -0,95 to 4.40) was evaluated with an ethanol/panasate 800 (tricaprylin, P-800) (40/60) lipophilic binary vehicle and an ethanol/water (60/40) hydrophilic binary vehicle with lauric acid, The skin permeability of the drugs was enhanced by the use of the ethanol/P-800 (40/60) binary vehicle or the ethanol/water (60/40) binary vehicle with lauric acid; permeation rate was increased and lag time' was decreased. The relationship between lipophilicity and skin permeation rate of the drugs showed parabolic shapes with their peaks at much greater hydrophilic range compared with other past references. In the in vivo skin absorption of theophylline using abdominal rat skin, the ethanol/P-800 (40/60)-7% (w/w) ethycellulose gel produced a good feature as a sustained-release preparation, and the ethanol/water (60/40)-3 % (w/w) HPMC gel with lauric acid showed the highest BA value. The results suggest that the lipophilicity of a drug is a main factor for prediction of the skin permeability of the drug and that the ethanol/P-800 (40/60) binary vehicle and ethanol/water (60/40) binary vehicle with lauric acid would be good candidates for clinical transdermal application of hydrophilic drugs.

• 대한의생명과학회지
• /
• 제8권1호
• /
• pp.13-20
• /
• 2002

Asadisulphide were purified from Ferrula assafoetida by organic solvent extraction and chromatography. Since ethyl acetate extracts of F. assafoetida has the strongest inhibitory effects on adherence of HL-60 cells, it was reextracted with ethyl acetate, hexane, and ethyl ether and chromatographed three times to isolate asadisulphide. HL-60 cells were grouped into untreated control, TPA-treated, asadisulphide-teated and TPA＋asadisulphide-treated groups, and structural changes of these cells were observed using light microscope, scanning electron microscope and transmission electron microscope to examine the inhibitory effects of asadisulfide on the TPA-induced adherence of HL-60 cells. Light microscopic observations showed that asadisulphide has inhibitory effects on the cell aggregation, extention of cytoplasmic processes and inhibition of substrate adhesion of HL-60 cells. Using scanning and transmission electron microscope, it was observed that cell surfaces and several ultrastructures of TPA-treated HL-60 cell were different from control group, while there were no remarkable differences between asadisulphide-treated and TPA＋asadisulphide-treated group. These results could suggest that asadisulphide has the inhibitory effects on the TPA-induced structural changes of HL-60 cells.

• Restorative Dentistry and Endodontics
• /
• 제2권1호
• /
• pp.50-54
• /
• 1976

16 healthy teeth extracted have been selected and their color and structural change have been observed at the fixed temperatures of $200^{\circ}F$., $400^{\circ}F$., $600^{\circ}F$., and $800^{\circ}F$. respectively at the intervals of 10min. 30min and 60min. The results were as follows: 1) $200^{\circ}F$ Groop: At the 60 minutes interval, crown surface shows pattern simliars to mottled teeth and roots take on light yellowish colar and interglobular dentin tends to be rough. 2) $400^{\circ}C$ Groop: at the 30 minutes interval, cracks begin to show in the direction of long axis of the teeth and crown surface have been observed on the verge of fracture at the 60 minutes interval. 3) $600^{\circ}F$ Groop: Crowns take on grayish-white color thoroughout 10, 30 and 60 minutes intervals and roots reveal black color. Moreover the seperation of enamel from dentin has been confirmed at the 60 minutes interval and inner dentin has changed black. 4) $800^{\circ}F$ Groop: Crowns take on the same grayish-white color as at the $600^{\circ}F$ at the 10, 30 and 60 minutes intervals and roots reveal gray color at the 30 and 60 minutes intervals, while parts of the crown have fractured at the 10 minutes interval. Inner dentin has turned gray at the 60 minutes interval.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1590-1610
• /
• 2016

The challenge of penetrating obstacles along with impact from weak multipath effects makes 60GHz signal very difficult to be transmitted in non-line of sight (NLOS) channel. So 60GHz system is vulnerable to obstructions and thus likely results in link interruption. While the application of cooperative technology to solve link blockage problemin 60GHz system should consider the characteristic of directional transmission for 60GHz signal. Therefore in this paper a system is proposed to solve the link blockage problem in 60GHz NLOS communication environment based on the concept of cooperation and also the beamforming technology, which is the basis of directional transmission for 60GHz communication system. The process of anti-blockage solution with cooperative communication is presented in detail, and the fast switching and recovery schemes are well designed. The theoretical values of symbol error rate (SER) using decode and forward (DF) cooperation and amplify and forward (AF) cooperation are presented respectively when the common channel interference exists. Simulation results demonstrate that the performance based on DF cooperation is better than the performance based on AF cooperation when directional transmission is used.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.253-259
• /
• 2015

The fast neutron reactor BOR-60 is one of the key experimental facilities worldwide to perform large-scale tests of fuel, absorbing, and structural materials for advanced reactors. The BOR-60 reactor was put into operation in December 1969, and by the end of 2014 it had been operating on power for ~265,000 hours. BOR-60 still demonstrates potential capabilities to extend the lifetime of sodium-cooled fast reactors. The BOR-60 lifetime should have expired at the end of 2014. Over the past few years, a great scope of work has been performed to justify the possibility of extending its lifetime. The work included inspection of the equipment conditions, calculations and experimental research on operating parameters and the conditions of nonremovable components, investigation of the structural material samples after their long-term operation under irradiation, etc. Based on the results of the work performed, the residual lifetime was evaluated and the reactor operator made a decision to extend the lifetime period of the BOR-60 reactor. After considering both a set of documents about the reactor conditions and the positive decision of independent experts, the Regulatory Authority of the Russian Federation extended the BOR-60 operating license up to 2020.