• Korean Journal of Poultry Science
• /
• v.18 no.2
• /
• pp.85-95
• /
• 1991

The investigation concerned an effect of the ground charcoal powder and organic acids on the digestibilities of protein and energy or the contents of uric acid, ammonia, creatine and urea in excreta of 113 week-old White Leghorn strain layers. Birds were fed basal (control) diet composed of mainly corn-soybean meal during a week of previous feeding and subsequent experimental diets during 12 weeks of experimental feeding . The experimental diets were the control diet(CON). diet(CPD) substituted 0.5% of the ground charcoal powder with the defatted rice bran of the CON, diet(PWV) added 0.1mM(based on the acetic acid) wood vinegar in the CPD and diet(PFA) added 0.1mM (based on the acetic acid) fermented acetic acid in the CPD. Birds fed CPD excreted significantly(P＜0.05) more fecal nitrogen(FN) and lower urinary nitrogen (UN) than those of birds fed CON. Digestibility of protein was lower significantly (P＜ 0.05) in CPB-fed bird than in bird fed CON. while birds fed CON. PWV and PFA showed similar values. Also urinary nitrogen per nitrogen intake (UN/NI) or absorbed nitrogen (UN/AN) was significantly (P＜0.05) lower in birds fed CPD compared with those in birds fed CON. And birds fed PWV tended to increase UN/NI and UN/AN, while PFA-fed birds excreted significantly (P＜0.05) higher UN/Nl and UN/Ah than those of birds fed CPD diet. The uric acid nitrogen (UAN) per nitrogen intake (UAN/NI) or absorbed nitrogen (UAN/AN) were lower significantly(P＜0.05) in CPD-fed birds and were tended to decrease in birds fed PWV compared with those in birds fed CON and PFA The ammoniacal nitrogen(AMN) per nitrogen intake (AMN/NI) or absorbed nitrogen (AMN/NI) was tended to increase in birds fed experimental diets and was increased significantly(P＜0.05) in birds fed PFA compared with those of birds fed CON. The excretion of creatine and urea nitrogen per nitrogen intake or absorbed nitrogen was shown similar values among birds fed experimental diets Digestibility of energy (DE/GE) was not shown any significant effect of experimental diet and were in the range of 80~84%. But metabolizability (ME/GE or MEn/GE) was increased in birds fed CPD and PWV and was decreased in birds fed PFA compared with those in birds fed CON. Although birds fed PWV showed significantly(P＜0.05) higher ME/GE than bird fed PFA, the MEn/GE were higher significantly (P＜0.05) in birds fed CON and CPD compared with that in birds fed PFA. Fecal energy affects 10~23% in the change of metabolizability though significant effect of fecal energy on the metabolizability were not found. But the effect of urinary energy on the metabolizability of diet was lowered as 2.3~3, 0% and the effect of experimental diets on the metabolizability of diets was due to change of urinary energy which also was originated from the change of uric acid energy.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.320-334
• /
• 2020

This study presents an application of hydro-mechanical coupled Particle Flow Code 3D (PFC3D) to simulation of fluid injection induced fault slip experiment conducted in Mont Terri Switzerland as a part of a task in an international research project DECOVALEX-2019. We also aimed as identifying the current limitations of the modelling method and issues for further development. A fluid flow algorithm was developed and implemented in a 3D pore-pipe network model in a 3D bonded particle assembly using PFC3D v5, and was applied to Mont Terri Step 2 minor fault activation experiment. The simulated results showed that the injected fluid migrates through the permeable fault zone and induces fault deformation, demonstrating a full hydro-mechanical coupled behavior. The simulated results were, however, partially matching with the field measurement. The simulated pressure build-up at the monitoring location showed linear and progressive increase, whereas the field measurement showed an abrupt increase associated with the fault slip We conclude that such difference between the modelling and the field test is due to the structure of the fault in the model which was represented as a combination of damage zone and core fractures. The modelled fault is likely larger in size than the real fault in Mont Terri site. Therefore, the modelled fault allows several path ways of fluid flow from the injection location to the pressure monitoring location, leading to smooth pressure build-up at the monitoring location while the injection pressure increases, and an early start of pressure decay even before the injection pressure reaches the maximum. We also conclude that the clay filling in the real fault could have acted as a fluid barrier which may have resulted in formation of fluid over-pressurization locally in the fault. Unlike the pressure result, the simulated fault deformations were matching with the field measurements. A better way of modelling a heterogeneous clay-filled fault structure with a narrow zone should be studied further to improve the applicability of the modelling method to fluid injection induced fault activation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.5-9
• /
• 2004

In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A／D converter. The resolution of the OCT system is about 30$\mu\textrm{m}$ which corresponds to the theoretical resolution. Also, the cross-sectional image of ping-pong ball is measured. The OCT system is configured with Michelson interferometer which has a low contrast because of reducing the power of feedback interference light. Such a problem is overcomed by using the improved inteferometer. Also, in order to obtain the cross-sectional image within a short time, it is necessary to reduce the measurement time for improving the optical delay line.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.4
• /
• pp.336-344
• /
• 2015

BACKGROUND: This study was carried out to collect occurrence data on aluminum in 12 type agricultural products and assess dietary exposure risk to the Korean population health for aluminum concentration in agricultural products.METHODS AND RESULTS: Aluminum analysis samples were performed using microwave device and Inductively Coupled Plasma Optical Emission Spectrometer. The LOD(Limit of Detection) for aluminum was 0.851 μg/kg, while the LOQ(Limit of Quantitation) was 2.838 μg/kg and recovery was 97.6% for aluminum. The average levels of aluminum in mg/kg were 0.526 for rice, 0.546 for Korean cabbage, 1.316 for corn, 6.207 for soybean, 0.549 for sweet potato, 0.257 for potato, 6.963 for spinach, 1.213 for carrot, 0.524 for garlic, 0.950 for radish, 1.015 for leek, and 3.511 for Welsh onion. The dietary exposures of aluminum through usual intake were polished rice 89.31 μg/day, Korean cabbage 33.14 μg/day, corn 0.66 μg/day, soybean 3.72 μg/day, sweet potato 6.86 μg/day, potato 4.96 μg/day, spinach 45.96 μg/day, carrot 6.79 μg/day, garlic 2.36 μ g/day, radish 7.32 μg/day, leek 2.23 μg/day and Welsh onion 43.89 μg/day, taking 0.57%, 0.21%, 0.00%, 0.02%, 0.04%, 0.03%, 0.04%, 0.04%, 0.02%, 0.05%, 0.01% and 0.28% of PTWI(2 mg/kg b.w./week), respectively.CONCLUSION: The levels of overall dietary exposure to aluminum for Korean population through intake of agricultural product was far below the recommended JECFA level, indicating of least possibility of risk.

• Journal of Fashion Business
• /
• v.2 no.3
• /
• pp.137-156
• /
• 1998

In this study, the researcher studied the historical background, and the traditional culture about dress and ornament of Yunnan Province of China, The results of the study are as follows. 1. Dress and personal ornaments of the Va peoples vary with the locality. Their traditional dress and adornment is characterized by those in the Ximeng area. Men usually wear black or dark blue collarless jackets and black and dark blue loose and short bagged trousers with folding waist. Women usually wear close-fitting sleeveless pullover blouses with V-shaped necks and straight skirts with patterns of red and black cross stripes. 2. Jingpo men have changed to wear shirts with button down the front and trousers. They also entwine white turbans with red bobbles on both ends, and carry diagonally long knives, firelocks and red woolen figured satchels on their shoulders. Women usually wear black velvet blouses with silver bowl-shaped ornaments and chains around collars and on the fronts. They also wear red straight skirts with overlapped slit on the right, waistbands and waist hoops made of rattan and bamboo. 3. The Naxi nationality has a long history and excellent traditional culture. In modern times, women like to wear red, blue or purple laced blouses, long double-layered pleated skirts, waistbands and embroidered shoes. They wear their hair in buns with either hats or kerchiefs over them. While working or going out, they put on their "seven-star" capes made of sheepskin and embroidered with two big circles and seven small ones, while is a symbol of their frog totem. 4. The dress and adorment of the Jinuo people is simple, elegant and has its own unique characteristics. Men usually wear white buttonless shirts with round necks and an opening on the front, knee-length bagged trousers and legging. They wear cloth turbans, earrings and also put small bamboo or silver pipes in the holes of their earlobes. Women wear short buttonless blouses with round necks and seven coloured stripes and thin tight-fitting or embroidered triangular underwear. 5. The dress and ardorment of the Benglong (De' ang) nationality has its own strong national colour. Most of the men wear jackets with buttons arranged diagonally on the front, loose, short trousers and black or white turbans. Some young men like to wear eardrops and silver necklaces. Women's dress and adornment differs according to various branches. For example, the women of the Bielie and Liang branches have their hair shaved and wear black turbans. They use large square silver tablets as buttons and wear blue or black blouses with buttons down the front. 6. Oai men usually wear trousers, white or blue cloth turbans and round-necked shirts with buttons down the front or arranged diagonally on the front. Women usually wear long straight skirt and blouses. But dress and adornment varies in regions. 7. The Bai nationality dress and adornment has unique national style. The dress fabrics are mainly cotton cloth, silk and velvet. Men usually wear red velvet vests over white shirts with buttons down the front or black velvet vests over light blue shirts. They also wear white of blue turbans and carry satchels with beautiful embroidered designs over their shoulders. Women usually wear red velvet vests over white blouses, or black vests over light-coloured blouses.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.6
• /
• pp.701-707
• /
• 2008

Antidiabetic effect of Korean red ginseng (RG) processed by puffing in streptozotocin (STZ)-induced diabetic (DM) rats was investigated. Five week-old SD rats were divided into four groups; normal control (NC) group, DM group, red ginseng (RG) group and puffed red ginseng (PG) group. The RG and PG groups were orally provided with RG or PG dissolved in water (500 mg/kg) respectively for seven weeks after single injection of STZ (50 mg/kg, i.v.) followed by identification of DM. NC group received saline vehicle instead of STZ. At the end of feeding of RG or PG, the changes of fasting blood glucose, serum insulin and amylase level and serum lipid profiles were evaluated. Also, oral glucose tolerance test (OGTT), comet assay and histopathological examination were performed. At 7th week, the fasting blood glucose levels of the RG and PG groups were reduced compared to the DM group by 11.54% and 20.22%, respectively. The result of OGTT did not show significant differences among DM and two red ginseng groups. While serum insulin and TG levels were predominantly improved in PG group (p<0.05), serum amylase level was increased in RG group. Alkaline comet assay for checking the oxidative damage of DNA showed that TL (tail length, ${\mu}m$) and TM (tail moment) in the blood lymphocyte of PG group significantly decreased in contrast with DM group. Histopathological results of pancreas showed that destruction of exocrine as well as endocrine might be cured by the administration of RG and PG. These results suggest that PG could exert more protection against STZ-induced toxicity than RG group.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.13-20
• /
• 2008

The flow rate measurements in a multi-phase flow pipeline were evaluated quantitatively by means of a clamp-on sealed radioisotope based on a cross correlation signal processing technique. The flow rates were calculated by a determination of the transit time between two sealed gamma sources by using a cross correlation function following FFT filtering, then corrected with vapor fraction in the pipeline which was measured by the ${\gamma}$-ray attenuation method. The pipeline model was manufactured by acrylic resin(ID. 8 cm, L=3.5 m, t=10 mm), and the multi-phase flow patterns were realized by an injection of compressed $N_2$ gas. Two sealed gamma sources of $^{137}Cs$ (E=0.662 MeV, ${\Gamma}$ $factor=0.326\;R{\cdot}h^{-1}{\cdot}m^2{\cdot}Ci^{-1}$) of 20 mCi and 17 mCi, and radiation detectors of $2"{\times}2"$ NaI(Tl) scintillation counter (Eberline, SP-3) were used for this study. Under the given conditions(the distance between two sources: 4D(D; inner diameter), N/S ratio: $0.12{\sim}0.15$, sampling time ${\Delta}t$: 4msec), the measured flow rates showed the maximum. relative error of 1.7 % when compared to the real ones through the vapor content corrections($6.1\;%{\sim}9.2\;%$). From a subsequent experiment, it was proven that the closer the distance between the two sealed sources is, the more precise the measured flow rates are. Provided additional studies related to the selection of radioisotopes their activity, and an optimization of the experimental geometry are carried out, it is anticipated that a radioisotope application for flow rate measurements can be used as an important tool for monitoring multi-phase facilities belonging to petrochemical and refinery industries and contributes economically in the light of maintenance and control of them.

• Radiation Oncology Journal
• /
• v.23 no.1
• /
• pp.51-60
• /
• 2005

Purpose : Selective inhibition of multiple molecular targets may improve the antitumor activity of radiation. Two specific inhibitors of selective cyclooxygenase-2 (COX-2) and epidermal growth factor receptor (EGFR) were combined with radiation on the HeLa cell line. To investigate cooperative mechanism with selective COX-2 inhibitor and EGFR blocker, in vitro experiments were done. Materials and Methods : Antitumor effect was obtained by growth inhibition and apoptosis analysis by annexin V-Flous method. Radiation modulation effects were determined by the clonogenic cell survival assay. Surviving fractions at 2 Gy ($SF_2$) and dose enhancement ratio at a surviving fraction of 0.25 were evaluated. To investigate the mechanism of the modulation of radiosensitivity, the cell cycle analyses were done by flow cytometry. The bcl-2 and bax expressions were analyzed by western blot. Results : A cooperative effect were observed on the apoptosis of the HeLa ceil line when combination of the two drugs, AG 1478 and NS 398 with radiation at the lowest doses, apoptosis of $22.70\%$ compare with combination of the one drug with radiation, apoptosis of $8.49\%$. In cell cycle analysis, accumulation of cell on $G_0/G_l$ phase and decrement of S phase fraction was observed from 24 hours to 72 hours after treatment with radiation, AG 1478 and NS 398. The combination of NS 398 and AG 1478 enhanced radiosensitivity on a concentration-dependent manner in HeLa cells with dose enhancement ratios of 3.00 and $SF_2$ of 0.12 but the combination of one drug with radiation was not enhanced radlosensitivity with dose enhancement ratios of 1.12 and SF2 of 0.68 (p=0.005). The expression levels of bcl-2 and bax were reduced when combined with AG 1478 and NS 398. Conclusion : Our results indicate that the selective COX-2 inhibitor and EGFR blocker combined with radiation have potential additive or cooperative effects on radiation treatment and may act through various mechanisms including direct inhibition of tumor cell proliferation, suppression of tumor cell cycle progression and inhibition of anti-apoptotic proteins.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.392-398
• /
• 2015

The physicochemical properties of spray-dried rice flour with Lactobacillus plantarum CGKW3 were investigated. Amylose and damaged starch contents of spray-dried rice flour (S10, S20, S30, and S50) with L. plantarum CGKW3 were 14.18~17.75% and 24.65~34.08%, respectively. The particle size of spray-dried rice flour was $82.28{\sim}131.17{\mu}m$. The rice flour with L. plantarum CGKW3 showed a good powder flowability. The water absorption and water solubility of spray-dried rice flour were 1.96~2.13 and 9.91~21.95%, respectively. Thermal properties measured by differential scanning calorimeter revealed that the enthalpy (${\Delta}H$) for starch gelatinization were highest in the rice flour (S50) with L. plantarum CGKW3. When compared, the viable cell number of spray-dried rice flour were found to be in the following order: S10 (5.78 log CFU/g) < S20 (6.38 log CFU/g) < S30 (6.69 log CFU/g) < S50 (7.11 log CFU/g). The survaival rate of L. plantarum CGKW3 was 60.02-73.85%, which reflected the improvement in the quality of rice flour with an increase in treatment concentration. Based on our results, spray-dried rice flour with L. plantarum CGKW3 could be used in various types of rice foods.