• Journal of the Korean Society of Tobacco Science
• /
• v.3 no.2
• /
• pp.77-81
• /
• 1981

A flew spectroscopic method was developed to determine microquantities of nicotine with cyanogen chloride and pyrazolon. Absorption maximum of tile derivative solution appeared at 520nm. The color formed in the proposed method was stable for at least 30 min. at pH 7.5, and followed the Lambert-Beer's law between tile limits of 1 and 5 micrograms of nicotine. The relative errors in burley and flue-cured tobacco leaves were $\pm5%$ in comparison with the Griffith method.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1422-1432
• /
• 2014

Convergent all-electron multi-reference configuration-interaction (MRCI) calculations are performed for a lithium dimer with Kaufmann's Rydberg basis functions. A comparison of the results of these calculations with those of the effective core potential/core polarization potential (ECP/CPP) method and experimental data reveals the deficiency of the all-electron ab initio method. The deficiency is related to the mere 51.9% attainment of electron correlation for the ground state. The percent attainment of electron correlation for the first excited state is slightly better than that for the ground state, preventing us from obtaining better agreements with experimental data by means of increasing the size of basis sets. The Kaufmann basis functions are then used with the ECP/CPP method to obtain the accurate convergent potential energy curves for the $^1\prod_u$ states correlated to Li(2p) + Li(2p) and Li(2s) + Li(n = 2, 3, 4). Quantum defect curves (QDCs) calculated for both the $X^2\sum_g$ and 1 $^2\prod_u$ states of the $Li{_2}^+$ ion and the Lu-Fano plot reveal a strong series-series interaction between the two $2snp{\pi}$ and $2pnp{\pi}$ Rydberg series. The QDCs are then used to resolve assignment problems in the literature. The reassignments, performed by Jedrzejewski-Szemek et al., of the dissociation product of the D $^1\prod$ state from (2s+3d) to (2s+3p) and that of the 6 $^1\prod_u$ from (2s+4d) to (2s+4p) are found to be incorrect. It may be more natural to assign their $2snp{\pi}$ Rydberg series as a $2snd{\pi}$ series. The state, assigned as 5p $^1\prod_u$ by Ross et al. and 4d $^1\prod$ by Jedrzejewski-Szemek et al., is assigned as the 7 $^1\prod_u$ state, correlated to the Li(2s) + Li(4f) limit.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.679-686
• /
• 2005

Because EPON access network shares a medium and aggregates the traffic from EPON subscribers, scheduling media access control on EPON bandwidth allocation is very important. Furthermore DBA mechanism of EPON based on TDMA is out of specification and up to implementation. This paper deals with a DBA method to guarantee the QoS of the delay sensitive traffic on the base of best-effort service and delay priority queue management. The proposed method performs virtual scheduling algorithm for the integrated traffic. It uses the same MAC messages and tries to guarantee the QoS of higher priority traffic first with a simple DBA architecture. We evaluate the algorithm for traffic delay according to polling interval and traffic load of upstream and downstream. The results show that the proposed method can guarantee the QoS of the delay sensitive traffic with priority of the service classes.

• Korean Journal of Microbiology
• /
• v.6 no.2
• /
• pp.63-67
• /
• 1968

Total carbohydrates, amino acids and peptide-like substances in two kinds of Korean lager beers have been analyzed by the calorimetric method of Dreywood's anthrone reagent and Fowden's ninhydrin reagent. The samples were fractionated with column of ion-exchange resin. The experimental results are as follows; 1. Amounts of non-hydrolyzed carbohydrates in the part of column processed is 1. 82% and 1. 96 % (the value was measured by Bertrand's method). But the amounts of those measured by Dreywood's anthrone method are 5.57% and 4.25%, this values are much more than those of Bertrand's method. 2. It can be estimated the amounts of gum and dextrin are 3.75% and 3.30% in both two beers, by comparison of samples with the above mentioned two method. 3. The amounts of carbohydrates by anthrone reagent in acid-hydrolyzed beers are much increased than those of non-hydrolyzed, so it is suggested the presence of polymer carbohydrates which couldn't be detected by Bertrand's method. 4. Total amounts of amino acids are 0.015% and 0.025% (as glycine) in non-hydrolyzed beers measured by ninhydrine color reaction method, on the other hand the amount of amino acids in acid hydrolyzed beers are 0.06% and 0.056%, this is much more than those of nonhydrolysis. The different amounts means that of peptide-like substances. 5. It is necessary to determine the constituent of amino acid for the better taste of beer, and also it is desirable to check the role of carbohydrates in the course of fermentation, mashing and on lager beer for effective utilization of carbohydrate materials to eliminate the losses.

• Structural Engineering and Mechanics
• /
• v.5 no.2
• /
• pp.115-126
• /
• 1997

Importance sampling methods have been developed with the aim of reducing the computational costs inherent in Monte Carlo methods. This study proposes a new algorithm called the adaptive kernel method which combines and modifies some of the concepts from adaptive sampling and the simple kernel method to evaluate the structural reliability of time variant problems. The essence of the resulting algorithm is to select an appropriate starting point from which the importance sampling density can be generated efficiently. Numerical results show that the method is unbiased and substantially increases the efficiency over other methods.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.4
• /
• pp.278-284
• /
• 1993

A simplified TAC method was developed for the selection of design temperature and absolute humidity for peak cooling and heating load calculation with ETD method. And the design data of the 11 major cities in Korea were obtained. Based on the simplified TAC method, the design data for summer and autumn cooling season were selected by the TAC 5.0% of July through August and TAC 5.0% of October, respectively. But the design data for winter heating season were selected by the conventional TAC 2.5% of the full winter season.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.41-50
• /
• 2023

This study reviewed the liquefaction reinforcement and ground reinforcement methods widely used domestically and abroad through construction method characteristics and analyzed the economic feasibility and reinforcement efficiency of each reinforcement method. The analysis results were used to evaluate the applicability of the appropriate reinforcement method for the liquefaction reinforcement of new and existing structures. As a result of evaluating the applicability of the reinforcement method based on the economic feasibility and reinforcement effect of each reinforcement method, the compaction method, which secures the construct ability by applying large equipment, is advantageous when reinforcing a new structure, and the low-fluidity mortar injection method (C.G.S method) and the high-pressure injection method (J.S.P method) are considered appropriate in the existing structure.

• Journal of the Korean Mathematical Society
• /
• v.51 no.6
• /
• pp.1291-1304
• /
• 2014

In 2005 Kadiri proved that the Riemann zeta function ${\zeta}(s)$ does not vanish in the region $$Re(s){\geq}1-\frac{1}{R_0\;{\log}\;{\mid}Im(s){\mid}},\;{\mid}Im(s){\mid}{\geq}2$$ with $R_0=5.69693$. In this paper we will show that $R_0$ can be taken $R_0=5.68371$ using Kadiri's method together with Platt's numerical verification of Riemann Hypothesis.

• Journal of Animal Science and Technology
• /
• v.58 no.10
• /
• pp.36.1-36.5
• /
• 2016

Background: Liquid feeding system has been introduced to domestic swine farms, but negative cognition about liquid feeding system has been remained for feed waste decay related with poor management and microbial contamination. For these reasons, this study was conducted to evaluate the effects of feeding method in lactating sows. Methods: A total of 30 mixed-parity (average 4.13) lactating sows (Yorkshire ${\times}$ Landrace) with an initial BW of $218.8{\pm}19.5kg$ was used in a 3 week trial. Sows were allotted to 1 of 2 treatments in a completely randomized design by their body weight, backfat thickness, parity and alive litter weight. One of treatments was dry feeding and the other was liquid feeding (water to feed ratio, 1:1). Experimental diets contained 3265 kcal ME/kg, 12.6 % CP, 5.76 % EE, 1.09 % total lysine, 0.25 % total methionine, as fed basis. Results: Dry feeding treatment had high body weight loss rather than liquid feeding treatment (P = 0.04). Dry feeding treatment had tendency to increase litter weight at 21d of lactation (P = 0.06) and litter weight gain (P = 0.04) during lactation period (0-3 week). Sows fed dry feeding method made milk containing high content of casein and total solid rather than sows fed liquid feeding method (P = 0.04). In addition, dry feeding treatment had tendency to higher content of milk fat, protein and solid not fat on 21d of lactation (P = 0.07). Sows fed dry feeding type also showed higher milk energy content in milk of 21d lactation (P = 0.05). Furthermore, liquid feeding treatment showed high occurrence in feed waste during lactation period (P <0.01). Conclusion: Dry feeding method was more suitable feeding method to lactating sows under high temperature environment like lactating barn.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.361-368
• /
• 2011

In this study, we present a method for efficiently aggregating networks state information required to determine feasible paths in transport networks that uses the source routing algorithm for hierarchical QoS routing. It is proposed to transform the full mesh topology whose Service Boundary Line serves as its logical link into the star topology. This is an aggregation method that can be used when there are two or more QoS parameters for the link to be aggregated in an asymmetric network, and it improves the information accuracy of the star topology. For this purpose, the Service Boundary Line's 3 attributes, splitting, joining and integrating, are defined in this study, and they are used to present a topology transformation method. The proposed method is similar to space complexity and time complexity of other known techniques. But simulation results showed that aggregated information accuracy and query response accuracy is more highly than that of other known method.