• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.397-406
• /
• 2009

We have fabricated source-drain electrodes for OTFTs using a screen-printing technique with carbon-black pastes as conductive paste. And effects of dispersants contents (SOP 10-40%) on the dispersity of carbon-black pastes and characteristics of screen-printed source-drain electrodes for OTFTs using two types of dispersants (DB-2150, DB-9077) were investigated. As contents of both dispersants were increased the dispersity of carbon-black mill-bases was improved, whereas the carbon-black pastes exhibited different dispersion characteristics. For the case of DB-2150, the dispersity of the pastes was improved with increasing dispersant content and the storage modulus G' in their rheology characteristics were reduced. But, for the DB-9077, the storage modulus G' of pastes were increased with dispersant content due to the flocculated network structure formed by interactions among carbon-black powders and dispersants. But, since this flocculated network structure of the pastes using DB-9077 resulted in the conduction path of carbon-black structures, the conductivities of screen-printed electrodes and mobilities of the OTFTs with them were better than those using pastes with DB-2150.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.807-815
• /
• 2012

In this paper, we propose a scheme for partially dynamic lane control for energy saving in multilane-based high-speed Ethernet. In this scheme, among the given transmission lanes, at least one lane is always operating, and the remaining lanes are dynamically activated to alleviate the network performance in terms of queuing delay and packet loss in the range of acceptance. The number of active lanes is determined by the decision algorithm based on the information regarding traffic and queue status. The reconciliation sublayer adjusts the transmission lane with the updated number of lanes received from the algorithm, which guarantees no processing delay in the media access control layer, no overhead, and minimal delay of the exchanging control frames. The proposed scheme is simulated in terms of queuing delay, packet loss rate, lane changes, and energy saving using an OPNET simulator. Our results indicate that energy savings of around 55% (or, when the offered load is less than 0.25, a significant additional savings of up to 75%) can be obtained with a queuing delay of less than 1 ms, a packet loss of less than $10^{-4}$, and a control packet exchange time of less than $0.5{\mu}s$ in random traffic.

• Journal of the Korea Convergence Society
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2012

In this paper, we developed real-tim video transfer system based on Android environment. After android device with embedded camera capture images, it sends image frames to video server system. And also video server transfer the images from client to peer client. Peer client also implemented on android environment. We can send 16 image frames per second without any loss in 3G mobile network environment.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.60.1-60.1
• /
• 2010

한국우주전파관측망(Korean VLBI Network, KVN)을 이루는 21m 망원경의 수신기에는 전파세기를 모니터링하기 위한 장치가 있으나, 회로잡음, 이득, 그리고 DC offset 등의 개선을 위하여 전파세기 시험용 측정기를 설계하였다. 이 장치는 입력신호의 전압에 대하여 주파수로 출력되는데, 선형성과 신호잡음특성이 중요하다. 이러한 회로 특성 파악과 개선을 위하여, 차동입력 증폭, 단일입력 증폭, 그리고 1:1앰프출력 등으로 입력신호에 대하여 다양한 실험을 할 수 있게 하였고, 샘플링 주파수도 1 MHz와 4 MHz를 선택할 수 있게 전파세기 시험용 측정기를 설계하였다. 시제품을 제작하여 DC 입력 시험, 0 전압입력 시험, 노이즈 제너레이터를 이용한 동작 시험, 그리고 KVN연세전파천문대의 수신기에 직접 연결한 실험을 통하여, 최종 이득안정도의 잡음스펙트럼 ~1.5 X $10^{-4}\;dG/G(Hz^{-1/2})$@1Hz를 얻었다. 이번 실험 결과를 바탕으로 KVN의 전파세기측정기를 새로 제작할 예정이다. 이에 전파세기 시험용 측정기의 설계 결과를 소개하고자 한다.

• Electronics and Telecommunications Trends
• /
• v.33 no.5
• /
• pp.64-75
• /
• 2018

People usually check their social media, e-mail, and online news on their smartphones using their carrier network. During this process, much of the data traffic is offloaded to ubiquitous Wi-Fi networks. Such offloading will continue to increase rapidly because of flourishing public Wi-Fi networks located around the world. In this technical report, we first investigate domestic public Wi-Fi projects, and followed by foreign projects. In addition, we investigate the Wi-Fi technology evolution that has been standardized in IEEE 802. More and more people are tending to use Wi-Fi, not only at home or work, but also on public transport such as buses and trains. Hence, it is important to come up with ideas that can realize Wi-Fi onboard. The key technologies needed here are related to a mobile wireless backhaul between trains and trackside radio equipment, or between buses and roadside units. Thus, we also investigate the mobile wireless backhaul technologies and their trends.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.908-912
• /
• 2008

To achieve a higher succinic acid productivity and evaluate the industrial applicability, this study used Mannheimia succiniciproducens LPK7 (knock-out: ldhA, pflB, pta-ackA), which was recently designed to enhance the productivity of succinic acid and reduce by-product secretion. Anaerobic continuous fermentation of Mannheimia succiniciproducens LPK7 was carried out at different glucose feed concentrations and dilution rates. After extensive fermentation experiments, a succinic acid yield and productivity of 0.38 mol/mol and 1.77 g/l/h, respectively, were achieved with a glucose feed concentration of 18.0 g/l and $0.2\;h^{-1}$ dilution rate. A similar amount of succinic acid production was also produced in batch culture experiments. Therefore, these optimal conditions can be industrially applied for the continuous production of succinic acid. To examine the quantitative balance of the metabolism, a flux distribution analysis was also performed using the metabolic network model of glycolysis and the pentose phosphate pathway.

• Microbiology and Biotechnology Letters
• /
• v.48 no.2
• /
• pp.113-120
• /
• 2020

The objective of the study was to assess the survival of microencapsulated Lactobacillus plantarum ATCC8014 produced using the emulsion technique in alginate gel combined with pectin and maltodextrin components. The microcapsules were then added to cupcake dough that was further baked at 200℃ for 12 min. The viability of L. plantarum was assessed during baking and the 10 days of storage at 4℃ as well as in simulated gastrointestinal conditions. In addition, yeast-mold and water activity were investigated. After baking, the samples with microencapsulated L. plantarum contained more than 5 log CFU/g, which was higher compared to the bacterial concentration of the control samples. The concentration of L. plantarum was more than 6 logs CFU/g after the end of the storage; therefore, the probiotic functioned as a biopreservative in the cake. The prebiotic component strengthened the microcapsules network and helped protect the viability of L. plantarum in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) media. The results show that the addition of L. plantarum microencapsules did not affect the sensory scores of the cupcake while ensuring the viability of the probiotic during baking and storing.

• ETRI Journal
• /
• v.45 no.1
• /
• pp.45-59
• /
• 2023

In this paper, to optimize the average delay and power allocation (PA) for system users, we propose a resource scheduling scheme for wireless networks based on Cyclic Prefix Orthogonal Frequency Division Multiplexing (CP-OFDM) according to the first fifth-generation standards. For delay minimization, we solve a throughput maximization problem that considers CPOFDM systems with carrier aggregation (CA). Regarding PA, we consider an approach that involves maximizing goodput using an effective signal-to-noise ratio. An algorithm for jointly solving delay minimization through computation of required user rates and optimizing the power allocated to users is proposed to compose the resource allocation approach. In wireless network simulations, we consider a scenario with the following capabilities: CA, 256-Quadrature Amplitude Modulation, millimeter waves above 6 GHz, and a radio frame structure with 120 KHz spacing between the subcarriers. The performance of the proposed resource allocation algorithm is evaluated and compared with those of other algorithms from the literature using computational simulations in terms of various Quality of Service parameters, such as the throughput, delay, fairness index, and loss rate.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.491-504
• /
• 2016

Jinwon Au-Ag deposit is located in the Uijin gun which is southeast 300 km from Seoul. The deposit area consists of mainly Precambrian Hongjesa granite, which occurs as porphyroblastic texture, medium grain and composed of quartz, feldspar and mica. This deposit consists of four parallel hydrothermal quartz veins that fill NE oriented fractures in Precambrian Hongjesa granite. The grade of quartz veins contain from 3.0 to 21.4 g/t (average 6.4 g/t) gold and from 5.0 to 252.0 g/t (average 117.9 g/t) silver, respectively. They vary from 0.2 m to 0.6 m (average 0.3 m) in thickness and extend to about 200 m in strike length. Quartz veins occur as massive, network, cavity, breccia, crustiform, comb and zonal textures. Wallrock alteration has silicification, sericitization, pyritization and argillitization. The mineralogy of the quartz veins consists of quartz, arsenopyrite, cassiterite, pyrite, sphalerite, chalcopyrite, galena, electrum, tetrahedrite, canfieldite, argentite, Ag-Sb-S mineral, Mn-Fe-O mineral, Pb-O mineral and Pb-P-Cl-O mineral(chloro-pyromorphite). Chemical compositions of minerals from this deposit are as followed; Fe/Fe+Mg of sericite is from 0.32 to 0.71, As content of arsenopyrite ranges from 27.91 to 30.33 atomic %, FeS content of sphalerite range from 9.77 to 16.76 mole %, Ag content of electrum is from 29.42 to 37.41 atomic % and Ag content of tetrahedrite range from 32.17 to 36.53 wt.%, respectively. Baased on mineralogy and chemical compositions of minerals from Jinwon Au-Ag deposit, deposition of minerals was caused by a change in temperature, oxygen fugacity($fO_2$) and sulfur fugacity($fS_2$) from the near neutral hydrothermal fluid evolved by reaction with wallrock.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.1036-1057
• /
• 2013

Wireless body area network (WBAN) is a promising candidate for future health monitoring system. Nevertheless, the path to mature solutions is still facing a lot of challenges that need to be overcome. Energy efficient scheduling is one of these challenges given the scarcity of available energy of biosensors and the lack of portability. Therefore, researchers from academia, industry and health sectors are working together to realize practical solutions for these challenges. The main difficulty in WBAN is the uncertainty in the state of the monitored system. Intelligent learning approaches such as a Markov Decision Process (MDP) were proposed to tackle this issue. A Markov Decision Process (MDP) is a form of Markov Chain in which the transition matrix depends on the action taken by the decision maker (agent) at each time step. The agent receives a reward, which depends on the action and the state. The goal is to find a function, called a policy, which specifies which action to take in each state, so as to maximize some utility functions (e.g., the mean or expected discounted sum) of the sequence of rewards. A partially Observable Markov Decision Processes (POMDP) is a generalization of Markov decision processes that allows for the incomplete information regarding the state of the system. In this case, the state is not visible to the agent. This has many applications in operations research and artificial intelligence. Due to incomplete knowledge of the system, this uncertainty makes formulating and solving POMDP models mathematically complex and computationally expensive. Limited progress has been made in terms of applying POMPD to real applications. In this paper, we surveyed the existing methods and algorithms for solving POMDP in the general domain and in particular in Wireless body area network (WBAN). In addition, the papers discussed recent real implementation of POMDP on practical problems of WBAN. We believe that this work will provide valuable insights for the newcomers who would like to pursue related research in the domain of WBAN.