• Journal of Engineering Education Research
• /
• v.24 no.5
• /
• pp.46-52
• /
• 2021

This study introduces the development and application of instructional materials for a micro-UAV (unmanned aerial vehicle) design and manufacturing program in university education for freshman/sophomore students. The ADDIE methodology was applied to the development of educational materials, which consist of 15 lessons including the aircraft design theory, 3D CAD modeling, 3D printing production, and UAV flight control. The validity of the program was evaluated with 8 expert panels. A total of 82 participants from engineering and social science grouped the 16 teams for the creative UAV wing design and cooperative interactions. The results of overall program satisfaction survey was measured highly as the average 4.54 (out of 5), so that the students were content with the professional engineering knowledge, 3D digital tools, and the opportunity to design and manufacture airplanes on their own. In conclusion, it can be confirmed that the developed program is effective for UAV education for junior level college student.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.613-625
• /
• 2015

This research was conducted to provide basic data to improve expressivity required for virtual clothing to replace actual clothing. For the experiment, 6 materials were selected and 12(2 kinds of length) actual flared skirts were made. At the same time, simulations were carried out on OptiTex Runway 12.0 for 36(12 kinds of skirts $\times$ KES, FTU, KES weight/10) kinds of virtual flared skirts, which were applied with the measured property values (thickness, weight, bending, shear, friction, and stretch). Also, the study compared and analyzed the wearing images, silhouette overlapping images, and skirt length measurements of the actual and virtual skirts put on a dummy. As a result, the actual skirts showed clear distinction for each material. In contrast, virtual 1 and 2 expressed fabric 3 in the most similar way, but could not recreate the uniform, soft, and natural flare shape of the actual skirts in general. Virtual 3 formed natural flares as those of the actual skirts, and expressed fabric 1, 5, and 6 in a similar way. However, virtual 3 had too much volume and barely showed any distinction for each material. All of virtual 1, 2, and 3 expressed different flare shapes on the front and back sides of the skirt similarly to the actual skirts, and had a good visual expression for the color and texture of the materials. However, they could not effectively express the elasticity and fabric sagging in the bias direction.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.2
• /
• pp.77-88
• /
• 2005

This paper introduces a project for the development of an F-125 machine using 3D PLM systems including 3D CAD, CAM, CAE, PDM, and DMU systems. Here, the F-125 machine is a formula racing car equipped with a 125cc motorcycle engine. A development process and computer-integrated environment was established using 3D PLM systems on the conceptual basis of concurrent and virtual engineering. A DMU model for a full vehicle was built using CATIA V.5 and used to check interference between parts and to simulate assembly process. This DMU-based approach enables to find and fix manufacturing problems in the early design stage. All development activities have been done by the graduate and undergraduate students of the automotive engineering department of Kookmin University. Through the project, the students could acquire knowledge about car development process and 3D PLM systems in automotive industry.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.32-39
• /
• 2011

This study is about the installation of the solar cell modules. The solar cell modules are built by the tree-mimic structure, and the performance is compared with that of the flat-plate type solar cell module installation. The mathematical tree model, which was suggested by Fisher and Honda, is utilized to determine the location of the solar cell modules for the tree-mimic type. The experiment shows that the generated electric power of the flat-plate type is higher than that of the tree-mimic type by 30% for one month of July. This lower performance for the tree-mimic type comes from the shading effects among the solar cell modules. The theoretical calculation for the absorbed solar radiation on the two types of solar cell installation shows that the tree-mimic type is higher than the flat-plate type by 8.5%. The shading area for the tree-mimic model is calculated with time by using the 3D-CAD, which will be utilized for the optimization of the tree-mimic model in the future.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.72-75
• /
• 2020

조립 부품 이미지에 해당하는 3D CAD 모델 매칭 기술은 최근 로봇 조립 기술의 발전으로 필요성이 대두되고 있다. 이미지 기반 3 차원 모델 매칭 연구는 진행되어 왔지만 가구 부품 이미지와는 특성이 다른 RGB[5] 이미지나 스케치 이미지를 다루는[1] 접근들이었다. 딥러닝을 사용하는 스케치 이미지 기반 3 차원 물제 검색 연구에서는 대부분 3 차원 이미지를 다각도에서 렌더링한 view 이미지들에서 feature를 추출하고 pooling 하여 하나의 feature를 출력한다. 그러나 기존의 view pooling 방식은 단순한 평균 방식으로, 부품 이미지에 따른 view를 반영하기에는 한계가 있었다. 따라서 본 논문에서는 조립 부품 이미지 기반 3 차원 물체 검색을 위해 query 부품 이미지에 따라 다른 view 이미지에 집중할 수 있는 방식의 attentional view pooling을 제안한다. 또한 조립 부품 데이터의 특성 상 class 당 CAD 모델이 하나인 상황이므로 학습 데이터가 터무니없이 부족하여 이를 해결하기 위한 학습 데이터 증강 방법을 제안한다. 실험은 의자 부품 11가지에 대해 진행하였고 이를 통해 제안하는 방식의 성능을 입증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.91.1-91
• /
• 2002

1. Introduction Present study presents the basic concept of a Solid Freeform Fabrication System using a rapid prototyping procedure and optimal control for a transferring and accumulating system. And it developed a novel rapid prototyping process that can use ceramic or metal as well as polymer as a basic material. 2. Solid Freeform Fabrication System 2.1 Basic Theory A 3D CAD data of the model is converted to the 2D cross-section data of the slides. A ceramic or metal tape of thickness 0.5-1.5mm is cut by a laser beam with the cross-section data of the slide. A 3D model was obtained by transferring and accumulating the slides. The final product is manufactured by sin...

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.58-65
• /
• 1993

The Ku-band GaAs MESFET mixer is designed and implemented using the LINMIC+, the microwave CAD simulator. The RF and IF is 14.0GHz and 1.0GHz, respectively. P$_{LO}$ is 0dBm, it can be obtained 5.8dB of the minimum noise figure at 1.4GHz and 5.8dB of the maximum conversion gain at 1.45GHz. Effects of bias and power level of local oscillator frequency are observed and the characteristics are verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4713-4718
• /
• 2013

Nowadays, three-dimensional computer added design(3D CAD) tool are widely and actively used for design of mechanical machine. Because using the tool is more effective to understand design concept and to collaborate with other operation than using two-dimensional design tool. In this study, the 3D CAD tool which is called I-DEAS was applied for three-dimensional modeling of main parts and assembling of modeled parts for identification the entire shape of a injection molding machine. In addition, a study was also performed regarding reduction for the weight of main plates for saving production cost and energy in the machine. A finite element method(FEM) program in I-DEAS tool was used for the improvement study. First, the current main plates were structural analysed and then the plate deformations, weak regions and stress distributions were graped. By the FEM results, the 2nd improved designing of the plates was conducted such as reinforcement or slimming of the plate wall thickness. The 2nd structural FEM was performed for verification of the redesigned plates and then the FEM results were compared with the 1st FEM's result. The weight of the main plates were averagely reduced approximately 3 - 7%. By these results, it was seemed that the improved plates have a useful availability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.441-450
• /
• 2011

Recent construction projects consist of large and complex facilities, which project management information system (PMIS) is used for managing construction cost and schedule. The ministry of land, transport and maritime affairs (MLTM) is using a continuous acquisition and life-cycle support (CALS) system for managing the public construction projects. This study attempts to survey some problems of the CALS system in practical application, and then suggests the new functions to improve practical application of the CALS system. All functions in each menu were analyzed in the practical application aspect. All projects ordered from MLTM should use the CALS system as a PMIS, but the practical application is limited in partial functions and special working group. And the utilization of system is focused on simple tasks and report process. One of main reason is that the system is using numerical data rather than graphical data. This study suggests new functions and a visualized management method that can improve the practical applicability using a 4D object in each current functions.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.603-606
• /
• 1991

The crystal structure of Probenecid has been determined from 2574 independent reflections collected on an automatic ENRAF-NONIUS CAD-4 diffractometer using graphite-monochromated $Mo-K{\alpa}$ radiation. The crystal is triclinic, space group P$\bar{1}$ with unit cell dimensions a = 7.535(2)${\AA}$, b = 18.473 (5)${\AA}$, c = 5.317(9)${\AA}$, ${\alpha} = 92.00(5)^{\circ}$, ${\beta} = 99.02(5)^{\circ}$, ${\gamma} = 94.89(2)^{\circ}$, V = 727.4(2)${\AA}^3$, Z = 2, $D_m$ = 1.310, $D_x$ = $1.302 gcm^{-3}$, ${\mu}$ = $1.88 cm^{-1}$, F(000) = 304, and T = 298 K. Final R = 0.0676 and $R_w$ = O.0630 for 1209 reflections > 5${\sigma}(F_o)$. In the spacial arrangement about N(13), the sum of bond angles about nitrogen is 350.9° and the nitrogen lies only 0.268(6)${\AA}$ out of S(1)-C(14)-C(17) plane. The S(1)-C(4) distance is 1.792(6)${\AA}$ and the C(4)-S(1)-N(13) angle is $106.5(3)^{\circ}$. The overall conformation of the molecule is folded with respect to sulfur.