• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.73-78
• /
• 2018

The main objective of this study was to evaluate the effects of acetate on the cultivation of anabena under mixotrophic condition. Four different types of acetates were used for the anebena cultivation. Among them, ethyl acetate was found to be the most effective and the growth rates linearly increased as the amount of ethyl acetate increased. When 40 mM of ethyl acetate was used, the highest values of specific growth rate of $0.979day^{-1}$ and maximum biomass productivity of $0.293g\;L^{-1}\;d^{-1}$ were obtained. On the contrary, input of acetic acid and butyl acetate inhibited the growth of anabena. For aeration tests, 0.54 vvm was optimum for anabena cultivation. For a semi-continuous cultivation test, ethyl acetate was used after 0.54 vvm test was finished. Then, test continued under 0.54 vvm and 40 mM of ethyl acetate. Lower specific growth rate and maximum biomass productivity were obtained compared to those from batch cultivation tests. However, the greatest maximum concentration of 5.91 g/L was obtained during the semi-continuous cultivation test.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.99-104
• /
• 2010

Platinum nanoparticles were added to a mixture of HEMA (2-hydroxyethyl methacrylate), NVP (N-vinyl pyrrolidone) and MMA (methyl methacrylate) in a mould at various concentrations. The resulting mixture was copolymerized by heating at $70^{\circ}C$ for 40 min, $80^{\circ}C$ for 40 min, and $100^{\circ}C$ for 40 min, respectively. The physical properties of contact lens were then measured. The oxygen transmissibility of $9{\sim}15{\times}10^{-9}$ cm/s mL $O_2$/mL ${\times}$ mmHg, water content of 34.22~35.52%, refractive index of 1.432~1.435, visible transmittance of 88.3~91.2% and tensile strength of 0.141~0.152 kgf were obtained. The addition of platinum nanoparticles to the polymer allowed the contact lens to have various colors without artificial coloring agents. The polymer materials satisfied the physical properties required to produce contact lenses, making the material suitable to be applied as a functional material for ophthalmological purposes.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.222-227
• /
• 2010

This study added Au colloid in martial of conventional contact lens in various concentrations and copolymerized by heating at $70^{\circ}C$ for 40 minutes, $80^{\circ}C$ for 40 minutes, and finally, $100^{\circ}C$ for 40 minutes. Using the polymer produced through the copolymerization process, we have produced a contact lens and measured the physical characteristics which showed oxygen transmissibility of $9{\sim}12{\times}10^{-9}$ cm/s mL $O_2$/mL ${\times}$ mmHg, water content of 27.84% ~ 32.17%, refractive index of 1.432 ~ 1.443, visible transmittance of 83.2% ~ 89.5% and tensile strength of 0.141 kgf ~ 0.152 kgf. The polymer satisfied the physical properties required to produce contact lenses. Also, we judged that the polymer is suitable to be applied as a functional material for ophthalmological purposes.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.54.1-54.10
• /
• 2021

Objectives: The purpose of this study was to quantify phase transformation after hydrofluoric acid (HF) etching at various concentrations on the surface of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP), and to evaluate changes in bonding strength before and after thermal cycling. Materials and Methods: A group whose Y-TZP surface was treated with tribochemical silica abrasion (TS) was used as the control. Y-TZP specimens from each experimental group were etched with 5%, 10%, 20%, and 40% HF solutions at room temperature for 10 minutes. First, to quantify the phase transformation, Y-TZP specimens (n = 5) treated with TS, 5%, 10%, 20% and 40% HF solutions were subjected to X-ray diffraction. Second, to evaluate the change in bond strength before and after thermal cycling, zirconia primer and MDP-containing resin cement were sequentially applied to the Y-TZP specimen. After 5,000 thermal cycles for half of the Y-TZP specimens, shear bond strength was measured for all experimental groups (n = 10). Results: The monoclinic phase content in the 40% HF-treated group was higher than that of the 5%, 10%, and 20% HF-treated groups, but lower than that of TS-treated group (p < 0.05). The 40% HF-treated group showed significantly higher bonding strength than the TS, 5%, and 10% HF-treated groups, even after thermal cycling (p < 0.05). Conclusions: Through this experiment, the group treated with SiO₂ containing air-borne abrasion on the Y-TZP surface showed higher phase transformation and higher reduction in bonding strength after thermal cycling compared to the group treated with high concentration HF.

• Molecules and Cells
• /
• v.40 no.2
• /
• pp.143-150
• /
• 2017

Homologous recombination (HR) is necessary for maintenance of genomic integrity and prevention of various mutations in tumor suppressor genes and proto-oncogenes. Rad51 and Rad54 are key HR factors that cope with replication stress and DNA breaks in eukaryotes. Rad51 binds to single-stranded DNA (ssDNA) to form the presynaptic filament that promotes a homology search and DNA strand exchange, and Rad54 stimulates the strand-pairing function of Rad51. Here, we studied the molecular dynamics of Rad51 and Rad54 during the cell cycle of HeLa cells. These cells constitutively express Rad51 and Rad54 throughout the entire cell cycle, and the formation of foci immediately increased in response to various types of DNA damage and replication stress, except for caffeine, which suppressed the Rad51-dependent HR pathway. Depletion of Rad51 caused severe defects in response to postreplicative stress. Accordingly, HeLa cells were arrested at the G2-M transition although a small amount of Rad51 was steadily maintained in HeLa cells. Our results suggest that cell cycle progression and proliferation of HeLa cells can be tightly controlled by the abundance of HR proteins, which are essential for the rapid response to postreplicative stress and DNA damage stress.

• The Journal of the Korean dental association
• /
• v.40 no.1 s.392
• /
• pp.54-62
• /
• 2002

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.310-316
• /
• 2010

Nanoparticle with antimicrobial property has been applied to various fields. This study added silver/platinum nanoparticles to HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone) and MMA (methylmethacrylate) in various concentrations and copolymerized by heating at $70^{\circ}C$ for 40 minutes, $80^{\circ}C$ for 40 minutes, and finally, $100^{\circ}C$ for 40 minutes. The particle size of used nano silver and platinum was 10 ~ 20 nm respectively. Using the polymer produced through the copolymerization process, the authors have produced a contact lens and measured the physical characteristics which showed water content of 34.29 ~ 39.00%, refractive index of 1.422 ~ 1.430, visible transmittance of 78.8 ~ 92.5% and tensile strength of 0.149 ~ 0.179 kgf. The ophthalmic lens material produced using silver/platinum nanoparticles satisfied the basic physical properties required for contact lens application.

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.460-464
• /
• 2010

We manufactured functional contact lens materials using 2-hydroxy-4-methoxy-benzophenone, titanium(VI) isopropoxide and nanogold, nanoplatinum with UV-blocking and antimicrobial effects. Contact lens was manufactured by cast mould method. The resulting mixture was copolymerized by heating at $70^{\circ}C$ for about 40 min, at $80^{\circ}C$ for about 40 min, and finally at $100^{\circ}C$ for about 40 min. The refractive index of 1.434 ~ 1.436, water content of 35.24 ~ 36.32%, and visible transmittance of 88.3 ~ 90.8% were obtained for the contact lens materials. The polymer materials satisfied the physical properties required to make the material suitable to be applied as a functional material for ophthalmological purposes.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.228-233
• /
• 2010

Recently, nanoparticles of gold and silver has been applied to various fields due to antimicrobial property. This study added Ag and Au nanoparticles in HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone) and MMA (methylmethacrylate) and copolymerized the solution by heating at $70^{\circ}C$ for 40 minutes, $80^{\circ}C$ for 40 minutes, and finally, $100^{\circ}C$ for 40 minutes. Using the polymer produced through the copolymerization process, and measured the physical characteristics which showed water content of 28.43% ~ 35.27%, refractive index of 1.429 ~ 1.440, visible transmittance of 79.2% ~ 86.5% and tensile strength of 0.125 kgf ~ 0.201 kgf. We judged that we made the copolymer with antimicrobial and physical properties which is suitable for conventional contact lens.

• The Journal of Korean Medicine
• /
• v.27 no.3 s.67
• /
• pp.227-240
• /
• 2006

Objective: To know the recurrence rate of paranasal sinusitis in adults using follow-up investigations. Method: Data was collected from 37 patients who were treated in the Department of Ophthalmology & Otolaryngology & Dermatology, Kangnam Oriental Medical Hospital from 2001-10-01 to 2005-05-31 for chronic paranasal sinusitis in adults over 21 years of age. Results & conclusions: 1. The males made up 51.4% and females made up 48.6%. The recurrence rate was 78.4%. 2. By residence, 78.4% lived in apartments; 21.6% lived in houses. 3. Of the main symptoms, nasal obstruction was the most common. 4. The duration of the disease was within 1 month to 40 years; the group with difficulties within the last 5 years made up the largest group. 5. The patients who had chronic nasal family histories made up 40.5%; Patients who didn't have chronic nasal family histories made up 59.5%. 6. In regards to the period of Tx distribution. the group treated within 4 weeks made up the largest group at 54.1%. 7. As far as methods of Tx distribution, the group of patients treated with herbal medicine and acupuncture were larger (62.2%) than the group treated with only herbal medicine (37.8%). 8. The most common nasal condition symptom in patient histories was chronic rhinitis. 9. The most frequent areas affected by paranasal sinusitis on PNS images were the lateral maxillary sinus, the unilateral maxillary sinus and the ethmoidal sinus. 10. The number of patients who drank little was larger (75.7%) than the number of drinking patients(24.3%); There were more non-smoking patients (78.4%) than smoking patients(16.2%). 11. The patients who slept for 6-7 hours made up the larger group (40.5%). 12. The number of patients who preferred warm water was larger making up 54.1 %; the number of patients that preferred cool water made up 21.6%. 13. The patients who had a common cold 3-5 times a year was the largest group at 54.1%.