• 제목/요약/키워드: 510(k)

검색결과 1,196건 처리시간 0.024초

Conformation of Single Stranded Poly(dA) and Its Interaction with 4',6-Diamidino-2-phenylindole

  • 정갑선;김명순;이길준;조태섭;Kim, Seog K.;이세윤
    • Bulletin of the Korean Chemical Society
    • /
    • 제18권5호
    • /
    • pp.510-514
    • /
    • 1997
  • We studied the interaction of 4',6-diamidino-2-phenylindole (DAPI) with single stranded poly(dA) using optical spectroscopic methods, including absorption, circular dichroism (CD), and fluorescence spectroscopy. The temperature-dependent conformation of poly(dA) was also investigated. The conformation of poly(dA) varied with temperature, which is explained by the stacking-destacking process of the adenine bases, resulting from the sugar conformation. The hypochromicity and red-shift in the absorption spectroscopy, the lack of CD change in the drag absorption region, and the fluorescence behavior, especially a great accessibility of the I2 quencher to the poly(dA)-bound DAPI, suggest that DAPI binds to the outside of poly(dA). The Job plot for the DAPI-poly(dA) mixture demonstrated that a stoichiometry of one DAPI molecule binds to the one phosphate of poly(dA).

3상 직렬공진형 고전압 커패시터 충전기의 해석 및 설계 (Analysis and Design of a 3-phase Series-Resonant type High Voltage Capacitor Charger)

  • 이병하;박상은;차한주
    • 전기학회논문지
    • /
    • 제62권4호
    • /
    • pp.510-516
    • /
    • 2013
  • This paper suggests a 3-phase series-resonant type high voltage capacitor charger for an EML pulsed power system. The operating principle on the charger is explained by an equivalent circuit. Additionally, we analyze the charging characteristic in one discontinuous conduction mode and three continuous conduction modes. The analysis shows that the resonant current per phase is two thirds of the 3-phase charger's average charging current and one third of the single-phase charger's average charging current with the same capacity. We suggest a design method of the 3-phase capacitor charger in each operational mode and present an example of 3.5 kW capacitor charger at ${\omega}_s=0.33{\omega}_r$. The 3.5 kW 3-phase capacitor charger prototype is assembled with a TI28335 controller and a 40 kJ, 7 kV capacitor. The design rules based on the analysis are verified by experiment.

충격신관 K510용 Zr-Ni계 지연관의 저장수명 예측 (Storage Lifetime Prediction of Zr-Ni Delay System in Fuze K510 for High Explosive Shell)

  • 박병찬;장일호;백승준;손영갑;정은진;황택성
    • 한국군사과학기술학회지
    • /
    • 제12권6호
    • /
    • pp.719-726
    • /
    • 2009
  • A delay system in fuze for high explosive shell is an important safety device, but failure in the delay system usually causes failure of the shell. Root-cause analysis of failure in the delay system is required since failure in over 10-years stored delay system recently occurs. In this paper, failure in the delay system was reproduced experimentally to examine aged characteristics of the delay system, and the failed delay system shows the same characteristics as ones of failed delay systems in field. Based on the reproduced experiments, accelerated life testings and the data analysis of failure times of delay systems were performed to predict the storage lifetime.

디스플레이 시스템을 위한 소면적 12-bit 300MSPS CMOS D/A 변환기의 설계 (Design of a Small Area 12-bit 300MSPS CMOS D/A Converter for Display Systems)

  • 신승철;문준호;송민규
    • 대한전자공학회논문지SD
    • /
    • 제46권4호
    • /
    • pp.1-9
    • /
    • 2009
  • 본 논문에서는 디스플레이 시스템을 위한 소면적 12-bit 300MSPS의 D/A 변화기(DAC)를 제안한다. 최근 SoC(System-On-Chip) 경향에 맞는 소면적 DAC를 구현하기 위한 전체적인 구조는 6-MSB(Most Significant Bit) + 6-LSB(Least Significant Bit)의 full matrix 구조로 설계 하였다. 고해상도 동작에 요구되는 output impedance을 만족하는 monitoring bias 구조, 고속 동작 및 소면적 디지털 회로 구성을 위하여 logic과 latch 및 deglitching 역할을 동시에 할 수 있는 self-clocked switching logic을 각각 제안하였다. 설계된 DAC는 Samsung $0.13{\mu}m$ thick gate 1-poly 6-metal N-well CMOS 공정으로 제작되었다. 제작된 DAC의 측정결과 INL (Integrated Non Linearity) / DNL (Differential Non Linearity)은 ${\pm}3LSB$ / ${\pm}1LSB$ 이하로 나타났으며, 300MHz 샘플링 속도와 15MHz의 출력신호에서 SFDR은 약 70dB로 측정되었다. DAC의 유효면적은 $0.26mm^2$ ($510{\mu}m{\times}510{\mu}m$)로 기존의 DAC에 비하여 최대 40% 감소된 초소면적으로 구현되었으며, 최대 전력 소모는 100mW로 측정되었다.

턱관절에 발생한 감염에 대한 치험례 (Infection of the temporomandibular joint: a report of three cases)

  • 김형모;김태완;황주홍;이동주;박나래;송승일
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제37권6호
    • /
    • pp.510-514
    • /
    • 2011
  • An intracapsular and pericapsular infection of the temporomandibular joint (TMJ) is rare. The invasion of bacteria into the joint space can occur through several routes. Among them, hematogenous spread is most common. This report describes three cases of abscess formation in the TMJ (intracapsular and pericapsular infection). The patients were treated with supportive care and surgical intervention (incision and drainage) under hospitalization, and their symptoms had improved. Pain of the TMJ is a typical symptom of temporomandibular joint disorders (TMD). On the other hand, an infection of the TMJ can also cause pain on the affected side, and can be misdiagnosed as routine TMD. Therefore, the possibility of an infection of the TMJ cavity should be considered when treating TMD.

저온작동 조건에서 자동차용 써모사이폰의 성능특성에 관한 연구 (Study on the Performance Characteristics of the Thermosyphon Used for the Vehicle Operated at Low Temperature Conditions)

  • 임택규;이호성;원종필;조중원;이무연
    • 한국산학기술학회논문지
    • /
    • 제13권2호
    • /
    • pp.510-515
    • /
    • 2012
  • 본 연구의 목적은 심지구조 유무에 따른 자동차에 적용된 써모사이폰의 저온 작동영역에서의 성능 특성을 고찰하는 것이다. 이를 위하여 작동유체로 물을 사용하는 써모사이폰을 제작하였고, 작동유체의 충진량, 심지 적용 유무, 외기온도 변화 그리고 증발부에 열부량 변화에 따른 성능 특성을 파악하였다, 결과적으로 작동유체의 충진량 40%에서 최적의 열전달 성능을 나타내고, 외기온도 증가에 따라 써모사이폰의 열전달 성능이 증가하였다.

원전낙뢰보호 및 접지계통에 대한 규제기술연구 (A Study on the Regulatory Technology for Lightning Protection and Grounding System in Nuclear Power Plants)

  • 이재도;주운표;이상근;김대식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.66-68
    • /
    • 2007
  • The regulatory guide, RG-1.204 and its underlying or confirmatory research, NUREG/CR-6866 were studied for Korean application to LPGS of NPPs. However they excluded the application to that of NPPs. So US-NRC approved selectively industrial standards to that of NPPs on Nov 2005. It is necessary to understand the basis of regulatory technology related regulatory positions on LPGS and important to implement the guidance on LPGS as a resonable standard. The paper is examined what and how state of the art of relevant technology applied to the LPGS as well as the trip-out events related to electrical system were involved with LPGS. We reviewed the relevant standards applicable to Korean NPPs. Following are concluded to recommend. (1) IEEE 510-1050 is recommended as a guide for I&C grounding against EMI and lighting transients (2) IEEE Std-665, 510-666, Std-C62.23 for electrical grounding against voltage surges and lighting transients (3) Inspection should be thoroughly be implemented a frequency of 3-5 year period according to NFPA780 or KSC-IEC 61024.

  • PDF

K and Cs Doped Ag/Al2O3 Catalyst for Selective Catalytic Reduction of NOx by Methane

  • Rao, Komateedi N.;Yu, Chang-Yong;Lack, Choi-Hee;Ha, Heon-Phil
    • 한국분말재료학회지
    • /
    • 제18권6호
    • /
    • pp.510-516
    • /
    • 2011
  • In the present study, potassium and caesium doped Ag/$Al_2O_3$ catalysts were synthesized by simple wet impregnation method and evaluated for selective catalytic reduction (SCR) of NOx using methane. TEM analysis and diffraction patterns demonstrated the finely dispersed Ag particles. BET surface measurements reveal that the prepared materials have moderate to high surface area and the metal amount found from ICP analysis was well matching with the theoretical loadings. The synthesized K-Ag/$Al_2O_3$ and Cs-Ag/$Al_2O_3$ catalysts exhibited a promotional effect on deNOx activity in the presence of $SO_2$ and $H_2O$. The long-term isothermal studies at $550^{\circ}C$ under oxygen rich condition showed the superior catalytic properties of the both alkali promoted samples. The crucial catalytic properties of materials are attributed to NO adsorption properties detected by the NO TPD.

전방 장애물 감지 및 알림 신발 설계에 관한 연구 (A Study on Design of Abstacle Ahead Sensing and Inform Shoes)

  • 김경민;소대현;서보람;임은빈;박장우
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2015년도 추계학술발표대회
    • /
    • pp.510-512
    • /
    • 2015
  • 최근 IT 기술의 발전으로 가장 보편화 되고 있는 첨단기기는 스마트폰이다. 길을 걸으며 스마트폰을 사용하는 사람들이 늘어나고 이러한 행위는 보행자 자신의 안전에도 크게 위협적인 요소가 될 수도 있지만 자칫 주변 사람들에게까지 돌이킬 수 없는 결과를 초래할 수도 있다. 본 논문에서는 사람들의 안전한 생활을 위한 지능형 신발을 설계한다. 설계한 신발은 사람들에게 편리하고 유용한 장애물 감지 및 알림 시스템을 설계하기 위해 초음파 센서와 진동 센서 그리고 LED를 이용한다. 또한 모바일 어플리케이션(Mobile application)을 개발하여 활용도를 높인다. 초음파 센서는 마이크로 프로세서에서 장애물과의 거리를 계산한다. 진동 센서는 초음파 센서에서 계산한 거리가 특정거리(IM-4M) 이내이면 신호를 받아 진동 센서 혹은 LED가 동작해 사람에게 장애물이 있다고 알려준다. 모바일 어플리케이션(Mobile application)은 신발이 스마트폰과 일정거리 이상 멀어져 블루투스(Bluetooth)가 끊기면 알림을 해줌으로써 분실 방지를 해주고. 신발의 각 기능들을 제어하도록 해준다. 또 장애물과의 거리가 얼마나 남았는지를 확인할 수 있는 기능도 있다. 따라서 본 논문에서 제안하는 장애물 감지 및 알림 기능은 사람들에게 안전을 보장해주고 저비용으로 구현 가능한 장점이 있다.

Orthograde MTA 충전의 실패 (Failure of orthograde MTA filling: MTA wash-out?)

  • 김유란;이찬영;김의성;정일영
    • Restorative Dentistry and Endodontics
    • /
    • 제36권6호
    • /
    • pp.510-514
    • /
    • 2011
  • Mineral trioxide aggregate (MTA)는 치근 천공을 수복하기 위한 생체적합성이 우수한 재료로 소개되었으며 현재 근관 치료의 다양한 분야에서 사용되고 있다. MTA는 전통적인 수복재료와는 달리 수분이 있는 환경에서 경화되는 특징이 있다. 임상에서 흔치는 않지만 경화되지 않은 MTA가 관찰되는 경우가 있으나 이의 원인은 불명확하며 관련된 연구도 많지 않다. 본 증례는 정 방향 MTA 충전 6년 후 MTA가 소실(wash-out)된 환자에 대한 증례로서 그 원인에 대해 고찰해보고자 한다.