• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.509-510
• /
• 2011

한국전력공사 배전선로의 가공설비(특고압)는 2011.03 현재 약 615,089 km가 설치 운전 중에 있으며 해마다 가공전선 단선 고장이 일어나고 있어, 원인 규명 및 방지대책을 강구하고 있다. 본 연구에서는 가공전선 단선사고의 일반적인 사례 LP 애자 설치개소가 아닌 선로 중간에서 단선 고장난 사고사례에 관한 것으로써 전선피복(절연체)의 두께와 impulse voltage에 따른 Pinhole 형성 그리고 단선 메커니즘에 대해서 기술하였다.

• Current Photovoltaic Research
• /
• v.5 no.2
• /
• pp.43-46
• /
• 2017

Large absorption band shift has been observed for the azo-dye (disperse red-13, DR-13) attached on the surface of silica spheres. Urethane linkage has been utilized to form covalent bond between azo-dye (-OH) and 3-isocyanatopropyltriethoxysilane (ICPTES, -N=C=O). The synthesized ICPTES-DR-13 (ICPDR) molecules were attached to the silica spheres by the hydrolysis and condensation reaction. Although the absorption peak of DR-13 in methanol is at 510 nm, the absorption peak of the ICPDR-silica spheres shifts to 788 nm. The large absorption peak shift is due to the formation of intramolecular charge-transfer band with large aggregated ICPDR.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.792-794
• /
• 1998

The TPD and the $Alq_3$ film are widely used as a hole transport layer and an emitter layer respectively, in organic electroluminescent(EL) device (ITO Glass/TPD/$Alq_3$/metal). In this structure, we fabricated two models. Model(1) having ITO glass/$Alq_3$/Al structure and model(2) having ITO Glass/TPD/$Alq_3$/Al structure were fabricated by the vacuum evaporation. The comparison between model(1) and model(2) was made about the absorbance, the wave length, the current-voltage characteristic and the ln I - $V^{(1/2)}$characteristic respectively. Electroluminescence of green and wavelength of 510[nm] were observed in both model. We observed absorbance from 320[nm] to 430[nm] in $Alq_3$ material and from 250[nm] to 400[nm] in TPD material.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.510-512
• /
• 2007

이기종의 다양한 컴퓨터 시스템과 네트워크 장비 그리고 소프트웨어가 서로 혼재되어 있는 오늘날의 IT 환경을 효과적으로 관리하기 어려워짐에 따라 기업은 막대한 총 소유비용을 지출하고 있다. 이러한 상황을 효과적으로 대처하기 위하여, 분산 이기종 환경에서 플랫폼 독립적인 동시에 기술 중립적인 방법으로 시스템 자원을 감시, 통제, 조정하기 위한 표준 기술이 DMTF 를 중심으로 활발하게 개발되고 있다. 본 논문에서는 소형 단말기를 포함한 수많은 정보기기가 모두 네트워크로 연결되는 유비쿼터스 환경에서의 표준화된 시스템 관리를 가능케 하는 경량 CIM 서버가 가져야 할 요구사항을 도출하기 위해 현재 가장 대표적인 CIM 서버 솔루션을 중심으로 그 특징을 분석한다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.509-510
• /
• 2008

Hybrid Imprint Lithography (HIL) is proposed where photolithography and imprinting processes are employed. Fabrication step of multilevel or three dimensional patterns is suggested. The method of controlling residual layer thickness after imprinting is developed. The thickness of residual layer changes lineally with imprinting time and can be controlled. Polymer patterns fabricated by this HIL is demonstrated.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.506-510
• /
• 2003

In this paper, a meander-line chip antenna with stacked layer is suggested, designed and fabricated employing the LTCC(Low Temperature Co-fired Ceramic) fabrication techniques. To reduce the antenna chip size, the meander-line antenna strip is distributed over three layer. Layers one interconnected using via holes. A 2.4 GHz chip antenna with size of $3.75{\times}7.9{\times}1.0 mm^3$ is designed and fabricated using the LTCC technique. Measurements of the fabricated antenna show 160 MHz bandwidth and 3.75 dBi maximum gain. The Measured reflection coefficient and radiation patterns agree well with the prediction by electromagnetic simulation.

• Journal of Information Processing Systems
• /
• v.9 no.3
• /
• pp.499-510
• /
• 2013

Hardware-Software co-simulation of a multiple image encryption technique shall be described in this paper. Our proposed multiple image encryption technique is based on the Latin Square Image Cipher (LSIC). First, a carrier image that is based on the Latin Square is generated by using 256-bits of length key. The XOR operation is applied between an input image and the Latin Square Image to generate an encrypted image. Then, the XOR operation is applied between the encrypted image and the second input image to encrypt the second image. This process is continues until the nth input image is encrypted. We achieved hardware co-simulation of the proposed multiple image encryption technique by using the Xilinx System Generator (XSG). This encryption technique is modeled using Simulink and XSG Block set and synthesized onto Virtex 2 pro FPGA device. We validated our proposed technique by using the hardware software co-simulation method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.509-510
• /
• 2006

Simulation of micro electrical discharge machining (micro-EDM) process using finite element analysis is proposed. Multiphysics model which has three steps; heat transfer analysis, structural analysis and electric field analysis is developed for simulation. Machined surface for successive five discharges is simulated using developed multiphysics model. Machined surface roughness was simulated under two discharge conditions and the simulated results are compared with actual machined surfaces. From the comparison it is demonstrated that the model can accurately predict the machined surface with the error less than $0.5{\mu}m$.

• Journal of The Korean Association For Science Education
• /
• v.20 no.4
• /
• pp.510-518
• /
• 2000

The purpose of this study was to develop learning materials for the discussion and examine the effects of the discussion learning over the students' conceptual change on force and motion. The subjects consisted of 360 middle school students, comprising of 5 discussion groups of 185 students and 5 traditional learning groups of 175 students. The results indicated that students in the discussion groups showed higher achievement than those in the traditional learning groups. Therefore this study supported the importance of discussion in conceptual change. However further research should be conducted to examine other educational effects of discussion.

• Macromolecular Research
• /
• v.11 no.2
• /
• pp.92-97
• /
• 2003

Model compounds and polymers having N-substituted 1,2-diphenylmaleimide moieties were synthesized and characterized by NMR, IR, UV, and fluorescence spectroscopy. The fluorescence intensity could be controlled by N-substituents of model compounds and polymers. As the structure of an N-substituent of them was bulkier, or the electron density of an N-substituent was denser, the photoluminescence intensity was increased. All the compounds showed greenish yellow photoluminescence with the maximum intensity between 510 and 537 nm. From quantum efficiency data of the model compounds and the polymers, the fluorescence intensity of the polymer 11 was higher than that of the model compound 4.