• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.673-682
• /
• 2023

In this paper, a three-key triple data encryption algorithm (TDEA) of a digital cryptosystem based on phase-shifting interferometry is proposed. The encryption for plaintext and the decryption for the ciphertext of a complex digital hologram are performed by three independent keys called a wavelength key k₁(λ), a reference distance key k₂(d_r) and a holographic encryption key k₃(x, y), which are represented in the reference beam path of phase-shifting interferometry. The results of numerical simulations show that the minimum wavelength spacing between the neighboring independent wavelength keys is about δλ = 0.007 nm, and the minimum distance between the neighboring reference distance keys is about δd_r = 50 nm. For the proposed three-key TDEA, choosing the deviation of the key k₁(λ) as δλ = 0.4 nm and the deviation of the key k₂(d_r) as δd_r = 500 nm allows the number of independent keys k₁(λ) and k₂(d_r) to be calculated as N(k₁) = 80 for a range of 1,530-1,562 nm and N(d_r) = 20,000 for a range of 35-45 mm, respectively. The proposed method provides the feasibility of independent keys with many degrees of freedom, and then these flexible independent keys can provide the cryptosystem with very high security.

• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.215-222
• /
• 1987

${\alpha}$-Ferric Hydrous Oxide and ${\alpha}$-Ferric Oxide were obtained as following processes that Ferric Nitrate solution was adjusted to pH 6-8 with Ammonium Hydroxide, refluxed the Iron precipitate for 1 hr. at 80$^{\circ}C$, washed it with water and Methanol (95%), dried it to obtain ${\alpha}$-Ferric Hydrous Oxide at 60$^{\circ}C$, and then heated in atmosphere to prepare ${\alpha}$-Ferric Oxide for 1 hr. at 450$^{\circ}C$. Mica particles cleaned with ultrasonicator (45KHz) in water were mixed with Ferric Nitrate solution and treated it to adsorb ${\alpha}$-Ferric Oxide on the surface of mica particles by using the abovementioned processes, but the heated temperature was at 500$^{\circ}C$. The maximum wavelength of reflected light on the surface of mica-${\alpha}$-Ferric Oxide (50%) was appeared at 546nm but -Ferric Oxide free mica only was at 436 nm. The maximum wavelength was shifted to longer when the weight ratios of ${\alpha}$-Ferric Oxide to mica was changed from 1% to 50%.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.1
• /
• pp.9-11
• /
• 2013

The AZO/Ag/AZO multilayer films were deposited on polyethersulfone (PES) substrate by using facing target sputtering methods at room temperature. The AZO/Ag/AZO multilayer films with polymer substrate had advantages, such as low sheet resistance, high optical transmittance in visible range and stable mechanical properties. From the results, the AZO/Ag/AZO multilayer films (50/12/50 nm) demonstrated a sheet resistance of 11 ${\Omega}/{\square}$ and average transmittance of 87% in visible range (wavelength of 380-770 nm). Moreover, the multilayer showed stable mechanical properties compared to the single-layered AZO sample during the bending test due to the existence of the ductile Ag metal layer.

• Journal of the Korean Ceramic Society
• /
• v.50 no.3
• /
• pp.212-217
• /
• 2013

Ultra hard TiN coatings were fabricated by DC and ICP (inductively coupled plasma) magnetron sputtering techniques. The effects of ICP power, ranging from 0 to 300 W, on the coating microstructure, crystallographic, and mechanical properties were systematically investigated with FE-SEM, AFM, HR-XRD and nanoindentation. The results show that ICP power has a significant influence on the coating microstructure and mechanical properties of TiN coatings. With an increasing ICP power, the film microstructure evolves from an apparent columnar structure to a highly dense one. Grain sizes of TiN coatings decreased from 12.6 nm to 8.7 nm with an increase of the ICP power. A maximum nanohardness of 67.6 GPa was obtained for the coatings deposited at an ICP power of 300 W. The crystal structure and preferred orientation in the TiN coatings also varied with the ICP power, exerting an effective influence on film nanohardness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.410.1-410.1
• /
• 2014

A soft-lithographic top-down approach is combined with an epitaxial layer transfer process to fabricate high quality III-V compound semiconductor nanowires (NWs) and integrate them on Si/SiO2 substrates, using MBE-grown ultrathin InAs as a source wafer. The channel width of the InAs nanowires is controlled by using solvent-assisted nanoscale embossing (SANE), descumming, and etching processes. By optimizing these processes, the NW width is scaled to less than 50 nm, and the InAs NWFETs has ${\sim}1,600cm^2/Vs$ peak electron mobility, which indicates no mobility degradation due to the size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.550-552
• /
• 2003

We prepared $Co_{77}Cr_{20}Ta_3$ Magnetic layer for perpendicular magnetic recording media with introduce Two-step methode and Amorphous Si Underlayer on slide glass substrate. The thickness of magnetic layer were 100nm, and Underlayer were varied from 5 to 100 nm. The multi layer Properties of crystal structure were examined with XRD. Prepared thin films showed improvement of dispersion angle of c-axis orientation ${\Delta}{\theta}_{50}$ caused by inserting Buffer-layer and amorphous Si underlayer.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.237-238
• /
• 2014

비정질 투명 전도성 산화물의 전기적 특성을 개선하기 위해 불순물 도입을 통한 연구가 많이 진행되고 있다. 하지만 50 nm의 박막 두께에서는 물론, 얇은 박막 두께에 맞춰 극미량의 Sn 첨가를 통한 4성분계 IZO에 대한 연구는 보고된 바 없다. 본 연구에서는 DC 마그네트론 스퍼터링 법을 이용하여 Sn을 미량 도핑 한 50 nm IZO 박막을 제조하였으며, 후열처리 전후의 전기적, 기계적, 광학성 특성을 비교 분석 하였다. Sn이 미량 도핑 되었을 때 전기적 특성이 개선되었고, 이러한 현상은 후열처리 온도에 따라 뚜렷하게 관찰되었다. 이것은 불순물 Sn이 전기적으로 활성화되었기 때문이라고 생각된다.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.2
• /
• pp.143-147
• /
• 2008

To develop a new anti-wrinkle agent from medicinal plants, this study investigated the optimal conditions for extracting elastase inhibitor from Rheum undulatum L. Maximal extraction occurred by using 70% methanol at $50^{\circ}C$ for 24 hr; the elastase inhibitory activity was 60.4%($IC_{50}:6.7{\times}10^3{\mu}g/m{\ell}$). Systematic solvent extraction, thin layer chromatography, silica gel column chromatography, Sephadex LH-20 column chromatography, and reverse-phase high performance liquid chromatography were used in the partial purification of the elastase inhibitor. The compound was soluble in dimethylsulfoxide, methanol, and ethanol, and had maximum absorption spectra at 231.5 nm and 275.5 nm.

• Journal of Powder Materials
• /
• v.15 no.6
• /
• pp.466-470
• /
• 2008

Experiments with a URT-0.5 accelerator (0.5 MeV, 50 ns, 1 kW) generating a nanosecond electron beam for irradiation of silver nitrate in various liquid solutions (water and toluene) were performed with the aim of producing silver nanopowders. A radiochemical reaction allows making weakly agglomerated pure Ag powders with particles of 10-15 nm and 30-50 nm in size by irradiation in toluene and water respectively. The injection of the nanosecond electron beam energy to the solution is optimal. As the absorbed dose increases, the output of the radiochemical reaction does not grow, but more agglomerated powders are synthesized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.268-270
• /
• 2002

For analysis of semiconductor's electrons transmission characteristics, Impact ionization(I.I.) is very important. I.I. are generation process of electron-hole pairs. Therefore, the characteristics of device can change along with applied voltage or temperature. In this paper, we are scaled down the gate length to 50nm. Also, using TCAD simulator, we are analyzed I.I. and breakdown about three models-Van Overstraeten , Okuto and Ours models.