• Korean Journal of Materials Research
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2009

Electrolessly deposited Co (Re,P) was investigated as a possible capping layer for Cu wires. 50 nm Co (Re,P) films were deposited on Cu/Ti-coated silicon wafers which acted as a catalytic seed and an adhesion layer, respectively. To obtain the optimized bath composition, electroless deposition was studied through an electrochemical approach via a linear sweep voltammetry analysis. The results of using this method showed that the best deposition conditions were a $CoSO_4$ concentration of 0.082 mol/l, a solution pH of 9, a $KReO_4$ concentration of 0.0003 mol/l and sodium hypophosphite concentration of 0.1 mol/L at $80^{\circ}C$. The thermal stability of the Co (Re,P) layer as a barrier preventing Cu was evaluated using Auger electron spectroscopy and a Scanning calorimeter. The measurement results showed that Re impurities stabilized the h.c.p. phase up to $550^{\circ}C$ and that the Co (Re,P) film efficiently blocked Cu diffusion under an annealing temperature of $400^{\circ}C$ for 1hr. The good barrier properties that were observed can be explained by the nano-sized grains along with the blocking effect of the impurities at the fast diffusion path of the grain boundaries. The transformation temperature from the amorphous to crystal structure is increased by doping the Re.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.4
• /
• pp.373-376
• /
• 2003

Objectives : Peripheral blood-buffy coat fractions (N=14,956) have been stored at $-70^{\circ}C$ in the headquarter of the Korean Multicenter Cancer Cohort (KMCC), since 1993. To study the future molecular etiology of cancers using specimens of the cohort, properly stored specimens are necessary, Therefore, the DNA-viability of the bully coat samples was investigated. Methods : Buffy coat fraction samples were randomly selected from various collection areas and years (N=100). The DNA viability was evaluate from the UV-absorbent ratios at 260/280nm and the PCH for $\beta$-globin was performed with genomic DNA isolated from the buffy coat. Results : PCR products were obtained from 85 and 98% of the C and H area-samples, respectively, using 50 or $100{\mu}l$ of the buffy coat. There were significant differences in the yields of the PCR-amplifications from the C and H areas (p<0.05), which was due to differences in the homogenization of the buffy coat fractions available as aliquots. The PCR-products were obtained from all of the samples (N=7) stored at the C area-local confer, but the other aliquots stored at the headquarter were not PCR-amplified, Therefore, the PCR products in almost all the samples, even including the DNA-degraded samples, were obtained. In addition, an improvement in the DNA isolation, i,e. approx. 1.6 fold, was found after using extra RBC lysis buffer. Conclusions : PCR products for $\beta$-globin were obtained from nearly all of the samples. The regional differences in the PCR amplifications were thought to have originated from the different sample-preparation and homogenization performance. Therefore, the long term-stored buffy coat species at the KMCC can be used for future molecular studies.

• KSBB Journal
• /
• v.21 no.5
• /
• pp.360-365
• /
• 2006

The objectives of this study were to develop nano-pore silica particles and to modify its surface for use as an enzyme immobilization matrix. Sol-gel reaction was used to produce silica particles of various nano pore sizes with hydroxyl groups on their surfaces. The surface was modified with aldehyde that was confirmed by fluorescence imaging. Trypsin was covalently immobilized by reductive amination. Surface density of the immobilized trypsin was ca. $350{\mu}g/m^2$, which was approximately 17- and 35-fold higher than those from the surfaces with hydroxyl and amine group, respectively. About 90% of the initial enzyme activity was maintained after the 12th use of repeated use. When compared with the commercial matrices, the nano-pore silica particle was superior in terms of immobilization yield and specific activity. This study suggests the nano porous silica particles can be used as enzyme immobilization matrix for industrial applications.

• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.306-309
• /
• 2007

PXLM(Phosphor based x-ray light modulator) has a combined structure by phosphor, photoconductor, and liquid crystal and it can realize x-ray image of high resolution in clinical diagnosis area. In this study, we fabricated a photoconductor and investigated electrical and optical properties to confirm application possibility of radiator detector of PXLM structure. As photoconductor, amorphous selenium(a-Se), which is used most in DR(Digital radiography) of direct conversion method, was used and for formation of thin film, it was formed as $20{\mu}m-thick$ by using thermal vacuum evaporation system. For a produced a-Se film, through XRD(X-ray diffraction) and SEM(Scanning electron microscope), we investigated that amorphous structure was uniformly established and through optical measurement, for visible light of 40 $0\sim630nm$, it had absorption efficiency of 95 % and more. After fabricated a-Se film on the top of ITP substrate, hybrid structure was manufactured through forming $Gd_2O_3:Eu$ phosphor of $270{\mu}m-thick$ on the bottom of the substrate. As the result to confirm electrical property of the manufactured hybrid structure, in the case of appling $10V/{\mu}m$, leakage current of $2.5nA/cm^2$ and x-ray sensitivity of $7.31nC/cm^2/mR$ were investigated. Finally, we manufactured PXLM structure combined with hybrid structure and liquid crystal cell of TN(Twisted nematic) mode and then, investigated T-V(Transmission vs. voltage) curve of external light source for induced x-ray energy. PXLM structure showed a similar optical response with T-V curve that common TN mode liquid crystal cell showed according to electric field increase and in appling $50\sim100V$, it showed linear transmission efficiency of $12\sim18%$. This result suggested an application possibility of PXLM structure as radiation detector.

• Journal of Oral Medicine and Pain
• /
• v.23 no.1
• /
• pp.11-20
• /
• 1998

저자는 치과용 레이저를 이용한 상아질지각과민증 치료효과를 임상적으로 평가하고자 상아질지각과민증환자 24명을 대상으로 각 환자마다 상아질 지각과민 치아 중 레이저로 치료 할 치아1개(실험군)와 치료하지 않을 치아 1개(대조군)를 선정하여, 치과용 air-syringe에 의한 냉자극과 치과용 탐침자에 의한 기계적 자극을 가한 후 Visual Analogue Scale(VAS)을 통해 지각과민증 정도를 평가하였으며, 이후 실험군 치아의 치경부 마모면에 광섬유 레이저에너지 전달방식의 펄스형 Nd:YAG 레이저의 일종인 Sunlase Master(Sunrise Technologies Inc., U.S.A., 파장 1064nm, 펄스지속시간 120(sec, 광섬유직경 320(m)를 사용하여, 0.3-1.0W, 10Hz 조건으로 환자의 반응에 따라 1회2분을 초과하지 않는 범위 내에서 비접촉식과 접촉식을 병행하여 3회에 걸쳐(초진 당일, 1일후, 3일후) 레이저를 조사한 후 처음조사 직후, 그리고 초진 1일후, 3일후, 7일후, 14일후 VAS를 채득하여 조사전과 비교, 분석, 평가하였던 바, 상아질 지각과민증이 각각 약 50%, 약36%, 약45%, 약 53% 감소하였으나 (p(0.05) 경시적으로는 유의한 차이를 보이지 않았다. 그리고 24명중 9명에 대해서는 초진 30일 후 까지 레이저조사치료효과를 평가하였던 바, 상아질지각과민증이 처음조사 직후, 감소하였으며 (p(0.05)역시 경시적으로는 유의한 차이를 보이지 않았다. 초진 30일 후 상아질지각과민증이 초진 14일 후에 비해 약간 증가되는 경향을 보여, 레이저조사 치료효과가 약화되는 경향인지 여부에 대해 향후 추가적인 연구가 필요할 것으로 사료된다.안되었다.기란 현실적으로 불가능하므로, 본 연구에서는 이러한 제약점을 극복할 수 있는 근사적인 지체시간을 계산하는 방법을 제시한 점에서 의미를 갖을 수 있다.수들은 직업의 선택이나 소득을 예측하기 위한 요소들로 포함될 수 없었다. 따라서 후속연구에서는 이를 보완해야 할 것이며, 최근 들어 우리 나라에서도 재택근무에 대한 관심이 대두되고 있으나 아직 개념정의나 그 중요성과 가치, 그리고 실태 파악과 같은 연구가 활발히 이루어지지 못하고 있으므로 이에 대한 심층적인 연구가 행해져야 할 것이다.d similar flower proceeding dates in all branches. but "Daepung" showed similar flower proceeding dates in all branches.est in HB. Mean period of wetting duration was in the order of DS＞HB＞MB, while the dew point depression was greatest in DS.ANCOVA, Pearson correlation을 이용하여 분석하였으며, 그 결과는 다음과 같다. 캠프 프로그램은 소아 당뇨병 환자의 자기 효능을 증진시키고 환자 역할 행위 이행을 높여주는데 효과적 이었다. 소아 당뇨병 환자의 자기 효능은 환자 역할 행위 이행과 순 상관 관계가 있어, 자기 효능이 증진될수록 환자 역할 행위 이행 정도가 높아졌다. 무조건 사주지 않는다(8.0%), 무조건 사준다(3.1%)로 식품광고에 나오는 식품 요구시 부모의 70.3%가 거절하는 것으로 나타났다. 거절 이유는 건강에 나쁘다는 것이 가장 큰 이유였으며 강남과 강북 어린이간에 유의적인 차이가 있었다(p＜0.001).

• Toxicological Research
• /
• v.24 no.1
• /
• pp.87-91
• /
• 2008

The present study was conducted to monitor the level of triflumizole residues in fruits (apple and pear) and vegetable (cucumber) samples in order to assess risk posed by the presence of such residues to the consumer. Triflumizole was applied at a recommended dose rate to apple and pear pulps and to a cucumber sample. The samples were collected at harvesting time following several treatments (three and/or four treatments). Triflumizole was extracted with methanol and re-extracted into dichloromethane. The presence of triflumizole was determined by HPLC with UV detection at 238 nm following the cleanup of the extract by open preparative chromatographic column with Florisil. The versatility of this method was evidenced by its excellent linearity (> 0.999) in the concentration range between 0.2 and 4.0 mg/kg. The mean recoveries evaluated from the untreated samples spiked at two different fortification levels. 0.1 and 0.4 mg/kg, and ranged from 87.5${\pm}$0.0 to 93.3${\pm}$2.6 for the tested fruits and vegetable, respectively, and the repeatability (as relative standard deviation) from three repetitive determinations of recoveries were no larger than 6%. The calculated limit of detection was 0.02 mg/kg and the minimum detectable level of 4 ng for triflumizole was easily detected. When triflumizole was sprayed onto the apple trees three times at 50-40-30 and 40-30-21 days prior to harvesting and four times onto the pear trees at 40-30-21-14 days prior to harvesting, the mean residual amounts of 0.05 and 0.06 mg/kg for apples and pears, respectively, were not detected in all of the treatments. When the cucumber sample was fumigated four times at 7, 5, 3 and 1 day prior to harvesting, the mean residual amount was not detectable. Triflumizole can be used safely when sprayed (wettable powder, 30% active ingredient) and fumigated (10%) 4 times at 14 and 1 day prior to harvesting to protect the fruits and vegetable, respectively.

• Journal of Microbiology
• /
• v.42 no.1
• /
• pp.25-31
• /
• 2004

Sf9 cells have obvious advantages for the conventional production technology of vaccine. They are useful tools for high concentration and large-scale cultures. Sf9 cells were grown to maximal concentration, 8${\times}$l0$\^$6/ cells/$m\ell$ in a 500$m\ell$ spinner flask, with a doubling time at the exponentially growing phase of 24.5 hours, using serum-free media. To explore the ability of Sf9 cells to be infected by the Japanese encephalitis (JE) virus Beijing-l strain, Sf9 cells were infected with the virus. By 4-5 days post-infection, 10-15 % of the Sf9 cells showed cytopathic effect (CPE), from granularity to the formation of syncytia and multinucleated giant cells continuously observed over a period of 35 days. Positive fluorescent reactions were detected in 30-40% of cells infected with the JE virus Beijing-l strain, and the uninfected Sf9 cells were completely negative. Virus particles, propagated in Sf9 and Vero cells, were concentrated by sedimentation on 40% trehalose cushions by ultracentrifugation, and showed identical patterns of viral morphogenesis. Complete virus particles, 40 to 50 nm in diameter, were observed, and JE virus envelope (E) proteins, at 53 kDa, were found in the western blot analysis to the anti-JE virus E protein monoclonal antibody and reacted as a magenta band in the same position to the glycoprotein staining. To evaluate whether the infectious virus was produced in Sf9 cells inoculated with the JE virus Beijing-l stain, Sf9 cells were inoculated with the virus, and sample harvested every 5 days. The titers of the JE virus Beijing-l strain rose from 1.0${\times}$l0$\^$5/ to 1.5${\times}$l0$\^$6/ pfu/$m\ell$. The infected Sf9 cells could be subcultured in serum-free medium, with no change in the plaque sizes formed by the JE virus Beijing-l strain in the plaque assay. It is suggested that the ability of the JE virus Beijing-l strain to infect Sf9 cells in serum-free media will provide a useful insect cell system, where the JE virus replication, cytopathogenicity and vaccine immunogen can be studied.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.1
• /
• pp.10-15
• /
• 2014

Regenerated Antheraea pernyi silk sponge was prepared using calcium nitrate 4 hydrate melt and examined the conformational changes treated with aqueous ethanol solution. The conformation of silk sponges was changed from random coil structure to ${\beta}$-sheet and ${\alpha}$-helix conformation with low ethanol concentration (50 ~ 70%). On the other hand, that of silk sponges with 80% ethanol treatment showed ${\beta}$-sheet ($700cm^{-1}$), ${\alpha}$-helix ($625cm^{-1}$), and random coil ($660cm^{-1}$) specific peaks. Wound healing effect in vitro was observed by cytoslective wound healing kit. Therefore, regenerated Antheraea pernyi silk sponges might be used as promising wound dressing materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.697-698
• /
• 2013

최근에 유연한 성질을 갖는 전자기기들의 수요가 증가하면서, 그에 따라서 유연 전자기기를 뒷받침 해줄 수 있는 에너지 저장체의 유연한 성질도 중요성이 점점 부각되고 있으며 많은 연구가 진행되고 있다. 유연한 에너지 저장체의 많은 연구들이 유연한 금속 박막이나 특수 공정처리가 필요한 고분자를 이용하고 있으나, 대부분의 유연 에너지 소자들은 에너지 저장체의 성능에 비해 고온과 산 약품과 같은 환경이 필요하며, 비용과 시간이 많이 소모되고 있다. 그에 반해 섬유는 앞에서와 같이 특수 공정 처리가 따로 필요하지 않으며 상온에서도 손 쉽게 이용 가능하며, 신축성이 뛰어난 장점이 있기 때문에 효율적, 비용적으로 유연한 에너지 저장체에 유리한 소재이다. 몸에 해로운 산과 같은 약품처리의 필요도 없으며, 용매를 흡수하는 능력이 뛰어나기 때문에 용매를 이용한 도포 방법을 사용하면 다양한 물질을 폭넓게 적용 가능하다. 그리고 적용 분야에 맞춰서 섬유의 종류를 조절하면 다양한 성질을 갖는 천 기반의 에너지 저장체가 형성되며, 면 섬유가 수소 결합과 높은 반데르 발스 결합에 의해 탄소나노튜브와 결합하여 높은 에너지 밀도를 갖는 에너지 저장체를 형성하는 것을 분석한 논문들도 보고되고 있다. 면 섬유의 특수한 성질을 이용하여 에너지 저장체를 제작하고 이를 확인하기 위해서 일반 합성 섬유인 polyester와 면 섬유를 비교 제작하였으며, 용매의 형태로 손쉽게 도포 가능한 물질은 탄소 계열의 활물질들이며, 탄소 나노 튜브나 그래핀 등이 분산된 용액을 이용해 천에 도포 가능하다. 탄소 계열의 활물질들은 대표적인 슈퍼캐패시터 물질이며, 천에 도포를 함으로써 천 기반의 슈퍼캐패시터를 제작하였다. 일반 합성 섬유 polyester와 CNT를 결합한 형태의 전극은 최대 에너지 축전 용량(Maximum specific capacitance)이 53.6 F/g으로 나타났으며, 면 섬유와 CNT를 결합한 형태의 전극은 최대 에너지 축전 용량이 122.1 F/g으로 나타났다. 따라서 면 섬유에서 높은 에너지 저장 능력을 보이는 것을 실험적으로 확인하였으며, 에너지 저장 능력이 뛰어난 면 섬유를 다음 전극 디자인에서도 일률적으로 적용하였다. 슈도캐패시터의 대표적 물질인 금속 산화물인 망간 산화물(MnO2)을 3전극 도금 시스템을 이용하여 에너지 축전 용량과 에너지 밀도를 올리는 전극을 제작하였다. 특히 망간 산화물의 형태는 표면적을 극대화하기 위해서 평균 지름은 200~300 nm 정도 되는 나노 입자의 형태로 제작하였다. 그 결과, 확연하게 에너지 축전 용량이 향상되었으며, 최대 에너지 축전 용량은 282.0 F/g, 에너지전력 밀도는 14.2 Wh/kg으로 나타나서 금속 산화물의 형태가 주는 효과를 확인할 수 있었다. 하지만 나노 입자의 형태로 제작된 금속 산화물은 문제점이 발생하였다. 금속 산화물의 전기 전도성이 매우 낮기 때문에, 전기 전도성에 비례해서 전력 밀도의 값이 표현되는데, 전기 전도성이 급격히 감소하기 때문에 전력 밀도도 급격한 감소가 나타난다. 다음과 같이 전기 전도성 물질을 첨가하는 방법은 추가의 공정이 필요한 단점이 있지만 오직 기계적인 인장응력만을 가해서 에너지 밀도와 전력 밀도를 증가시키는 전극을 제작하였다. 인장응력을 섬유 기반의 전극에 가했을 시에 가닥들간의 접촉 증가와 CNT가 정렬되면서 특정 변형률(strain) 이전에서는 전기 전도성이 최대 50% 이상 증가하는 것을 확인할 수 있었으며, 선행 연구에서 보고되었다. 이를 이용해서 전기 전도성과 직결되는 전력 밀도의 양도 증가시키고 에너지 밀도의 증가 여부까지 확인한 결과 인장을 가하기 전 면 섬유의 전력 밀도와 에너지 밀도는 6.4 kW/kg and 6.1 Wh/kg으로 나타났으나 30% 변형 인장 후에는11.4 kW/kg과 7.1 Wh/kg으로 나타났다. 그리고 망간 산화물을 첨가한 전극 역시 4.9 kW/kg과 14.2 Wh/kg으로 나타났었으나 인장 이후 전력 밀도는 14.2 kW/kg, 에너지 밀도는 17.6 Wh/kg으로 확연하게 증가한 것을 확인하였다.

• Korean Journal of Food Science and Technology
• /
• v.49 no.1
• /
• pp.110-116
• /
• 2017

${\gamma}-Oryzanol-loaded$ calcium-pectin micro- and nanocapsules were prepared by ionic gelation to improve oxidation stability and the effect of particle size on capsule properties was investigated. The physical properties were influenced by preparation conditions such as concentrations of pectin, $CaCl_2$, ${\gamma}-oryzanol$, and hardening time. Particle sizes of micro- and nanocapsules that showed the maximum encapsulation efficiency and sustained release were $2.27{\pm}0.02mm$ and $347.7{\pm}58.1nm$, respectively. Microcapsules showed higher encapsulation efficiency ($50.73{\pm}1.98%$) than nanocapsules ($17.70{\pm}2.04%$), while nanocapsules showed more sustained release and higher stability than microcapsules. Release of ${\gamma}-oryzanol$ from both microand nanocapsules, which was low in gastric environments and promoted in intestinal environments, showed suitable characteristics for oral administration. Furthermore, antioxidant activity of ${\gamma}-oryzanol$ against autoxidation of linoleic acid was prolonged by both micro- and nanoencapsulation in a ferric thiocyanate test. Therefore, micro- and nanoencapsulation using pectin can be effective for improving biodelivery, stability, and antioxidant activity of ${\gamma}-oryzanol$.