• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.147-151
• /
• 2016

Graphene has a monolayer crystal structure formed with C-atoms and has been used as a base layer of HETs (hot electron transistors). Graphene HETs have exhibited the operation at THz frequencies and higher current on/off ratio than that of Graphene FETs. In this article, we report on the preliminary results of current characteristics from the HETs which are fabricated utilizing highly doped Si collector, graphene base, and 5 nm thin $Al_2O_3$ tunnel layers between the base and Ti emitter. We have observed E-B forward currents are inherited to tunneling through $Al_2O_3$ layers, but have not noticed the Schottky barrier blocking effect on B-C forward current at the base/collector interface. At the common-emitter configuration, under a constant $V_{BE}$ between 0~1.2V, $I_C$ has increased linearly with $V_{CE}$ for $V_{CE}$ < $V_{BE}$ indicating the saturation region. As the $V_{CE}$ increases further, a plateau of $I_C$ vs. $V_{CE}$ has appeared slightly at $V_{CE}{\simeq}V_{BE}$, denoting forward-active region. With further increase of $V_{CE}$, $I_C$ has kept increasing probably due to tunneling through thin Schottky barrier between B/C. Thus the current on/off ration has exhibited to be 50. To improve hot electron effects, we propose the usage of low doped Si substrate, insertion of barrier layer between B/C, or substrates with low electron affinity.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.191-199
• /
• 1994

Protoplasts of both strains were produced by lysozyme digestion at $30^{\circ}C$ for 180min. Both strains were treated with $40{\mu}g$/ml of lysozyme in 30mM Tris-HCl buffer(pH 7.5) containing 10% sucrose at the late logarithmic growth phase. It was found that the efficiency of protoplast formation was high at $30^{\circ}C$ and pH 7.5 by measuring the decrease in absorbance. Optimum concentrations of sucrose $Ca^{2+}, \;Mg^{2+}$ for protoplast formation were determined to be 15%, 20mM and 6mM, respectively. Hydrolysis of cell wall and protoplast formation efficiency for L. plantarum showed better results than those for Leu. mesenteroides. The resistances to antibiotics erythromycin and chloramphenicols were chosen as the selection marker for the fusant between L. plantarum and Leu. mesenteroides. Production phase of protoplast in Leu. mesenteroides was also compared with L. plantarum in this paper.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1182-1190
• /
• 2014

$Cd_{1-x}Zn_xS$-sensitized $K_4Nb_6O_{17}$ composite photocatalysts (designated $Cd_{1-x}Zn_xS/K_4Nb_6O_{17}$) were prepared via a simple deposition-precipitation method. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), $N_2$ sorption, ultraviolet-visible light diffuse reflectance spectroscopy (UV-Vis DRS), photoluminescence measurements (PL), and X-ray photoelectron spectroscopy (XPS). The $Cd_{0.8}Zn_{0.2}S$ particles were scattered on the surface of $K_4Nb_6O_{17}$, and had a relatively uniform size distribution around 50 nm. The absorption edge of $K_4Nb_6O_{17}$ was shifted to the visible light region and the recombination of photo-generated electrons and holes suppressed after $Cd_{0.8}Zn_{0.2}S$ loading. The $Cd_{0.8}Zn_{0.2}S$(25 wt %)/$K_4Nb_6O_{17}$ composite possessed the highest photocatalytic activity for hydrogen production under visible light irradiation, evolving 8.278 mmol/g in 3 h. Recyclability tests were performed, and the composite photocatalysts were found to be fairly stable. The mechanism of charge separation between the photogenerated electrons and holes at the $Cd_{0.8}Zn_{0.2}S/K_4Nb_6O_{17}$ composite was discussed.

• Biomedical Science Letters
• /
• v.15 no.1
• /
• pp.87-91
• /
• 2009

In photodynamic therapy (PDT), oxygen plays important role. Because of singlet oxygen which is produced by activated photosensitizer after laser irradiation of specific wavelength. The aim of this study is to find how oxygen concentration affects anticancer effect in PDT. Groups were divided into PDT with oxygen applied group and only PDT applied group. PDT with oxygen applied group supplied oxygen for 15 minute before laser irradiation. In vitro, CT-26 cell was incubated with various concentration of photofrin $(50.0{\sim}0.05{\mu}g/ml)$ and was irradiated with 632nm diode laser 6hr after application of photofrin. The cell viability of two groups was assessed by MTT assay. In vivo, CT-26 cell line was transplanted into the subcutaneous tissue of BALB/c mouse. The anticancer effect of two groups was measured by tumor volume change. In vitro study, the cell viability was significantly decreased at $1.56{\sim}3.13{\mu}g/ml$ in PDT with oxygen applied group. In vivo study, the PDT with oxygen applied group significantly higher reduction rate of tumor volume 7 days after PDT compared to PDT only group. The high oxygen concentration might enhance the anticancer effect of the photodynamic therapy.

• Steel and Composite Structures
• /
• v.24 no.4
• /
• pp.399-408
• /
• 2017

Of high strength bolts, the torque shear type bolt is known to be clamped normally when pin-tails are broken. Sometimes the clamping loads on slip critical connections considerably fluctuate from the required tension due to variation of torque coefficient. This is why the viscosity of lubricant affects the torque coefficient by temperature. In this study, the clamping tests of high strength bolts were performed independently at laboratory conditions and at outdoor environment. The temperatures of outdoor environment candidates were ranged from $-11^{\circ}C$ to $34^{\circ}C$ for six years. The temperature at laboratory condition was composed from $-10^{\circ}C$ to $50^{\circ}C$ at each $10^{\circ}C$ interval. At outdoor environment conditions, the clamping load of high strength bolt was varied from 159 to 210 kN and the torque value was varied from 405 to 556 Nm. The torque coefficients at outdoor environment were calculated from 0.126 to 0.158 when tensions were measured from 179 to 192 kN by using tension meter. The torque coefficients at outdoor environment conditions were analyzed as the range from 0.118 to 0.152. From these tests, the diverse equations of torque coefficient, tension dependent to temperature can be acquired by statistic regressive analysis. The variable of torque coefficient at laboratory conditions is 0.13% per each $1^{\circ}C$ when it reaches 2.73% per each $1^{\circ}C$ at outdoor environment conditions. When the results at laboratory conditions and at outdoor environment were combined to get the revised equations, the change in torque coefficient was modified as 0.2% per each $1^{\circ}C$ and the increment of tension was adjusted as 1.89 % per each $1^{\circ}C$.

• YAKHAK HOEJI
• /
• v.57 no.4
• /
• pp.272-281
• /
• 2013

In this study, we developed and validated the HPLC method using the isolated components from Erycibae caulis. Their structures were elucidated by spectroscopic methods including UV, $^1H$-NMR, $^{13}C$-NMR, FAB-Mass and ESI-Mass as Compound 1 (crypto-chlorogenic acid), Compound 2 (scopolin), Compound 3 (neochlorogenic acid) and Compound 4 (3,4-di-O-caffeoylquinic acid). Major three compounds and scopoletin were decided as representative components of Erycibae caulis. We established HPLC analytical method by using the representative components and 20 commercial samples which were collected considering to various cultivated area. The HPLC fingerprinting was successfully achieved with an AKZO NOBEL Kromasil 100-5C18 column. The mobile phase consisted of 0.5% acetic acid in water (A) and methanol (B) using gradient method of 85(A) to 50(A) for 35min. The fingerprints of chromatograms were recorded at an optimized wavelength of 330 nm. This developed analytical method was validated with specificity, selectivity, accuracy and precision. And it is suggested that scopolin, scopoletin, neochlorogenic acid, 3,4-di-O-caffeoylquinic acid were more than 0.162%, 0.133%, 0.057%, 0.044%, respectively. In addition, principal component analysis (PCA) was performed on the analytical data of 20 different Erycibae caulis samples in order to classify samples collected from different regions. We hope that this assay can be readily utilized as quality control method for Erycibae caulis.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.137-144
• /
• 2009

In this study, quantitative and pattern recognition analyses for the quality evaluation of Herba Epimedii using HPLC was developed. For quantitative analysis, five major bioactive constituents, hyperin, epimedin A, epimedin B, epimedin C, and icariin were determined. Analysis was carried out on Capcell pak $C_{18}$ column ($250{\time}4.6$ mm, 5 ${\mu}m$) with a mobile phase of mixture of acetonitrile and 0.1% formic acid, using UV detection at 270 nm. The linear behavior was observed over the investigated concentration range (2-50 ${\mu}g/mL;\;r_2\;>$ 0.99) for all analytes. The intraand inter-day precisions were lower than 4.3% (as a relative standard deviation, RSD) and accuracies between 95.1% and 104.4%. The HPLC analytical method for pattern recognition analysis was validated by repeated analysis of one reference sample. The RSD of intra- and inter-day variation of relative retention time (RRT) and relative peak area (RPA) of the 12 selected common peaks were below 0.8% and 4.7%, respectively. The developed methods were applied to analysis of twenty Herba Epimedii extract samples. Contents of hyperin, epimedin A, epimedin B, epimedin C, and icariin were calculated to be 0$\sim$0.79, 0.69$\sim$1.91, 0.93$\sim$9.58, 0.65$\sim$3.05, and 2.43$\sim$11.8 mg/g dried plant. Principal component analysis (PCA) showed that most samples were clustered together with the reference samples but several apart from the main cluster in the PC score plot, indicating differences in overall chemical composition between two clusters. The present study suggests that quantitative determination of marker compounds combined with pattern-recognition method can provide a comprehensive approach for the quality assessment of herbal medicines.

• Korean Journal of Materials Research
• /
• v.20 no.1
• /
• pp.47-50
• /
• 2010

Various thicknesses of Al-doped ZnO (AZO) films were deposited on glass substrate using pulsed dc magnetron sputtering with a cylindrical target designed for large-area high-speed deposition. The structural, electrical, and optical properties of the films of various thicknesses were characterized. All deposited AZO films have (0002) preferred orientation with the c-axis perpendicular to the substrate. Crystal quality and surface morphology of the films changed according to the film thickness. The samples with higher surface roughness exhibited lower Hall mobility. Analysis of the measured data of the optical band gap and the carrier concentration revealed that there were no changes for all the film thicknesses. The optical transmittances were more than 85% regardless of film thickness within the visible wavelength region. The lowest resistivity, $4.13\times10^{-4}\Omega{\cdot}cm^{-1}$ was found in 750 nm films with an electron mobility $(\mu)$ of $10.6 cm^2V^{-1} s^{-1}$ and a carrier concentration (n) of $1.42\times10^{21} cm^{-3}$.

• YAKHAK HOEJI
• /
• v.49 no.2
• /
• pp.134-139
• /
• 2005

Warfarin is a widely used oral anticoagulant agent used to treat thromboembolic disease. The purpose of this study was to develop the efficient assay method of warfarin sodium i n human plasma and to assess the pharmacokinetic profile of the warfarin in healthy Korean volunteers. The pharmacokinetics of warfarin administered orally was evaluated after a dose of 10 mg. Warfarin in plasma was assayed using a specific HPLC method with UV absorbance at 304 nm. AUC was 46.33${\pm}9.95{\mu}g/ml.hr$, $C_{max}$ $1.22{\pm}0.22{\mu}g/ml, $T_{max}$$2.50{\pm}1.41$ hr and half-life $43.49{\pm}4.33$ hr. $T_{max}$ was slightly shorter than that in Caucasian (3~9 hr), whereas the half-life was longer than that in Caucasian (10~45 hr, mean: 36 hr). These results suggest that warfarin may have a longer duration in Korean than in Caucasian.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.297-301
• /
• 2003

An inhibitor of squalene synthase, a key enzyme in the cholesterol biosynthetic pathways and a target for improved agents to lower plasma levels of low-density lipoprotein, was sequentially purified from Curcuma longa by acetone extraction, silica gel column chromatography, and sephadex LH-20 column chromatography. Active compound, YUF-01, was successfully purified and analyzed as $C_{20}H_{21}O_6$ by electron ionization mass spectrum. Through $^1H-NMR$ and $^{13}C-NMR$ analyses, YUF-01 was identified as curcumin, which showed strong inhibition of squalene synthase.