• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.11-18
• /
• 2014

PURPOSES : This study aims to develop a strength test method for irregularly shaped concrete block paver. METHODS : Ten (10) different types of concrete block pavers including porous and dense blocks were tested for strength capacities. Destructive and non-destructive methods were used to develop a strength test method for irregularly shaped concrete block paver. The flexural strength evaluation was conducted in accordance to KS F 4419, while compressive strength was conducted with a 45.7mm-diameter core specimen. The impact echo test method was used to evaluate the elastic modulus. Finally, regression analysis was used to investigate the relationship between flexural strength, compressive strength and elastic modulus based on their corresponding test results. RESULTS : The flexural strength of the tested block pavers ranged from 4MPa to 10MPa. At 95% confidence level, the coefficients of determination between compressive-flexural strength relationship and compressive strength-elastic modulus relationship were 0.94 and 0.84, respectively. These coefficients signified high correlation. CONCLUSIONS : Using the test method proposed in this study, it will be easier to evaluate the strength of irregularly shaped concrete block pavers through impact echo test and compressive test, instead of the flexural test. Relative to the flexural strength requirement of 5MPa, the minimum values of compressive strength and elastic modulus, as proposed, are 13.0MPa and 25.0GPa, respectively.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.41-48
• /
• 2014

PURPOSES : The lane width of the domestic highway is 3.5 ~ 3.6m and it has been designed nationwide. However, the distribution of the average vehicle widths, rearview mirror widths and lateral wheel paths by region appear different. Then, lane spare widths may differ by region followingly. Thus, the flexible design of freeway lane widths is required. METHODS : The methodologies of this paper are as follows. First, vehicle widths rearview mirror widths lateral wheel paths of vehicles driven four national expressways were measured. Second, lane spare widths by vehicle widths were calculated. Third, lane spare widths reflecting rearview mirror widths were calculated by using interval estimation. Additionally, lane spare widths reflecting vehicles lateral wheel paths were calculated. RESULTS : The results of this paper are as follows. First, lane spare widths by vehicle widths ranges 0.83 to 0.95m. Second, lane spare widths reflecting rearview mirror widths ranges 0.518 to 0.747m at the confidence interval 95%. Third, lane spare widths reflecting vehicles' lateral wheel paths ranges -0.022 to 0.322m at the curved sections and the confidence interval 95%. CONCLUSIONS : It may be concluded that the present lane spare widths are relatively narrow at the curved section. Thus, there is a need to consider expanded lane widths at the curved sections. Additionally, there is a need to consider flexible design of lane widths by various conditions.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.111-118
• /
• 2014

PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.

• Journal of Forest and Environmental Science
• /
• v.16 no.1
• /
• pp.1-16
• /
• 2000

This study was carried out to examine the process of plant succession through vegetation invasion and to select appropriate endemic plant species for rapid stabilization and good visual effect on cut-slopes of forest roads. Establishing total of sixty $1m{\times}1m$ sample plots. fifteen for each forest road constructed in the year of '93 (six-year-old), '95(four-year-old), '97(two-year-old), and '98(one-year-old), the ecological attributes of invading vegetation on cut-slopes were analyzed. The results are summarized as follows: 1. The rate of vegetation coverage was highly associated with soil hardness and aspect of cut-slope. Higher rate of vegetation coverage was caused by larger number of invading plant species. 2. The dominant woody species were Rubus crataegifolius, Rhus chinensis, Lespedeza bicolor, Salix hulteni, Alnus hirsuta, and Pinus densiflora. The visual attractive for the fruit of Rubus crataegifolius and the autumn coloration of Rhus chinensis was noteworthy. The dominant herbaceous species were Youngia sonchifolia, Spodiopogon sibiricus, and Lysimachia clethroides in all study forest roads. Spring flower of Potentilla freyniana and Viola rossii: summer flower of Lysimachia clethroides, Commelina communis, Glycine soja. Persicaria sieboldi, and Oenothera odorata: and autumn flower of Artemisia stolonifera and Impatiens textori were abundant and remarkable. 3. The diversity index of woody species tended to be increased as years passed after construction, and that of herbaceous species were decreased. 4. The dominance of Th of dormancy form was early high in the first year of construction, getting decreased thereafter. And that of MM + M + N was increased as years passed after construction. but that of Ch+H+G+Th+HH was decreased. 5. The degrees of succession were estimated by 359, 111, 97, and 87 for the construction year of '93, '95, '97, and '98. respectively, increased as years passed after construction.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.5-6
• /
• 2019

최근 보행자 행태를 반영한 미시적 시뮬레이션 분석이 가능하게 되었다. 차량 분석과 유사하게 보행자 행태 중 가장 빈번히 사용되는 것은 보행속도로 이는 횡단보도 보행자 녹색시간 산정과도 매우 밀접한 관계가 있다. 또한 보도의 밀도를 산정함에 있어서 보행자 속도는 중요한 역할을 담당한다. 이에 본 논문에서는 횡단보도의 보행자 속도를 실측하고, 이를 기반으로 미시적 시뮬레이션인 VISSIM의 주요 파라메타인 보행속도를 이용하여 역삼역 일대의 보행실태를 점검해 보았다. 분석에 사용된 보행속도 실측자료는 서울시 16개 횡단보도에서 조사되었으며, 연령별로 일반인(64세 이하)과 노인(65세 이상)을 구분하여 분석하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.36-45
• /
• 1990

In this study an antilocking-brake-system was set up for the single wheel of passenger cars. The control algorithm for the system was programmed by C-language and executed by a 16bit personal computer, which took the role of an electronic control unit. The performance of the antilocking-brake-system was tested using a test rig, which was specially designed and built up for the simulation of braking on the slippery road. The test results were satisfactory. Although the simulation method of the friction characteristics between the tire and the contact surface on the test rig appeared not to be absolutely suitable, the test rig allowed the basic investigation of the influence of the antilocking brake control on the wheel slip.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.16-17
• /
• 2012

국토해양부는 지방국토관리청의 도로공사와 관련하여 발생하는 공사비 정보의 교환 및 공유를 목적으로 작업분류체계 기반의 공사비 관리 항목을 추가하여 전자설계도서 작성 납품 지침을 개정하였다. 이를 반영하고 문제점 개선 및 활성화를 위하여 5개 지방국토관리청에서 관리중인 10개 도로건설공사를 시범적용 사업으로 지정하여 발생하는 공사비 정보를 디지털 수량산출정보로 관리하고 있다. 시범사업을 진행하면서 건설공사에 발생하는 설계변경 업무를 전자화하여 관리하는 기능을 개발하고 추가 적용하였다. 이를 통해 건설사에서 생성한 설계변경 정보를 건설사와 발주처가 동일한 형태로 공사비 정보를 공유 및 관리 가능하도록 하였다.

• Explosives and Blasting
• /
• v.32 no.2
• /
• pp.1-8
• /
• 2014

In this study, 16 test blastings had been carried out with different spacings, burdens, drilling lengths, and charges per delay for investigating the characteristics of ground vibration propagation, which depends on the delay time. From the tests, it was possible to derive a ground vibration equation. Using the equation, the characteristics of ground vibration could be investigated by analyzing the nomogram and predicting the Peak Particle Velocity (PPV), which are influenced by the delay time and the priming location. The trend of ground vibration change depending on the delay time was analyzed for the standards charges of 0.5, 1.6, 5, and 15 kg, which were suggested in "Blasting design and construction guidelines to road construction" by the Ministry of Land, Infrastructure and Transport. From the study, it would be possible to suggest a favorable vibration control method, which depends on the charge.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.73-82
• /
• 2014

PURPOSES : The purpose of this study is to determine the optimum addition rate of SBR latex through the evaluation of durability and strength of SBR latex applied soil pavement. Formerly used materials such as fly ash and cement in soil pavement had resulted in decreased durability due to micro crack by heat of hydration and shrinkage crack in winter. However, that agglutinated polymers help adhesion to aggregate increased comes up with preventing the crack opening when the number of capillary tubes of SBR latex get decreased in the hydration process of cement. Therefore, in this study, it is suggested that the evaluation of the field applicability of soil pavement be conducted through the performance lab test in terms of strength increment, adhesion improvement, and crack resistance based on SBR latex addition rate. METHODS : In order to evaluate the field applicability of soil pavement, SBR latex was added 0 to 3% by 1% increment, with fixed cement contents of 3% and 5%. The resistance of shear failure and crack of soil pavement were evaluated by performing the uniaxial compressive strength test and indirect tensile strength test at -20 and $20^{\circ}C$, respectively. RESULTSCONCLUSIONS : It was found out that from both tests, resistance of shear failure and crack were improved with increment of curing time, and especially more than 2% of SBR latex addition rate and 5% cement content gave better results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.36-54
• /
• 2017

The purpose of this paper is to develop a multi-sensor fusion-based traffic information acquisition system with robust to environmental changes. it combines the characteristics of each sensor and is more robust to the environmental changes than the video detector. Moreover, it is not affected by the time of day and night, and has less maintenance cost than the inductive-loop traffic detector. This is accomplished by synthesizing object tracking informations based on a radar, vehicle classification informations based on a video detector and reliable object detections of a infrared range finder. To prove the effectiveness of the proposed system, I conducted experiments for 6 hours over 5 days of the daytime and early evening on the pedestrian - accessible road. According to the experimental results, it has 88.7% classification accuracy and 95.5% vehicle detection rate. If the parameters of this system is optimized to adapt to the experimental environment changes, it is expected that it will contribute to the advancement of ITS.