• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.175-186
• /
• 2013

Based on Model Code 2010, flexural and residual strength, flexural toughness of SFRC with design strength of 60 MPa are evaluated. For comparisons, SFRC with design strength 40 MPa was tested. Distribution of steel fibers in crack surface of specimens was evaluated by visual inspection. The used steel fibers were hooked fibers with aspect ratio of 64, 67 and 80. In all specimens, mix ratio of steel fibers was 0.5% Vol. In results, only SFRC with the highest aspect ratio satisfied requirements specified in Model Code 2010. The results demonstrated that the use of high aspect ratio will provide enough flexural toughness for high strength concrete. Also, it is found that low slump of high strength concrete can help to enhance isotropic fiber distribution.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.65-73
• /
• 2000

The behavior of double angle connections is analyzed by 3D finite element method using ABAQUS(ver 5.8). Moment-rotation curves for the connections are generated, as well as stress distribution for angle and bolt. Double angle connections have various angle thickness, gage distance and number of bolt. Parameters, such as initial stiffness, plastic tiffness, reference load and curve shape parameter were obtained by regression method using Richard's formula. These parameter lead to predict nonlinear behavior of double angle connection. Design curves giving the parameters of the moment-rotation curves are generated. These parameters are primarily a function of the angle thickness, gage distance and the number of bolts in the connection. Using these parameters, connection moment and its ratio to the full plastic moment capacity Mp of the beam are calculated.

• Archives of Reconstructive Microsurgery
• /
• v.3 no.1
• /
• pp.81-89
• /
• 1994

Firstly the wrap-around free flap from the great toe was transferred successfully by Morrison and O'Brien in 1980 for reconstruction in chronic case of amputated thumb distal to the MP joint. Since then, significant bone peg resorption and grafted bone fracture have been reported in most of cases after operation. We have performed thumb reconstructions within 2 weeks after injury in 11 cases which included acute crushing injuries or failed replantation of thumb at Guro Hospital from September, 1983 to October, 1993. The results obtained from this study are as follows: 1. There were 8 males and 3 females and the mean age was 28.8 years old ranged from 3 years old to 50 years old. 2. The most common injury mechanism was machinary injury in 10 of 11 cases. 3. We have performed thumb reconstructions by using wrap-around free flap from the great toe without bone graft in 6 cases and with bone graft in 5 cases within 2 weeks after injury. 4. During 6 years and 1 month mean follow-up period, there were bone resorptions in 3, grafted bone fracture in 1, infections in 2 and soft tissue necrosis in 3 cases. 5. We obtained satisfactable results in respect of function and cosmesis and urged to use this flap for reconstruction in acute thumb injury.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.445-451
• /
• 2002

In this work, the adsorption characteristics and mechanical interfacial properties of treated silicas by silane coupling agents, such as, ${\gamma}$-methacryloxy propyl trimethoxy silane (MPS), ${\gamma}$-glycidoxy propyl trimethoxy silane (GPS), and ${\gamma}$-mercapto propyl trimethoxy silane (MCPS), were investigated. The equilibrium spreading pressure ($pi_e$), surface free energy ($gamma_s$ s/), and specific surface area ($S_{BET}$) were studied by the BET method with $N_2$/77 K adsorption. The developments of nonpolar functional groups of the silica surfaces treated by silane coupling agents led to the increase in the $S_{BET}$, $pi_e$, and $gamma_s$, resulting in the improved tearing energy ($G_{mc}$)of the silica/rubber composites. The composites treated by MPS showed the superior mechanical interfacial properties in these systems. These results explained by changing of crystalline size, dispersion, agglomerate, and surface functional group of silica/rubber composites.

• The Journal of the Korean dental association
• /
• v.48 no.3
• /
• pp.205-217
• /
• 2010

Purpose The aim of this study is to evaluate the survival rates and analyze the stability of lateral approach and trans-crestal approach for maxillary sinus floor elevation of simultaneous implant placement. Materials and method 407 patients who have been treated in LivingWell dental hospital between 2003 to 2009 were selected. Lateral window technique, osteotome technique and sinus drill technique were used for sinus floor elevation procedure. A total of 714 implants-MP-1 HA coated implant(Tapered Screw $Vent^{TM}$, $Spline^{TM}$, Zimmer, USA), FBR surfaced implant(Pitt-$Easy^{TM}$, Oraltronics, Germany)-were placed in grafted maxillary sinus simultaneously. The autogenous bone or a combination with the allograft or alloplast was grafted into sinus. Sinus floor elevation was combined with vertical/horizontal onlay bone grafts to reconstruct the defect of alveolar ridge. Results The average preoperative height of the maxillary alveolar bone was 5.78mm(range: 0.4mm~12.5mm). 14 implants failed during the healing period(lateral approach: 4, trans-crestal approach: 10) and 3 implant failed after prosthetic loading(lateral approach: 2, trans-crestal approach: 1). The cumulative survival rate of implants after 6 years was 97.6%. Trans-crestal approach(97.4%) and lateral approach(97.9%) had similar survival rates. Conclusion The results indicate that the trans-crestal approach and lateral approach for maxillary sinus elevation is a acceptable method at atrophic maxillary posterior area.

• Journal of Ginseng Research
• /
• v.20 no.3
• /
• pp.325-330
• /
• 1996

Dynamic parameters of physiology including embryo ratio (ER), embryo length to endosperm length, dry weight ratio between embryo and endosperm (DWR) and respiration rate (RR) in American send (Panax quinquefolium L.) seed were investigated. According to the changes of ER during seed stratification, the duration of embryo afterripening could be divided into three stages as \circled1 embryo slow growth stage (ESGS), ER increased from 7.31% to 20.48% (0.16% day-1): \circled2 embryo rapid growth stage (ERGS), ER increased to 80.98% (0.61% day-1) (75G5+ ERGS=morphological afterripening stage (MP,5)) and \circled3pysiological afterripening stage (PAS), ER Increased to 88.50% (0.094 day-1) only. DWR Increased slowly from 0.20% to 2.76clp (0.016% day-1) in MAS and rapidly to 8.81% (0.061% day-1) in PAS. The RR correlated significantly with ER as well (r=0.8934 > rot, 0.6610). The steep increment of both DWR and RR in PAS indicated that the PAS was not a static stage although the ER was not changed too much. All of these may provide some information for understanding the dormancy mechanisms of American sting seed.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.387-398
• /
• 2000

This study was aimed to observe the effect of Anterior J hook headgear on the craniofacial structures in mixed dentition with Class II malocclusion. The laterial cephalograms of 20 children treated by Anterior J hook headgear were traced, digitized and statistically analyzed. The results were as follows : 1. Forward growth of maxilla was inhibited. 2. Rotational effect of maxilla was not observed. 3. There was distal movement of maxillary dentition. 4. Maxillarly_dentoalveolar growth changes were more effective in anterior portion than posterior portion. 5. Mandible maintained a normal growth and mandibular plane angle was maintained during treatment period. 6. The ratio of anterior facial height to posterior facial height was almostly not changed.

• Journal of KIISE
• /
• v.42 no.5
• /
• pp.566-572
• /
• 2015

We proposed a novel energy optimization technique for smartphone GPUs, more aggressively lowering the GPU frequency while obtaining higher energy efficiency with a negligible negative impact on the GPU performance. In order to achieve the Quality of Service (QoS) specified by the smartphone application, the proposed optimization technique employed the minimal acceptable GPU frequency based on average Frames per Second (FPS) for each GPU frequency level. Our experimental results on a smartphone development board showed that the proposed technique can reduce the GPU energy consumption by up to 23% over the default DVFS algorithm with only a 0.45 frame drop.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.16 no.1
• /
• pp.94-99
• /
• 2003

Objectives : Gram-positive bacteria have became increasing resistant to antibacterial agents, and hence multi-drug-resistant bacterial pathogens are now a major problem in clinical medicine. There is, therefore, a need for new antibacterial agents. In the course of our screening program for potent antibacterial agent from medicinal plants, the extract of Salvia miltiorrhiza (S. miltiorrhiza) showed antibacterial activity against methcillin resistant Staphylococcus aureus (MRSA) and antibiotic-resistant S. aureus. Methods : S. miltiorrhiza was extracted with 80$\%$ EtOH. The extract was suspended in H2O and fractionated successively with hexane chloroform, ethyl acetate, and n-buthanol. The chloroform fraction, which showed the highest antibacterial activity(MICs, 78㎍/ml) against MRSA, was chromatographed on a silica gel column and recycling prep-LC to give the pure antibacterial component. Results and Conclusions : The second fraction among the chloroform soluble portion of an aqueous EtOH extract of S. miltiorrhiza root showed outstanding antibacterial activity against MRSA and antibiotic-resistant S. aureus compared to the other fraction. An active compound was isolated from the second fraction using silica gel column chromatoraphy and recycling prep-LC. Based on these data together with the IH-, 13C-NMR, mass and mp, the active compounds were identified tanshinone Ⅰ, dehydrotanshinone Ⅰ and cryptotanshinone. Among tanshinones, cryptotanshinone and dihydrotanshinone Ⅰ MICs against MRSA and antibiotics-resistant S. aureus were 12.5, 12.5 and 6.3㎍/ml, respectively.

• Journal of The Korean Astronomical Society
• /
• v.53 no.6
• /
• pp.161-168
• /
• 2020

We report the discovery of a giant exoplanet in the microlensing event OGLE-2017-BLG-1049, with a planet-host star mass ratio of q = 9.53 ± 0.39 × 10-3 and a caustic crossing feature in Korea Microlensing Telescope Network (KMTNet) observations. The caustic crossing feature yields an angular Einstein radius of θE = 0.52 ± 0.11 mas. However, the microlens parallax is not measured because the time scale of the event, tE ≃ 29 days, is too short. Thus, we perform a Bayesian analysis to estimate physical quantities of the lens system. We find that the lens system has a star with mass Mh = 0.55+0.36-0.29 M⊙ hosting a giant planet with Mp = 5.53+3.62-2.87 MJup, at a distance of DL = 5.67+1.11-1.52 kpc. The projected star-planet separation is a⊥ = 3.92+1.10-1.32 au. This means that the planet is located beyond the snow line of the host. The relative lens-source proper motion is μrel ~ 7 mas yr-1, thus the lens and source will be separated from each other within 10 years. After this, it will be possible to measure the flux of the host star with 30 meter class telescopes and to determine its mass.