• Korean journal of applied entomology
• /
• v.21 no.4 s.53
• /
• pp.200-206
• /
• 1982

A computer simulation model was constructed to explore the phonology of the Striped Rice Borer, Chilo suppressalis (Walker), in Korea. The phenological system model based on the concept of distributed time delay was written in the computer program 'INSECT' and simulated with the estimated parameters of the effective day-degrees (DEL) and the order of time delay (K) for determining the validity of the system model. The accumulated emergence curves obtained from the phenological model were slightly different from the observed light trap data at the early and late stage of the moth emergence in 1978. The differences between observed and simulated $50\%$ emergence date were five to six days in the locations of Suweon and Chuncheon, while it was only two to three days in Iri, Daegu, Boseong, and Milyang. The phenological model should be further improved for simulation of field population changes by adding the information of the time delay process in each developmental stage, the age distribution of overwintered population, and the limiting factors of the borer mortality.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.553-565
• /
• 2001

One-bottle adhesive system was recently developed in order to simplify the clinical skills and save chair time after continuous improvements on dentin bonding agents. To test the shear bond strength of a new "one-bottle adhesive" system to bovine dentin various commercially available one-bottle adhesives(Prime & Bond $2.1^{(R)}$, One Coat $Bond^{(R)}$, Syntac $Sprint^{(R)}$, Single $Bond^{(R)}$) were included for comparison. And we observe the interfacial morphology by scanning electron microscope. The results were as follows; 1. Group II (One Coat $Bond^{(R)}$) showed higher shear bond strength than group I (Prime & Bond $2.1^{(R)}$), group III(Syntac $Sprint^{(R)}$), and group IV(Single $Bond^{(R)}$), but no statistically significant difference was founded between groups(p>.05). 2. Relating reverse-cone shape resin tags were observed in samples of all groups under SEM. We could observed hybrid layer, resin tag and many lateral branches in every group. But, we observed in group III rare lateral branched than other three groups, and discontinuous hybrid layer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.566-574
• /
• 2001

For decades it has been a clinically accepted requirement, in case of salivary contamination, to re-etch conditioned enamel and dentin to proceed with the adhesive technique. Only a few reports have been so far dealing with the potential of one-bottle adhesive system to bond even when applied after salivary contamination and without re-etching. The purpose of this study was to evaluate the influence of the salivary contamination on the shear bond strength of dentin. The results were as follows: 1. In group II, in which saliva contamination and washing occurred before applying of Prime & Bond NT showed high shear bond strength as in control group. In Group III and IV, in which the cured adhesive was contaminated with saliva, showed significantly lower mean bond strength, 2. Relating long resin tags of $70\sim120{\mu}m$ were observed in samples of all groups under SEM. We could observed hybrid layer, resin tag and many lateral branches in every group. And there were no differences between groups.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.194-198
• /
• 2005

Growth curves of Listeria monocytogenes in modified surimi-based imitation crab (MIC) broth were obtained by measuring cell concentration in MIC broth at different culture conditions [initial cell numbers, $1.0{\times}10^{2},\;1.0{\times}10^{3}\;and\;1.0{\times}10^{4}$, colony forming unit (CFU)/mL; temperature, 15, 20, 25, 37, and $40^{\circ}C$] and applied to Gompertz model to determine microbial growth indicators, maximum specific growth rate constant (k), lag time (LT), and generation time (GT). Maximum specific growth rate of L. monocytogenes increased rapidly with increasing temperature and reached maximum at $37^{\circ}C$, whereas LT and GT decreased with increasing temperature and reached minimum at $37^{\circ}C$. Initial cell number had no effect on k, LT, and GT (p > 0.05). Polynomial and square root models were developed to express combined effects of temperature and initial cell number using Gauss-Newton Algorism. Relative coefficients of experimental k and predicted k of polynomial and square root models were 0.92 and 0.95, respectively, based on response surface model. Results indicate L. monocytogenes growth was mainly affected by temperature and square root model was more effective than polynomial model for growth prediction.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.976-982
• /
• 2016

Seaweed has high growth rate, low land usage, high CO₂ absorption and no competition for food resources. Therefore, the use of lignin-free seaweed as a raw material is arising as a third generation biomass for bioethanol production. Various pretreatment techniques have been introduced to enhance the overall hydrolysis yield, and can be categorized into physical, chemical, biological, enzymatic or a combination. Thermal acid hydrolysis pretreatment is one of the most popular methods to attain high sugar yields from seaweed biomass for economic reasons. At thermal acid hydrolysis conditions, the 3,6-anhydro-galactose (AHG) from biomass could be converted to 5-hydroxymethylfurfural (HMF), which might inhibit the cell growth and decrease ethanol production. AHG is prone to decomposition into HMF, due to its acid-labile character, and subsequently into weak acids such as levulinic acid and formic acid. These inhibitors can retard yeast growth and reduce ethanol productivity during fermentation. Thus, the carbohydrates in seaweed require effective treatment methods to obtain a high concentration of monosaccharides and a low concentration of inhibitor HMF for ethanol fermentation. The efficiency of bioethanol production from the seaweed biomass hydrolysate is assessed by separate hydrolysis and fermentation (SHF). To improve the efficiency of the ethanol fermentation of mixed monosaccharides, the adaptation of yeast to high concentration of sugar could make simultaneous utilization of mixed monosaccharides for the production of ethanol from seaweed.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.294-299
• /
• 2003

The seeds of naturally growing Heteropappus hispidus (Thunb.) were treated by nine different doses (0, 10, 20, 40, 80, 120, 160, 200, 300, 400 Gy) of gamma rays to investigate their germination rate and to quantity the characteristics of their germinated plants as like as leaf appearance and length, the formation rate of anthocyanin color in stem 30 days after germination, the formation rate of rosette leaf and multi-shoot, the flowering and seed-bearing, and shoot length. The germination rate at least up to 120Gy was not greatly affected but was rapidly decreased at over 160Gy. It seemed that lethal dose ($LD_{50}$) of germination was 160Gy. The leaf appearance and growth was also inhibited, but the formation rate of anthocyanin color in the flower stem was enhanced up to 30% with dose. The rosette plants were observed in plants irradiated with higher than 40Gy. Multi-shoots were developed over 80Gy. For a short shoot length and bundle of thin stem, it was considered that they can be selected as the potential pot flower plants, through genetic fixation. In particular, it was suggested that the formation of anthocyanin color in flower stem, rosette and multi-shoot plants induced by the high dose of gamma rays could be utilized as the morphological markers for the mutant selection of Heteropappus hispidus (Thunb.).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.184-191
• /
• 1989

The effect of various supplementary light sources on the agronomic characteristics has been investigeted for generation acceleration of barley in green house with the condition of 15$^{\circ}C$ and 8 hrs. day light followed by each supplementary light sources including incandescent electric lamp (IN), Blue fluorescent lamp(BF). day-light fluorescent lamp(DF), Biolux lamp(BL), BL+BF, In+BF and IN+BL. Leaf number of main stem, leaf area, culm length, dry matter yield of shoot, number of grain per spike, grain yield per plant were most sharply decreased with the exposition of IN, while flag-leaf emergence on main stem and I, 000 grain weight were earlist and heavist respectively with the exposition of IN. In appeared to be best light source for shortening the days to heading, but IN + BF will be most desirable light source with considering both days to heading and adequate yield at the same time.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.2
• /
• pp.97-104
• /
• 2010

This study evaluated the energy efficiency of a windows system using built-in blinds, with regard to their insulation performance and their blocking of solar radiation. The study took advantage of the "Physibel Voltra" program as a physical simulation of heat transfer. To simulate the "Physibel Voltra" program, I practiced a mock-up test to determine heating quality and translation condition. I analyzed the propensity to annual energy consumption, the annual quantity of heat transfer, and the annual cooling and heating cost through a computer simulation for one general household in an apartment building. In the test, it was found that compared to a general windows system, a windows system with built-in blinds reduced the annual heat transfer by 10% in cooling states and by 11% in heating states when the blind was up. When the blind was down, the windows system with built-in blinds reduced the annual heat transfer by 25% in cooling states and 30% in heating states. When a windows system with built-in blinds is compared with a general windows system, the quantity of cooling and heating loads is reduced by 283.3kw in cooling states and 76.3kw in heating states. This leads to a reduction in the required cooling and heating energy of 359.6kw per house. It is thus judged that the use of a windows system with built-in blinds is advantageous in terms of reducing greenhouse gas emissions, because the annual TOE (tons of oil equivalent) per house is reduced by 0.078TOE, while $tCO_2$ is reduced by $0.16tCO_2$. In addition, compared with a general windows system, the cost of cooling and heating loads in the system reduces the annual cooling cost by 100,000won, and the annual heating cost by 50,000won. Ultimately, this means that cooling and heating loads are cut by 150,000won per year.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.452-452
• /
• 2010

차세대 디스플레이로서 주목 받고 있는 유연성 정보표시 소자 개발에 대한 요구도가 날로 증대되고 있다. 유연성 정보표시 소자로서 플라스틱 기반 유연성 소자가 특히 주목 받고 있으나, 이의 실용화를 위해서는 플라스틱 기판에 적용 가능한 보호막 형성 기술 개발이 선행되어야 한다. 플라스틱 필름의 경우 높은 산소 및 수분 투과율 때문에 유연성 디스플레이의 응용에 걸림돌이 되고 있다. 플라스틱 기반 유연성 소자의 장수명화를 위해서는 수분과 산소의 투과를 방지하는 passivation layer 형성 기술이 필수적으로 요구된다. 본 연구에서는, polyethylene terephethalate (PET) 기판상에 증착된 $SiO_x$ 보호막의 합성에 있어서 중간층 유무에 따른 투습특성의 변화를 살펴보았다. 기화된 HMDSO (Hexamethyldisiloxane)와 Ar 및 $O_2$ 혼합기체를 이용하여 PECVD 방법으로 $SiO_x$ 박막을 합성하였다. 15 nm 두께의 $Al_2O_3$를 중간층으로 사용하여 중간층 유무에 따른 초기성장 거동 변화가 $SiO_x$ 박막의 투습 특성에 미치는 영향을 조사하였다. $SiO_x$ 박막 구조와 화학적 조성은 각각 FE-SEM과 FT-IR을 이용하여 분석하였으며, AFM을 이용하여 $SiO_x$ 박막 표면 미세 형상을 관찰하였다. 투습률은 MOCON사(社)의 Permatran-W 3/33 MA을 이용하여 측정하였다. 그리고 반복 굽힘 시험기를 이용하여 $SiO_x$ 보호막의 동적 투습 특성을 조사하였다. $Al_2O_3$ 중간층 유무에 따라 $SiO_x$ 박막의 투습률 (WVTR; water vapor transmission rate)은 ${\sim}10^{-1}g/m^2/day$(300 nm-thick $SiO_x$/PET)에서 ${\sim}5{\times}10^{-3}g/m^2/day$(300 nm-thick $SiO_x$/15 nm-thick $Al_2O_3$/PET)으로 변화하였다. 300 nm-thick $SiO_x$/15 nm-thick $Al_2O_3$/PET 시편의 경우 곡지름 50 mm에서 1,000회 반복 굽힘 후에도 투습률 변화를 보이지 않았다. 이와 같은 $SiO_x$ 박막의 투습 특성 변화는 $Al_2O_3$ 중간층 유무에 따른 초기 성장 거동의 변화로 해석된다. FE-SEM 및 AFM 표면 미세 구조 관찰을 통한 초기 성장 거동 변화 조사 결과, $Al_2O_3$ 중간층 없이 PET 기판위에 $SiO_x$ 박막 증착한 경우 3 차원 성장을 하는 반면, PET기판위에 $Al_2O_3$ 중간층 형성 후 $SiO_x$ 박막 증착하는 경우 2 차원 성장을 하게 됨을 관찰하였다. 따라서 본 연구를 통하여, 플라스틱 기반 유연성 표시 소자에 적용하기 위한 $SiO_x$ 보호막 합성 에 있어서 초기 성장 거동의 변화가 투습 특성에 민감한 영향을 미침을 알 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.250-250
• /
• 2013

단일벽 탄소나노튜브(Single-walled nanotubes, SWNTs)는 나노스케일의 크기와 우수한 물성으로 인하여, 전자, 에너지, 바이오 분야로의 응용이 기대되고 있다. 특히 SWNTs의 직경을 제어하게 되면 튜브의 전도성 제어가 훨씬 수월하게 되어, 차세대 나노전자소자의 실현을 앞당길 수 있으며 이러한 이유로 많은 연구들이 현재 행해지고 있다. SWNTs의 직경제어 합성을 위해서는 현재 열화학기상증착법(Thermal chemical vapor deposition; TCVD)이 가장 일반적으로 이용되고 있으며, 합성 촉매와 합성되는 튜브의 직경과의 크기 연관성이 알려진 후로는, 촉매의 크기를 제어하여 SWNTs의 직경을 제어하고자 하는 연구들이 활발하게 보고되고 있다. 특히, 촉매 나노입자의 직경이 1~2 nm 이하로 감소될 경우, SWNTs의 직경 분포가 어떻게 변화할 것인지가 최근 가장 중요한 관심사로 남아 있으나, 이러한 크기의 금속입자는 나노입자의 융점저하 현상이 발현되는 영역이므로, SWNTs의 합성온도 영역에서 촉매 금속입자는 반액체(Semi-liquid) 상태로 존재할 것으로 추측하고 있다. 본 연구에서는 고온의 SWNTs 합성환경에서 금속나노촉매의 유동성을 제한하기 위하여 나노사이즈의 기공이 규칙적으로 정렬된 다공성 물질인 제올라이트를 촉매담지체로 이용하였고, 이 때 다양한 합성변수가 SWNTs의 직경에 미치는 영향을 살펴보고자 하였다. SWNTs의 합성을 위해 실리콘 산화막 기판 위에 제올라이트를 도포한 후, 합성 촉매로서 전자빔증발법을 통하여 수 ${\AA}$에서 수 nm 두께의 철 박막을 증착하였다. 합성은 메탄을 원료가스로 하여 TCVD법으로 실시하였다. 주요변수로는 제올라이트 종류, 증착하는 철 박막의 두께, 합성온도를 설정하였으며, 이에 따라 합성된 SWNTs의 합성수율 및 직경분포의 변화를 체계적으로 살펴보았다. SWNTs의 전체적인 합성수율의 변화는 SEM 관찰결과를 이용하였으며, SWNTs의 직경은 AFM 관찰 및 Raman 스펙트럼의 분석에서 도출하였다. 실험결과, 제올라이트 종류에 따라서는 명확한 튜브직경 분포의 변화 없이 비교적 좁은 직경분포를 갖는 SWNTs가 합성되었으며, 합성온도가 $850^{\circ}C$ 이하로 감소되면 합성수율이 현저히 감소되는 것을 알 수 있었다. 촉매박막의 두께가 1 nm 이상인 경우에서는 직경 5 nm 전후의 나노입자가 형성되었으며, 이때 SWNTs의 합성수율은 높았으나 다양한 직경의 튜브가 합성이 된 것을 확인할 수 있었다. 반면, 촉매입자의 크기가 2 nm 이하에서는 합성수율은 다소 저하되었으나, SWNTs의 직경분포의 폭이 상대적으로 훨씬 좁아지는 것을 알 수 있었다. 추후, 극미세 촉매와 저온합성 환경에서의 합성수율 향상을 위한 합성공정의 개량이 지속적으로 요구된다.