• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.407-415
• /
• 2016

Recent wireless communication trends have emphasized the importance of energy-efficient transmission. In this paper, link adaptation with machine learning mechanism for maximum energy efficiency in multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM) wireless system is considered. For reflecting frequency-selective MIMO-OFDM channels, two-dimensional capacity(2D-CAP) feature space is proposed. In addition, machine-learning-based bit and power adaptation(ML-BPA) algorithm that performs classification-based link adaptation is presented. Simulation results show that 2D-CAP feature space can represent channel conditions accurately and bring noticeable improvement in link adaptation performance. Compared with other feature spaces, including ordered postprocessing signal-to-noise ratio(ordSNR) feature space, 2D-CAP has distinguished advantages in either efficiency performance or computational complexity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.1015-1018
• /
• 1998

Capsaicin(8-methyl-N-vanillyl-6-nonenamide: CAP) known well as a major compound of not taste in hot pepper, was investigated for the inhibition effect on in vitro nitrosation. CAP(100$\mu$mol) inhibited the formation of N-nitrosoproline(NPRO) and N-nitrosothioproline(NTPRO) by 56% and 26%, respectively. Vanillyl alcohol inhibited the nitrosation of proline by a concentration-dependent manner, and vanillic acid and vanillin were less effective in blocking the nitrosation of proline compared to CAP and anillyl alcohol. The inhibitory effect of NPRO formation by CAP was evaluated to similar with alpha-tocopherol, and vanillyl alcohol was more effective than alpha-tocopherol in blocking the nitrosation of proline. Our results suggested that CAP and its metabolites such as vanillyl alcohol could inhibit endogenous nitrosation in hydrophobic biological environment.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.117-124
• /
• 2018

Recently, the interest and consumption of mini watermelon (Citrullus lunatus Thunb.) are increasing due to nuclear family and one person household. However, there's no research for mini watermelon. Therefore, the purpose of the study is to develop standard cultivation method of mini watermelon. The test cultivar is 'Minimi', which is a small-sized fruit, the rootstock is 'Bullojangsaeng', which is a cucurbit line. Grafted plants were transplanted on April 5, 2017, and harvested in early July. Cultivated types were 3 methods, which are ${\cap}-form$, arched, and runner type, and plant spacing were 40, 60, and 80 cm, respectively. The rowth and yield in ${\cap}-form$ was higher than that of the arched and runner types, and the sugar content was higher a bit. The yield per unit area was about 50% higher than ${\cap}-form$, which can be plant density cultivation than that of the runner type. The number of seeds per fruit of 'Minimi' was similar to that of 'Sambokggul', but seed weight was one third lower than that of 'Sambokggul'. The content of lycopene was 30% higher than that of 'Sambokggul' watermelon, and the main sugar content is similar to or slightly less. In conclusion, the ${\cap}-form$ staking cultivation was superior to the runner type or arched cultivation in terms of fruit setting ratio, yield and quality.

• Journal of Korean Academy of Nursing
• /
• v.23 no.4
• /
• pp.631-648
• /
• 1993

This study is a descriptive study to provide basic data related to types of uniforms worn by nurses. Nurses, other medical center personnel, patients and their famillies were asked for their opinion on changing nurses’ uniforms and how the image of nurses is 1 elated to the type of uniform worn by the nurses. The data for this study were collected during the period from Feb. 25, 1993 to Mar. 26, 1993 at Y-University Medical Center from 132 nurses, 137 other medical center personnel, 117 patients and their families. The instruments used for this study were the Nurses’ Image Scale(NIS) developed by Bown(1986), and an instrument to measure opinions of uniform and cap using photographs of nurses’ uniforms that was developed by the researcher through a literture review. Data were analyzed using the SPPS / PC package, Statistics used for analysis were frequencies, percentages, paired t -test, and oneway ANOVA The results of this study are summarized as follows ; 1. Of the nurses, 84.3%, along with, 51.5% of the medical center personnel, 39.1% of the patients and their families agreed to a change in the color of nurses uniforms. 2. Similarly, 87.4% of the nurses,27.7% of the medical center personnel, 19.3% of the patients and their families were in favor of nurses not wearing caps. 3. Only 11.8% of nurses answered that a white uniform was important to the professional image of nursing. Only 2.4% of the nurses answered that a cap was very important to the professional image of nursing. 4. Only 1.6% of the nurses answered that a white uniform and cap were important to show the role of nurses in the twenty first century. 5. About 1/3, 36.5%, of the medical center personnel, the patient and their families answered that changing the color of the nurses' uniform will make a change in the image of nurses. 6. A White uniform and cap were seen as being im-portant in distinguishing nurses from other medical personnel in the hospital by 76.5% of the medical personnel, the patients and their families. 7. Nurses gave high marks to the idea of no cap regardless of the color of the uniform which would still portray the symbol of the nurses’ role, identity and would differentiate the role from other jobs. The patients and their families gave high marks to a white uniform with cap. 8. Generally, nurses, medical center personnel and patients and their families thought that a colored uniform with cap presented a good image of nurses. 9. There was a significant difference in the response among the three groups(F=24.65, P〈.001) to the figure in a white uniform with a cap, and the patients and their families thought it was the best portrayal of the image of nurses. There was a significant difference among the three groups(F=9.03, P〈.001) to the figure in a white uniform with no cap and the nurses indicated that it was the beat portrayed of the image of nurses. There was no significant difference among the three groups to the figure in a colored uniform with cap. There was a significant difference(F=17.50, P〈. 001) to the figure in a colored uniform with no cap, and the nurses indicated that it was the best portrayal of the image of nurses. In summary, the nurses wanted to change the color of uniform and not to wear a cap. But many of the medical center personnel, patients and their families indicated they did not agree with this idea. Therefore, changing the type of uniform worn by nurses should be done only after consideration has been given to the relation of the change to the professional role of nurses and the image of nurses held people in general. Suggestions arising from this study are as follows : 1. The relation between the role of nurses and their uniform was surveyed, and these results can be used as data when considering a change in uniforms. 2. A change in uniforms should be tried based on the norm established about uniforms. 3. The nurses did not want to wear a cap, but before a decision is definitely made it is necessary to study the philosophy related to the symbol of the cap because the figure of a nurse with a cap portrayed a positive image of the nurses. If the cap is kept, the symbol of the cap should be redefined. 4. In this study, only the image related to the uniform was examined, but in future studies it will be necessary to examine the practicality of various types of uniforms.

• KIEAE Journal
• /
• v.17 no.1
• /
• pp.63-68
• /
• 2017

Purpose: Various studies to solve the problem of increased energy consumption in the buildings are being carried out recently. Especially, the economic feasibility and insulation performance of the air-cap have been verified so that various studies regarding the reduction of building energy consumption have been carried out. However, previous studies regarding the air-cap were only carried out based on the verification of its insulation performance according to the size and attachment position of the air-cap. Therefore, the purpose of this study is to suggest a detachable air-cap module for improving the performance of the windows, evaluate the performance based on cooling, heating and light environments and verify its effectiveness through a real-scale testbed. Method: In this study, the energy saving performance in the circumstance where there is no attachment of an air-cap (Case 1), the circumstance where there is the attachment of air-cap on the glass surface of window (Case 2) and the circumstance where there is the attachment of an air-cap on the window frame (Case 3) were compared in order to verify the performance of the detachable air-cap module (Case 4), and the electricity consumption of cooling, heating and lighting equipment to maintain the appropriate indoor temperature and Illuminance for each case was calculated and utilized as indicators for the performance evaluation. Result: The result of this study is as follows. 1) In this study, the detachable air-cap module which was easily detachable through the principle of the magnet was suggested. 2) When Case 4 is applied, the electricity consumption of cooling and heating equipment can be reduced by 27.5%, 13.2% and 3.4% in comparison with Case 1, Case 2 and Case 3 respectively. 3) When the air-cap is applied to the window, the lighting energy consumption increases by 4 % in comparison to the non application of the air-cap, and this factor or aspect should be considered when applying the air-cap. 4) According to the performance evaluation result in consideration of cooling, heating and light environments, Case 4 demonstrates an energy saving ratio of 22.6%, 10.6% and 2.7% in comparison to Case 1, Case 2 and Case 3 respectively, indicating that it is effective for improving the performance of windows.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.3
• /
• pp.205-212
• /
• 2010

To better understand the physical processes that maintain the high-latitude lower thermospheric dynamics, we have identified relative contributions of the momentum forcing and the heating to the high-latitude lower thermospheric winds depending on the interplanetary magnetic field (IMF) and altitude. For this study, we performed a term analysis of the potential vorticity equation for the high-latitude neutral wind field in the lower thermosphere during the southern summertime for different IMF conditions, with the aid of the National Center for Atmospheric Research Thermosphere-Ionosphere Electrodynamics General Circulation Model (NCAR-TIEGCM). Difference potential vorticity forcing and heating terms, obtained by subtracting values with zero IMF from those with non-zero IMF, are influenced by the IMF conditions. The difference forcing is more significant for strong IMF $B_y$ condition than for strong IMF $B_z$ condition. For negative or positive $B_y$ conditions, the difference forcings in the polar cap are larger by a factor of about 2 than those in the auroral region. The difference heating is the most significant for negative IMF $B_z$ condition, and the difference heatings in the auroral region are larger by a factor of about 1.5 than those in the polar cap region. The magnitudes of the difference forcing and heating decrease rapidly with descending altitudes. It is confirmed that the contribution of the forcing to the high-latitude lower thermospheric dynamics is stronger than the contribution of the heating to it. Especially, it is obvious that the contribution of the forcing to the dynamics is much larger in the polar cap region than in the auroral region and at higher altitude than at lower altitude. It is evident that when $B_z$ is negative condition the contribution of the forcing is the lowest and the contribution of the heating is the highest among the different IMF conditions.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.2
• /
• pp.155-167
• /
• 2015

If of application of the deep deckting floor in long span more than 6m, the deflection caused by the construction load occurred high. Because the constructing-works and safety by this deflection, take actually supports to laborers working on the deck. However, installed supports are having difficultly such as the restricted passage, deficiency of working space, and lowering of efficiency. And toward-opening deck is seen as local buckling of web plate, flexural-torsional buckling, and gradually opening of corrugated decking. In this study, we will suggest a deep decking floor system that reinforced with both ends cap plates for toward-opneing decking change from opening to closing. The constructing deflection of a deep decking more than 6m must be satified 30mm and L/180 as proposed. Full-scale field tests loading by sand conducted a deep decking reinforced with and without cap plate. In conclusion, the specimen reinforced with cap plates have shown that to ensure the negative moment $wl^2/18$. And constructing-deflection of deep decking shown that to satisfy the evaluation value (L/180 or 30mm).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.383-399
• /
• 1998

Tooth development is usually described in four stages such as bud stage, cap stage, bell stage and crown stage. Exact time of appearance of tooth primordia is different among reports, and up to now there is no timetable regarding initial tooth development. To understand the congenital malformations and other disorders of the orofacial region, there is a need to establish a standard timetable on early tooth development. Till now, studies on the tooth development were mainly on later fetuses, and only few reports on early stage. Also, there were no reports on the time when bud stage turns to cap stage, and cap stage to bell stage. In this study, external morphology of face and the early development of the tooth, and transition of bud stage to cap stage, cap stage to bell stage were studied using 27 staged human embryos and 9 serially sectioned human fetuses. The results are as follows: 1. Mandibular region was formed by union of both mandibular arch at stage 15, and maxillary region by union of maxillary arch, medial nasal prominence, and intermaxillary segment at stage 19. 2. Ectodermal thickening which represents the primordia of tooth appeared in mandibular region at stage 13, and maxillary region at stage 15. 3. Bud stage began from mandibular primary central incisor at stage 17, and maxillary primary central incisor at stage 18. And the sequence of appearance was in the mandibular primary lateral incisor at stage 19, maxillary primary lateral incisor at stage 20, mandibular primary canine at stage 22, maxillary primary canine and primary first molar at stage 23, madibular primary first molar and maxillary primary second molar at 9th week, and mandibular primary second molar at 10th week of development. 4. Cap stage began from the primary anterior teeth at 9th week, and primary second molar still had the characteristics of cap stage at 12th week of development. 5. Transition to bell stage started from the primary anterior teeth at 12th week, and primary second molar started at 16th week of development. 6. Trnasition to crown stage started from primary anterior teeth at 16th week, and primary second molar at 26th week of development.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.176-183
• /
• 2001

A cavity stabilized Gunn oscillator at 24 GHz has been developed with WR-42 waveguide structure by HFSS simulation. The oscillator has been optimized by using a circular iris and cap resonator structure. This oscillator needs 4.5 V DC voltage / 1.2 A current and produces a maximum +21.27 dBm RF power at 24.0675 GHz.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.181-190
• /
• 2011

A precision measurement and digital image restoration of the 5th century's gilt bronze cap of Baekje dynasty, excavated from the ancient tomb of Andong, Goheung in 2006, was undertaken. The objective of the scanning is to preserve precise feature of the artefact in the form of digital data by embodying it in 3 dimensional space. Acquirement of the data has been undertaken in the following process : 3D scanning to obtain 3D shape and color information(original data photographing)-3D modelling(joining original data and restoring non-photographed or damaged area)-CG image production. Production of restoration CG image was based on joined shape of original data and each part's measurement on CAD. Non-photographed part and area of loss was restored referring actual measurement and research result of excavated cap from the 5th to 8th century. 3D image restoration is one of artefact restoration methods which restores artefact without risk. It is also undertaken with historical research. As result, this method can enhance aesthetic and academic value of the artefact by successful restoration.