• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2883-2889
• /
• 2012

LL-37 is the only antimicrobial peptide (AMP) of the human cathelicidin family. In addition to potent antimicrobial activity, LL-37 is known to have the potential to inhibit lipolysaccharide (LPS)-induced endotoxic effects. To provide the stability to proteolytic digestion and increase prokaryotic selectivity and/or anti-endotoxic activity of two Lys/Trp-substituted 19-meric antimicrobial peptides (a4-W1 and a4-W2) designed from IG-19 (residues 13-31 of LL-37), we synthesized the diastereomeric peptides (a4-W1-D and a4-W2-D) with D-amino acid substitution at positions 3, 7, 10, 13 and 17 of a4-W1 and a4-W2, respectively and the enantiomeric peptides (a4-W1-E and a4-W2-E) composed D-amino acids. The diastereomeric peptides exhibited the best prokaryotic selectivity and effective protease stability, but no or less anti-endotoxic activity. In contrast, the enantiomeric peptides had not only prokaryotic selectivity and anti-endotoxic activity but also protease stability. Our results suggest that the hydrophobicity and ${\alpha}$-helicity of the peptide is important for anti-endotoxic activity. In particular, the enantiomeric peptides showed potent anti-endotoxic and LPS-neutralizing activities comparable to that of LL-37. Taken together, both a4-W1-E and a4-W2-E holds promise as a template for the development of peptide antibiotics for the treatment of endotoxic shock and sepsis.

• Korean Journal of Mathematics
• /
• v.28 no.4
• /
• pp.907-913
• /
• 2020

Let R be a commutative ring with identity and let M be a w-module over R. Denote by ℱM the set of all w-submodules of M such that (M/N)w is w-cofinitely generated. Then it is shown that M is w-Artinian if and only if ℱM is closed under arbitrary intersections, if and only if ℱM satisfies the descending chain condition.

• Korean Journal of Agricultural Science
• /
• v.20 no.2
• /
• pp.167-180
• /
• 1993

Most of small size diesel engines are widely used with the same size and weight flywheel in the levels of 6.0kW and 7.5kW. This study was conducted to obtain basic data which affect the engine performance of the power tiller. The flywheel weight was considered as a major factor in this research. Basically, fuel consumption ratio, motoring loss, torque, vibration and mechanical efficiency of the engine were measured and analyzed on four levels of flywheel weight, 32.2, 29.4, 26.2 and $24.2kg_f$, respectively. Results were obtained as follows: 1. The weights of flywheel were $23.7kg_f$ from design program of JSME and $24.5kg_f$ from ASME and SAE design criteria. Therefore, the flywheel weight of $32.2kg_f$ might be reduced about $8kg_f$ in 7.5kW engine. 2. The rated outputs of 6.0kW and 7.5kW engine were actually 7.43kW and 7.85kW, respectively. When flywheel weight was reduced from $32.2kg_f$ to $24.2kg_f$, outputs were increased from 7.43kW to 7.70kW in 6.0kW engine and from 7.85kW to 8.25kW in 7.5kW engine. 3. When the flywheel weight was reduced from $32.2kg_f$ to $24.2kg_f$, fuel consumption ratio was decreased from 300.8 to 296.8g/kW-hr in 6.0kW engine and also from 313.6 to 312.8g/kW-hr in 7.5 kW engine, respectively. 4. When the flywheel weight was reduced from $32.2kg_f$ to $24.2kg_f$, mechanical efficiency of engine was increased from 76.1% to 76.8% in 6.0kW engine and also from 76.7% to 77.0% in 7.5kW engine, respectively. 5. When the flywheel weight was reduced from $32.2kg_f$ to $24.2kg_f$, vibration was decreased at X-axis and Z-axis in 6.0kW engine, however, slightly increased at Y-axis in 6.0kW engine and at all axes in 7.5kW engine. 6. When the flywheel weight was reduced from $32.2kg_f$ to $24.4kg_f$ motoring loss was decreased from 2.33kW to 1.75kW in 6.0kW engine and also from 2.46kW to 1.84kW in 7.5kW engine.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.741-751
• /
• 2010

We evaluated the nutritional value of a Monascus pilosus mycelial ethanolic extract (MEM) and culture filtrate (CFM) by determining the contents of monacolin K and citrinin, and by measuring antioxidant and antimicrobial activities. The yields of freeze-dried MEM and CFM powder were 4.02% and 3.35% of wet weight, respectively. Pigment content ($OD_{500}$ value) of MEM (0.79) and CFM (0.63) were lower than those of commercial rice beni-koji ethanolic extracts (EERB) (0.87), but were in good agreement with the L*, a*, and b* values and the hue angles of the products. The total monacolin K content of MEM (24.91 mg%) was higher than those of CFM (1.27 mg%) and EERB (14.65 mg%). However, the active monacolin K content of EERB (5.48 mg%) was higher than those of MEM (3.35 mg%) and CFM (0.4 mg%). Citrinin was not detected in any sample. The total polyphenol content of MEM (4.68%, w/w) was similar to that of CFM (4.29%, w/w), thus 13.75.20.94% higher than that of EERB. The total flavonoid content of EERB was 6.8.7.0-fold higher than those of MEM (0.64%, w/w) and CFM (0.66%, w/w). The total antioxidant capacity of CFM (3.51%, w/w) was 1.62.2.08-fold higher than those of MEM (2.74%, w/w) and EERB (1.69%, w/w). The electron-donating capacities of 1% (w/v) solutions of CFM, MEM, BHT, and EERB were 86.20%, 77.25%, 77.25%, and 44.82%, respectively, and the corresponding reducing powers ($OD_{700}$ values) were 2.1, 2.4, 1.1, and 1.6, respectively. SOD(superoxide dismutase)-like activities were in the order MEM (39.85%) > BHT (37.68%) > EERB (26.70%) > CFM (21.5%). Although the TBARS (% value) of MEM was a little lower than that of BHT, it was higher than those of CFM and EERB. The antibacterial activities of CFM acting on Bacillus brevis and Escherichia coli were somewhat higher than those of MEM, whereas the activities of MEM on Bacillus subtilis, Listeria monocytogenes, Staphylococcus aureus, Staphylococcus epidermidis, and Salmonella enteritidis were higher than those of CFM. However, the antibacterial activities of MEM and CFM were less than those of EERB and BHT. In conclusion, although further studies are needed, we offer experimental evidence that the by-products of M. pilosus MEM and CFM contain significant antioxidant and antimicrobial activities that may be useful in the development of healthy foods.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.753-759
• /
• 1999

The microstructure and electrical properties of ZNR that W $O_3$ is added in the range 0.5~4.0mol%, were investigated. The major part of W $O_3$ were segregated at the nodal point and W-rich phase was formed. Three crystalline phases, such as W-rich phase (W $O_3$), Bi-rich phase (B $i_2$W $O_{6}$ ), and spinel phase (Z $n_{2.33}$S $b_{0.67}$ $O_4$) were confirmed to be co-existed at the nodal point The average grain size increased in the range 15.5~29.9$\mu\textrm{m}$ with increasing W $O_3$ additive content. Consequently. W $O_3$ acted as a promotion additive of grain growth. As the W $O_3$ additive content increases. the varistor voltage and the nonlinear exponent decreased in the range 186.82~35.87V/mm and 20.90~3.34, respectively, and the leakage current increased in the range of 22.39~83.01 uh. With increasing W $O_3$ additive content, the barrier height and the density of interface states decreased in the range 1.93~0.43eV and (4.38~1.22)$\times$10$^{12}$ $\textrm{cm}^2$, respectively. W $O_3$ acted as an acceptor additive due to the donor concentration increasing in the range (1.06~0.38)$\times$10$^{18}$ /㎤with increasing W $O_3$ additive content.t.t.

• Journal of Information Technology Services
• /
• v.4 no.2
• /
• pp.47-59
• /
• 2005

S/W product line is a S/W product or a set of S/W system, which has common functions. We can develop a specific S/W product, which satisfiesrequirements of a particular market segment and a mission in a specific domain by reusing the core asset such as the developed S/W architecture through the S/W product line. S/W development methodology based on the S/W product line can develop a S/W more easily and fast by reusing the developed S/W core asset. An advanced country of S/W technology selects S/W product line as a core field of S/W production technology, and support technology development. In case of USA, CMU/SEI (Carnegie Mellon University / Software Engineering Institute) developed product-line framework 4.0 together with the industry and the Ministry of National Defense. Europe is supporting the development of product line technology through ITEA(IT for European Advancement) program. In this paper, we aim to construct reference architecture of S/W product line for production of the S/W product line.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.207-214
• /
• 2016

This study determined the effect of Lespedeza Caneata extract on the livers and kidneys of lead-administered mice. The experimental groups were divided into a normal group, Pb 4W group, Pb-LC 4W group, Pb 8W group, and Pb-LC 8W group. The normal group was supplied single distilled water, and the pb group was provided distilled water in which lead acetate was dissolved at 1,000 ppm. The Pb-LC group was provided with lead as drinking water, and the Lespedeza Caneata was orally medicated at a concentration of 500 mg/kg daily. AST, ALT, and BUN enzyme activities and histological experiments on the livers and kidneys resulted in the following conclusions. AST, ALT, and BUN activities increased in the experimental group compared to the normal group and decreased more in the Pb-LC group than the pb group during the same period. The histological results reveal that portions of the livers and kidneys were deformed in the Pb 4W group, and most of the Pb 8W group experienced necrosis and deformation. pb-LC4W and Pb-LC 8W groups experienced less deformation than the Pb 4W and Pb 8W groups. During the same period, the Pb-LC group experienced less histological changes than the Pb group. These results suggest that Lespedeza Caneata extract may have some protective effect on hepatic tissue and renal tissue damage with lead-administered in mice.

• Journal of the Korean Chemical Society
• /
• v.38 no.5
• /
• pp.359-365
• /
• 1994

The crystal stucture of hexapotassium undecahydrogen tetratungsto hexaantimonate(V) tetrahydrate has been determined from single crystal X-ray diffraction data. Crystal data are as follows: $K_6H_{12}[Sb_6W_4O_{36}]{\cdot}4H_2O$, Fw = 2360.62, tetragonal, I$4_1$/a, a = 10.799(1) ${\AA}$, c = 35.244(5) ${\AA}$, V = 4110.1(7) ${\AA}^3$, Z = 4, $D_x$ = 3.82 g$cm^{-3}$, $\mu(MoK\alpha)$ = 160.15 $cm^{-1}$, T = 293 K, final R = 0.0356 for 2400($F_0 > 3\sigma(F_0))$ independent reflections. The $[H_{12}Sb_6W_4O_{36}]^{-6}$ polyanion independently consists of one tungsten, two antimony, and nine oxygen atoms and belongs to the $\bar4(S_4)$ point group. This polyanion is formed by two open octahedra five membered ring of Sb(3)$O_6-W(1)O_6-Sb(2)O_6-W(1)O_6-Sb(3)O_6$ which is connected at right angle. The Sb-W, Sb-O, and W-O bond distances range from 3.2304(9) to 3.2403(5) $\AA$, 1.745(8) to 2.334(6) $\AA$, and 1.914(7) to 2.039(7) $\AA$, respectively.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.141-149
• /
• 1998

The W thin films were deposited on Si3N4 by a PECVD technique. The effects of substrate temperature and gas flow ratio on the properties of the W films were investigated. The deposition of W films were limited by surface reaction at the temperature range of 150>~$250^{\circ}C$, W films had the deposition rate of 150~530 $\AA$/min and stress of 0.85~$14.35\times10 ^9 \textrm {dynes/cm}^2}$ at various substrate temperatures and $SiH_4/WF_6$ flow ratios. $SiH_4/WF_6$ flow ratio affected the deposition rate and stress of the W films, expecially, excessive flow of SiH4 abruptly changed the structure, chemical bonding, and stress of the W films. Among the deposited W films on TiN, Ti, Mo, NiCr and Al adhesion layer, the one on the Al had the best adhesion property.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.131-140
• /
• 2005

The purpose of this study was to examine the ablation rate of Er: YAG laser irradiation on dentin and enamel and to observe the microscopic structures of cavities formed after ablation of enamel and dentin in using a bur and cavities formed after ablation using laser. Er:YAG laser irradiated at 200 mJ, 250mJ, 300mJ at the frequency of 20Hz, 15Hz. The following results were obtained : 1. The ablation rate of dentin groups at power of 3 W-6 W was about $1.103{\sim}2.639mm^3/sec$ and there were no significant differences between power of 4.5 W$\sim$6 W. 2. The ablation rate of enamel groups at power of 3 W-6 W was about $0.413{\sim}0.969mm^3/sec$ and there were no significant differences between power of 4 W$\sim$6 W. 3. With SEM examination of the cavity surface treated with the conventional high speed bur revealed relatively flat appearance almost covered with a debris like smear layer. 4. With SEM examination of the lased surface of dentin groups revealed no smear layer and no debris and openings of dentinal tubules were clearly opened. But the lased surfaces of the groups over 3 W were irregular and particles were loosely attached on it. 5. With SEM examination of the lased surface of enamel groups revealed severely destructed surface at the 6 W group and melting drop materials at the 3 W group. But the lased surface of 4 W group revealed clearly ablated surface. Therefore when cutting teeth using Er:YAG laser, the lasing power which can make effective ablation rate and minimize the thermal effect could be 3W at dentin and 4W at enamel. But, further studies and additional data collection will be necessary for appropriate lasing condition of Er:YAG laser.