목 적: Small interfering RNA (siRNA)를 이용하여 homeobox (HOXA) 10 유전자의 발현이 억제된 일차배양 자궁내막 세포를 이용하여 자궁내막 탈락막화 (decidualization)에 HOXA유전자를 포함한 세포 내 신호전달기전을 분석하고자 하였다. 연구방법: 본원 산부인과에서 자궁내막 질환 이외의 이유로 전자궁 적출술을 받은 환자의 자궁내막 조직을 채취한다. $37^{\circ}C$에서 20분간 Trypsin-EDTA를 처리하여 단일세포로 분리한 후 10% fetal bovine serum이 첨가된 DMEM/F12 배지를 이용하여 24시간 동안 $37^{\circ}C$ 5% $CO_2$ 배양기 안에서 배양한다. 배양된 자궁내막 세포를 HOXA10 siRNA로 첨가한 후 TGF-${\beta}1$을 10 ng/mL 농도로 48시간 첨가하여 탈락막화를 유도한다. 배양된 자궁내막 세포에서 reverse transcription polymerase chain reaction을 이용하여 HOXA10, prolactin, cyclooxygenase (COX)-2, peroxisome proliferator-activated receptor (PPAR)-$\gamma$ 및 wingless-type MMTV integration site family (Wnt)의 발현을 관찰하였다. 결 과: HOXA10의 경우 transforming growth factor (TGF)-${\bata}1$과 HOXA10 siRNA를 처리하지 않은 대조군에 비하여 TGF-${\beta}1$을 처리한 군에서 약 1.8배 가량 발현양의 증가를 보였다. 자궁내막 탈락막 표지인자로 알려져 있는 prolactin의 경우 TGF-${\beta}1$을 처리한 경우 대조군에 비하여 유의한 발현의 증가를 보였으며 HOXA10 siRNA를 처리한 군에 있어서는 TGF-${\beta}1$을 첨가하더라도 prolactin mRNA의 발현양의 증가를 관찰할 수 없었다. 또한 자궁내막 세포의 분화인자로 알려져 있는 COX-2의 발현 역시 HOXA10 siRNA를 처리한 군에 있어서 mRNA 발현양이 유의하게 감소하였으며 TGF-${\beta}1$을 처리하여도 발현의 증가를 관찰할 수 없었다. Wnt4의 경우 HOXA10 siRNA를 이용하여 HOXA10의 발현을 억제한 경우 대조군에 비하여 유의하게 mRNA의 발현양이 감소하였으며 이러한 발현양의 감소는 TGF-${\beta}1$을 처리하여도 증가됨을 관찰할 수 없었다. PPAR$\gamma$의 발현은 HOXA10 siRNA의 처리와 관계없이 TGF-${\beta}1$에 의하여 감소하는 것을 관찰할 수 있었다. 결 론: Progesterone에 의하여 자궁내막 상피세포에서 분비되는 것으로 알려져 있는 TGF-${\beta}1$에 의한 자궁내막 기질세포의 분화 (탈락막화)는 HOXA10 및 Wnt에 의하여 조절되는 것으로 생각된다.
Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).
The effect of Pre-cooled Turbojet Engine installation and nozzle exhaust jet on Hypersonic Turbojet EXperimental aircraft(HYTEX aircraft) were investigated by three-dimensional numerical analyses to obtain aerodynamic characteristics of the aircraft during its in-flight condition. First, simulations of wind tunnel experiment using small scale model of the aircraft with and without the rectangular duct reproducing engine was performed at M=5.1 condition in order to validate the calculation code. Here, good agreements with experimental data were obtained regarding centerline wall pressures on the aircraft and aerodynamic coefficients of forces and moments acting on the aircraft. Next, full scale integrated analysis of the aircraft and the engine were conducted for flight Mach numbers of M=5.0, 4.0, 3.5, 3.0, and 2.0. Increasing the angle of attack $\alpha$ of the aircraft in M=5.0 flight increased the mass flow rate of the air captured at the intake due to pre-compression effect of the nose shockwave, also increasing the thrust obtained at the engine plug nozzle. Sufficient thrust for acceleration were obtained at $\alpha=3$ and 5 degrees. Increase of flight Mach number at $\alpha=0$ degrees resulted in decrease of mass flow rate captured at the engine intake, and thus decrease in thrust at the nozzle. The thrust was sufficient for acceleration at M=3.5 and lower cases. Lift force on the aircraft was increased by the integration of engine on the aircraft for all varying angles of attack or flight Mach numbers. However, the slope of lift increase when increasing flight Mach number showed decrease as flight Mach number reach to M=5.0, due to the separation shockwave at the upper surface of the aircraft. Pitch moment of the aircraft was not affected by the installation of the engines for all angles of attack at M=5.0 condition. In low Mach number cases at $\alpha=0$ degrees, installation of the engines increased the pitch moment compared to no engine configuration. Installation of the engines increased the frictional drag on the aircraft, and its percentage to the total drag ranged between 30-50% for varying angle of attack in M=5.0 flight.
최근 낮은 기가비트급 광통신 집적회로의 구현에 sub-micron CMOS 공정이 적용되고 있다. 본 논문에서는 표준 0.35mm CMOS 공정을 이용하여 4채널 3.125Gb/s 차동 전치증폭기 어레이를 구현하였다. 설계한 각 채널의 전치증폭기는 차동구조로 regulated cascode (RGC) 설계 기법을 이용하였고, 액티브 인덕터를 이용한 인덕티브 피킹 기술을 이용하여 대역폭 확장을 하였다 Post-layout 시뮬레이션 결과, 각 채널 당 59.3dBW의 트랜스임피던스 이득, 0.5pF 기생 포토다이오드 캐패시턴스에 대해 2.450Hz의 -3dB 대역폭, 그리고 18.4pA/sqrt(Hz)의 평균 노이즈 전류 스펙트럼 밀도를 보였다. 전치증폭기 어레이의 공급전원은 단일전압 3.3V 이고, 전력소모는 92mw이다. 이는 4채널 RGC 전치증폭기 어레이가 저전력, 초고속 광인터컨넥트 분야에 적합함을 보여준다.
Wattanachant, C.;Dahlan, I.;Alimon, A.R.;Rajion, M.A.
Asian-Australasian Journal of Animal Sciences
/
제12권2호
/
pp.209-214
/
1999
Grazing preference, voluntary dry matter intake, stocking rate and digestibility of forage were investigated or sheep grazed in mature oil palm plantations in Malaysia. Dry matter intake (DMI) was estimated using the chromium sesquioxide marker method. The sheep were allowed to graze about 5 hours/day in oil palm plantations of age ranging from 9 to 21 years old. The crude protein, crude fibre and ash contents of selected herbage were 13.1 %; 24.6 %; and 8.3 %, respectively, while the gross energy (GE) and the metabolisable energy (ME) were 16.9 and 6.0 MJ/kg DM, respectively. Broad leaf plants and grasses were normally found in plantation of all ages. Legumes and oil palm seedlings formed the smallest group in the whole mixture. Fern content increased in older plantations. Legumes, oil palm seedlings, fern, broad leaves and grasses were 0.4, 1.3, 11.4, 28.0 and 59.0 %, respectively of total herbage. Grasses showed the highest preference index followed by broad leaf plants, legumes, oil palm seedlings and ferns in that order. The DMI and the metabolisable energy intake (MEI) of sheep at 6, 8, 10, 12 and 14 months of age were 64.8, 65.0, 65.3, 65.6 and 67.4 g/kg $W^{0.75}$ (p<0.05) and 0.39, 0.40, 0.40, 0.40 and 0.41 MJ/kg $W^{0.75}$, respectively. The average stocking rate was 4.3 sheep/ha. It was concluded that the performance of the sheep could be improved by increasing the daily grazing period and also by appropriate concentrate supplementation.
Robinia pseudoacacia var. umbraculifera, commonly called umbrella black locust were regenerated after co-cultivation of internode segments with Agrobacterium tumefaciens which included yeast cadmium factor 1 (YCF 1) gene. The tolerance to cadmium and lead for plants can be increased by the YCF1 gene expression. Moreover, the recent studies have shown that YCF1 gene transgenic plants increase the accumulation of cadmium and lead into plant vacuoles. The effect of plant growth regulator such as 2,4-dichlorophenoxyacetic acid (2,4-D), ${\alpha}$-naphthaleneacetic acid (NAA), 6-benzyladenine (BA), and thidiazuron (TDZ) were studied to evaluate the propagation of plants through internode explants. The efficient induction of multiple adventitious shoots and callus were observed on a medium supplemented with 0.1 mg/L TDZ + 0.2 mg/L BA. To induce shoot elongation and rooting, regenerated shoots were transferred into basal MS medium without any plant growth regulator. Successful Agrobacterium tumefaciens mediated transformation was obtained by 20 min vacuum-infiltration with $50{\mu}M$ acetosyringone on the optimal multiple shoot induction medium with 30 mg/L hygromycin and 300 mg/L cefotaxime. To confirm the integration and expression of transgene, Polymerase Chain Reaction (PCR) and Reverse Transcriptase PCR (RT-PCR) were performed with specific primers. The frequency of transformation was approximately 18.94%. This study can be used to genetic engineering of phytoremediator.
수중환경에서 운영되는 무기체계 획득을 위한 설계/개발을 진행하기 위해 수중음향채널 모델링 및 시뮬레이션을 통한 분석은 필수적이다. 일반적으로 수중음향채널 분석을 위해 사용되는 수중음향 전파 수치해석 모델은 음선이론 법, 정규방식 법, 포물선방정식 법, 파수적분 법이 있으나 다중 주파수 분석일 경우 유효성과 신호처리 및 분석에 제한적이다. 본 논문은 단일 및 다중 주파수 분석 및 신호처리 및 분석이 용이한 기존 의사 스펙트럼 시간영역 법 수중음향 수치해석 모델에 수중환경 소음 모델을 적용하여 실제 수중환경과 유사한 합성환경 수중음향채널을 모델링 하였다. 이렇게 구현된 합성환경 수중음향채널 모델의 유효성을 확인하기 위해 단일 주파수 신호 시나리오 4가지 다중 주파수 신호 시나리오 4가지 및 잠수함 기동에 따른 방사소음 분석 시나리오 시뮬레이션을 통해 의사 스펙트럼 시간영역 법 합성환경 수중음향채널 모델 유효성을 확인하였다.
Fusaro, Isa;Giammarco, Melania;Vaintrub, Michael Odintsov;Chincarini, Matteo;Manetta, Anna Chiara;Mammi, Ludovica M.E.;Palmonari, Alberto;Formigoni, Andrea;Vignola, Giorgio
Asian-Australasian Journal of Animal Sciences
/
제33권12호
/
pp.1991-1998
/
2020
Objective: This study aimed to evaluate and compare the effects of three different diets on the fatty acids (FA) profile and sensory properties of a characteristic Italian fresh cheese: Pecorino "Primo Sale" (PS). Methods: Fifty-four sheep were divided into three feeding groups: total mixed ration (TMR) enriched with extruded linseed (TL), control diet with TMR without any integration (TC), and pasture (P). During cheese production, six cheeses per experimental group were produced each week, stored for 10 days at 4℃, and then analyzed for chemical composition, FA profile, and sensory properties. Results: Saturated fatty acids (SFA) were significantly higher in PS from group TC (82.11%) than in cheese from other two groups (P 75.48% and TL 66.83%). TL and P groups presented higher values of polyunsaturated fatty acids, 4.35 and 3.65%, respectively, than that of TC group (2.31%). The lowest SFA/unsaturated fatty acid ratio was found in TL and P groups, while the highest was found in the TC group. Vaccenic acid and conjugated linoleic acid (CLA) were higher in group P (p<0.05) than in groups L and TC. Sensory properties of cheese from group P received the highest scores for odor intensity and friability, while control group had a greater chewing consistency. Overall, all cheeses received good scores for acceptability. Conclusion: In conclusion, this study showed how the integration of extruded linseed improved the FA profile of fresh pecorino cheese PS preserving its sensory properties. Levels of CLA in the PS group achieved using this approach was not higher than that in a grazing diet. Cheeses from groups P and L contained a higher value of FA, with nutritional implications for humans, when compared with un-supplemented diet. Linseed may be a good feeding strategy when pasture is not available.
최근 국내외적으로 육상과 해상에 대한 3차원 지리정보의 연계 활용이 가능한 통합시스템 구축을 위한 다양한 연구가 진행되고 있다. 육상에 대한 3차원 지리정보구축 작업은 항공 Lidar의 도입으로 인하여 높은 정확도로 넓은 지역의 위치정보 획득이 용이해짐에 따라 3차원 지형모델링에 관한 연구도 활발히 진행되고 있다. 또한 해상분야에서도 관련기관들이 해양지리정보체계(MGIS : Marine Geographic Information System) 구축과 활용을 위한 연안해역에 대한 각종 해양정보를 조사 및 측량하고 있다. 그러나 아직까지 육상과 해상에 대한 통합 지리정보시스템을 구축하기에는 육상과 해상의 좌표계와 기준면 등이 일치하지 않아 많은 어려움이 있다. 이에 본 연구에서는 항공 Lidar 자료와 멀티빔 음향측심(Multibeam Echo Sounder) 자료를 이용하여 육상과 해상에 대한 좌표계와 기준면을 일치시킨 후 통합 지형도를 제작하여 통합 지형공간정보를 구축하였다. 통합 지형공간정보 데이터에 대한 정확도 검증을 위하여 임의의 지점 10곳을 선정하여 분석한 결과 수심에 대한 RMSE가 0.46m로 IHO(국제수로기준 : International Hydrographic Organization)에서 규정하는 수심정확도 0.5m에 만족함을 알 수 있었다.
In this study, climate over Korea based on the Historical scenario induced by HadGEM2-AO is simulated by WRF. For this purpose, a system that can be used be for numerical integration over the Far East Asian area of the center of the Korean Peninsula with 12.5 km-horizontal resolution was set-up at "Haebit", the early portion of KMA Supercomputer Unit-3. Using the system, the downscaling experiments were conducted for the period 1979-2010. The simulated results of HadGEM2-AO and WRF are presented in terms of 2 m-temperature and precipitation during boreal summer and winter of Historical for the period 1981~2005, compared with observation. As for the mean 2 m-temperature, the general patterns of HadGEM2-AO and WRF are similar with observation although WRF showed lower values than observation due to the systematic bias. WRF reproduced a feature of the terrain-following characteristics reasonably well owing to the increased horizontal resolution. Both of the models simulated the observed precipitation pattern for DJF than JJA reasonably, while the rainfall over the Korean Peninsula in JJA is less than observation. HadGEM2-AO in DJF 2 m-temperature and JJA precipitation has warm and dry biases over the Korean Peninsula, respectively. WRF showed cold bias over JJA 2 m-temperature and wet bias over DJF precipitation. The larger bias in WRF was attributed to the addition of HadGEM2-AO's bias to WRF's systematic bias. Spatial correlation analysis revealed that HadGEM2-AO and WRF had above 0.8 correlation coefficients except for JJA precipitation. In the EOF analysis, both models results explained basically same phase changes and variation as observation. Despite the difference in mean and bias fields for both models, the variabilities of the two models were almost similar with observation in many respects, implying that the downscaled results can be effectively used for the study of regional climate around the Korean Peninsula.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.