• 제목/요약/키워드: 4M Integration

검색결과 354건 처리시간 0.023초

레이저 가공에 의한 비정질 실리콘 박막 태양전지 모듈 제조 (Laser patterning process for a-Si:H single junction module fabrication)

  • 이해석;어영주;이헌민;이돈희
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 추계학술대회 논문집
    • /
    • pp.281-284
    • /
    • 2007
  • Recently, we have developed p-i-n a-Si:H single junction thin film solar cells with RF (13.56MHz) plasma enhanced chemical vapor deposition (PECVD) system, and also successfully fabricated the mini modules ($>300cm^2$), using the laser patterning technique to form an integrated series connection. The efficiency of a mini module was 7.4% ($Area=305cm^2$, Isc=0.25A, Voc=14.74V, FF=62%). To fabricate large area modules, it is important to optimise the integrated series connection, without damaging the cell. We have newly installed the laser patterning equipment that consists of two different lasers, $SHG-YVO_4$ (${\lambda}=0.532{\mu}m$) and YAG (${\lambda}=1.064{\mu}m$). The mini-modules are formed through several scribed lines such as pattern-l (front TCO), pattern-2 (PV layers) and pattern-3 (BR/back contact). However, in the case of pattern-3, a high-energy part of laser shot damaged the textured surface of the front TCO, so that the resistance between the each cells decreases due to an incomplete isolation. In this study, the re-deposition of SnOx from the front TCO, Zn (BR layer) and Al (back contact) on the sidewalls of pattern-3 scribed lines was observed. Moreover, re-crystallization of a-Si:H layers due to thermal damage by laser patterning was evaluated. These cause an increase of a leakage current, result in a low efficiency of module. To optimize a-Si:H single junction thin film modules, a laser beam profile was changed, and its effect on isolation of scribed lines is discussed in this paper.

  • PDF

유전자총을 이용한 상추 내로의 배추 Glutathione Reductase (GR)유전자의 도입 (Transformation of Chinese Cabbage Glutathione Reductase (GR) gene into Lettuce (Lactuca sativa L.) with Particle Bombardment)

  • 정재동;이부자;이효신;김창길
    • 식물조직배양학회지
    • /
    • 제27권6호
    • /
    • pp.475-478
    • /
    • 2000
  • 상추에 particle bombardment를 이용한 배추 Glutathione Reductase (GR)유전자의 형질전환효율 향상 및 형질전환체의 유전분석에 관한 실험을 수행하여 얻은 결과를 요약하면 다음과 같다. Particle bombardment 이용시 사출 전 4시간, 사출 후 16시간 동안 삼투조절제인 0.6M serbitolfmannitol 을 처리하여 형질전환시킨 상추 자엽조직에서 GUS 반응 spot이 가장 많았다. 0.3, 0.6, 1.5 kbp로 나타나는 3가지 종류의 primer를 사용하여 PCR한 결과 각각의 primer에 homology를 타나내는 band를 확인하여 355 promoter와 BcGRl유전자가 삽입이 된 것을 확인하였다. 형질전환된 상추의 자식 종자를 채종하여 kanamycin 200mg/L이 첨가된 MS배지에 파종하여 형질전환시키지 않은 상추의 자식 종자와 비교해 본 결과, 형질전환된 상추의 종자에서 발아된 유묘의 약 70%정도가 kanamycin에 대해 내성을 나타내었다.

  • PDF

폴리머 링 공진기 기반의 가감필터 반사기와 반사형 반도체 광 증폭기가 하이브리드 집적된 파장 가변 레이저 (Hybrid-integrated Tunable Laser Using Polymer-ring Resonator-based Add/Drop Filter Reflector and Reflective Semiconductor Optical Amplifier)

  • 이호;김건우;정영철;김수현
    • 한국광학회지
    • /
    • 제20권4호
    • /
    • pp.217-222
    • /
    • 2009
  • 본 논문에서는 고굴절률차 폴리머 도파로를 이용하여 이중 링 공진기 가감필터(Add/Drop Filter) 반사기를 설계하고 제작하였다. 이 가감필터 반사기를 반사형 반도체 광 증폭기와 하이브리드 집적함으로써 저가형 파장가변 레이저를 제작하고 그 측정결과를 분석하였다. 이중 링 공진기 반사기는 서로 다른 반경을 가진 두 개의 링 공진기로 인하여 선택적인 반사 특성을 가지게 되며, 버니어 효과로 인하여 넓은 파장가변 특성을 가질 수 있다. 반사형 반도체 광 증폭기와 능동 정렬을 통하여 제작된 하이브리드 집적 파장가변 레이저는 26 dB의 부 모드 억제율과 0.03 nm의 선폭을 가지며 단일 모드로 발진하였다. 또한 25 mA의 전류를 이중 링 공진기 가감필터 반사기 상부에 형성된 전극에 인가하여 총 17 nm의 파장가변을 측정하였으며, 파장가변 과정에서 부 모드 억제율은 일정하게 유지됨을 확인하였다.

컴퓨터 제작 홀로그램과 데오도라이트를 이용한 인공위성 카메라 주 반사경의 정점 좌표 측정 (Measurement of Primary-mirror Vertex Coordinates for a Space Camera by Using a Computer-generated Hologram and a Theodolite)

  • 강혜은;송재봉;양호순;김학용
    • 한국광학회지
    • /
    • 제28권4호
    • /
    • pp.146-152
    • /
    • 2017
  • 우주용 인공위성 카메라를 구성하는 반사경의 정렬은 광학계의 고분해능, 고성능을 얻기 위한 중요한 과정 중 하나이다. 반사경들의 상호정렬에는 큐브미러(cube mirror)가 대신 사용되기 때문에, 각 반사경과 해당 큐브미러 간의 상호위치관계 정보가 우선 필요하다. 따라서 우주용 카메라 반사경들의 정렬을 위해 각 반사경의 정점과 해당 큐브미러의 상대 좌표값을 정확하게 측정해야하며, 본 논문에서는 컴퓨터 제작 홀로그램(computer-generated hologram, CGH)의 정렬용 세그먼트와 광섬유를 이용하는 새로운 측정 시스템을 제안함으로써 우주용 카메라를 구성하는 반사경의 정점을 요구조건 이내로 측정할 수 있었다. 측정 시스템은 광학계 평가용 간섭계, CGH, 광섬유, 반사경으로 구성되어 있으며, 최종적으로 데오도라이트를 이용해 큐브미러를 기준으로 주 반사경의 정점에 위치한 광섬유 끝단의 3차원 상대 좌표값을 $25{\mu}m$ 이하의 정밀도로 측정할 수 있었다.

내부 트리거 발생회로를 이용한 고속의 디지털 Maximum Selector 회로의 설계 (Development of A High-Speed Digital Maximum Selector Circuit With Internal Trigger-Signal Generator)

  • 윤명철
    • 대한전자공학회논문지SD
    • /
    • 제48권2호
    • /
    • pp.55-60
    • /
    • 2011
  • 그동안 신경망칩의 설계에는 주로 아날로그 Maximum Selector (MS) 회로를 사용하였다. 그러나 집적도가 높아질수록 아날로그 MS회로는 신호의 해상도(Resolution)을 높이는데 어려움이 있다. 반면 디지털 MS 회로는 높은 해상도를 얻기는 쉬우나 속도가 느린 단점이 있었다. 본 논문에서는 신경망칩의 디지털화에 사용하기 위한 MSIT(Maximum Selector with Internal Trigger-Signal) 라는 고속의 디지털 MS회로를 개발하였다. MSIT는 제어신호 발생기를 내장하여 안정적인 동작을 확보하고, 불필요한 대기시간을 없애도록 이를 최적화 함으로써 높은 속도를 얻을 수 있다. 1.2V-$0.13{\mu}m$ 프로세스의 모델파라메터를 사용하여 32 개의 10 비트 데이터에 대하여 시뮬레이션을 수행한 결과 3.4ns의 응답시간을 얻을 수 있었다. 이는 동급의 해상도를 갖는 아날로그 MS회로 보다 훨씬 빠른 속도로써, MSIT와 같은 디지털 MS 회로가 아날로그 MS회로에 비하여 높은 해상도와 빠른 속도를 구현할 수 있음을 보여준다.

GSM/CDMA 대역용 LTCC Diplexer설계 및 제작 (Design and Fabrication of a LTCC Diplexer for GSM/CDMA Applications)

  • 김태완;이영철
    • 한국정보통신학회논문지
    • /
    • 제13권7호
    • /
    • pp.1267-1271
    • /
    • 2009
  • 본 논문에서는 LTCC 다층회로 기술을 이용하여 GSM과 CDMA 대역을 분리 하는 diplexer를 설계 및 제작하여 그 특성을 측정하였다. Diplexer의 집적도를 높이가 위해 3차원 적층형 인덕터와 커패시터를 이용하여 유전율 7이고, 총 6층의 LTCC 기판에 설계되었다. 저역통과 필터에 인덕터와 고역통과 필터에 커패시터를 각각 병렬로 결합하여 두 대역의 주파수 대역의 선택성을 높였다. LTCC표준 공정으로 제작되어진 다이플렉서의 크기는CPW pad를 포함하여 3,450 ${\times}$4,000 ${\times}$694 ${\mu}$m3이다. GSM 대역에서 -1.35 dB 이하의 삽입 손실과 -5.66 dB 이상의 반사 손실, 그리고 CDMA 대역에서는 -1.54 dB 이하의 삽입 손실과 -9.30 dB 이상의 반사 손실의 특성을 나타내었다.

Application of Urban Computing to Explore Living Environment Characteristics in Seoul : Integration of S-Dot Sensor and Urban Data

  • Daehwan Kim;Woomin Nam;Keon Chul Park
    • 인터넷정보학회논문지
    • /
    • 제24권4호
    • /
    • pp.65-76
    • /
    • 2023
  • This paper identifies the aspects of living environment elements (PM2.5, PM10, Noise) throughout Seoul and the urban characteristics that affect them by utilizing the big data of the S-Dot sensors in Seoul, which has recently become a hot topic. In other words, it proposes a big data based urban computing research methodology and research direction to confirm the relationship between urban characteristics and living environments that directly affect citizens. The temporal range is from 2020 to 2021, which is the available range of time series data for S-Dot sensors, and the spatial range is throughout Seoul by 500mX500m GRID. First of all, as part of analyzing specific living environment patterns, simple trends through EDA are identified, and cluster analysis is conducted based on the trends. After that, in order to derive specific urban planning factors of each cluster, basic statistical analysis such as ANOVA, OLS and MNL analysis were conducted to confirm more specific characteristics. As a result of this study, cluster patterns of environment elements(PM2.5, PM10, Noise) and urban factors that affect them are identified, and there are areas with relatively high or low long-term living environment values compared to other regions. The results of this study are believed to be a reference for urban planning management measures for vulnerable areas of living environment, and it is expected to be an exploratory study that can provide directions to urban computing field, especially related to environmental data in the future.

교통 시뮬레이션과 공간 모델링 기법을 적용한 실시간 소음 시뮬레이션 통합 모델에 대한 연구 (The Study for the Realtime Noise Simulation Integration Model Applied to Traffic Simulation and Spatial Modeling)

  • 강태욱;조윤호;김인태
    • 한국도로학회논문집
    • /
    • 제13권3호
    • /
    • pp.111-119
    • /
    • 2011
  • 본 연구에서는 실시간으로 개별 차량에 대한 소음 예측 시뮬레이션을 통해 매 순간 소음지도와 Lmax, Lmin 등을 얻을 수 있는 소음 예측 모델을 제시하였다. GIS 지형처리 기법을 이용해 공간 모델 처리 기법을 바탕으로 실시간 교통소음예측 시스템 모델을 제안하고, 객체지향기법을 이용해 개발하였다. 실시간 소음 시뮬레이션 모델을 이용하여 교통 흐름의 변화에 따라 소음레벨, 소음지도 변화, Lmin, Lmax값을 한눈에 파악하거나 비교할 수 있다. 현장에서 수행한 소음측정치와 예측치를 비교한 결과, 대부분 거리에서 Leq는 2~3db, Lmax는 3~4db 이내의 차이를 나타내어 소음예측의 신뢰성이 양호함을 확인할 수 있었다. 개발된 시스템을 이용해 민감도 분석을 수행한 결과, 대형차 비율, 차량 속도, 방음벽 높이에 따라 소음레벨의 차이를 보였고, 특히 방음벽 높이는 Leq나 Lmin보다 Lmax에 큰 영향을 미치는 것을 알 수 있었다.

Studies on the Construction of Mutant Diversity Pool (MDP) lines, and their Genomic Characterization in Soybean

  • Dong-Gun Kim;Sang Hoon Kim;Chang-Hyu Bae;Soon-Jae Kwon
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2021년도 춘계학술대회
    • /
    • pp.9-9
    • /
    • 2021
  • Mutation breeding is useful for improving agronomic characteristics of various crops. In this study, we constructed soybean Mutant Diversity Pool (MDP) from 1,695 gamma-irradiated mutants through two selection phases over M1 to M12 generations; we selected 523 mutant lines exhibiting at least 30% superior agricultural characteristics, and, second, we eliminated redundant morphological phenotypes in the M12 generation. Finally, we constructed 208 MDP lines and investigated 11 agronomic traits. We then assessed the genetic diversity and inter-relationships of these MDP lines using target region amplification polymorphism (TRAP) markers. Among the different TRAP primer combinations, polymorphism levels and PIC values averaged 59.71% and 0.15, respectively. Dendrogram and population structure analyses divided the MDP lines into four major groups. According to an analysis of AMOVA, the percentage of inter-population variation among mutants was 11.320 (20.6%), whereas mutant inter-population variation ranged from 0.231 (0.4%) to 14.324 (26.1%). Overall, the genetic similarity of each cultivar and its mutants were higher than within other mutant populations. In an analysis of the genome-wide association study (GWAS) using based on the genotyping-by-sequencing (GBS), we detected 66 SNPs located on 13 different chromosomes were found to be highly associated with four agronomic traits: days of flowering (33 SNPs), flower color (16 SNPs), node number (6 SNPs), and seed coat color (11 SNPs). These results are consistent with those previously reported for other genetic resource populations, including natural accessions and recombinant inbred line. Our observations suggest that genomic changes in mutant individuals induced by gamma rays occurred at the same loci as those of natural soybean population. This study has demonstrated that the integration of GBS and GWAS can serve as a powerful complementary approach to gamma-ray mutation for the dissection of complex traits in soybean.

  • PDF

$No_3$-수준이 Oxidative Pentose Phosphate Pathway와 질산동화작용 효소"Nitrate Reductase, Nitrite Reductase, Glutamine Synthetase$_1$" 및 암모늄재동화작용 주요효소"Glutamine Synthetase$_2$"활성도의 상호관계에 미치는 영향 (Interactions between Oxidative Pentose Phosphate Pathway and Enzymes of Nitrate Assimilation "Nitrate Reductase, Nitrite Reductase, Glutamine Synthetase$_1$" and Ammonium Reassimilation "Glutamine Synthetase$_2$" as affected by $No_3$-Concentration)

  • 손상목
    • 한국작물학회지
    • /
    • 제37권5호
    • /
    • pp.468-475
    • /
    • 1992
  • 질소시비수준이 Oxidative Pentose Phosphate Pathway (OPPP)와 Nitrate Rdeuctase (NR), Nitrite Rdeuctase(NiR), Glutamine Synthetase$_1$(GS$_1$) 및 Glutamine Synthetase$_2$(GS$_2$) 활성도의 상호관계에 미치는 영향을 구명하기 위해 암조건하에서 6일간 생육시킨 완두의 부위별 또는 crude extract와 순수분리 한 plastid 별 효소 활성도를 분석 검토한 결과, 1. NR의 root부위의 생체 1g당 활성도와 단백질 1mg당 활성도, NiR의 root 및 shoot부위의 생체 1g 당 활성도는 거의 비슷한 반응을 나타내 NO$_3$$^{-}$ 처리농도가 증가할수록 급격히 증가하여 생체 1g당 NR 활성도, NiR의 root 및 shoot부위의 생체 1g당 활성도는 5mM에서, NR의 단백질 1mg당 NR 활성도는 10mM에서 각각 그 최고치에 각각 도달하였다가, 이후 시비수준이 증가할수록 저하하여 50mM 처리구에서는 무처리구와 비슷한 수준을 나타냈다. 2. NR의 shoot부위의 생체 1g당 활성도와 단백질 1mg 당 활성도, NiR의 root 및 shoot부위의 단백질 1mg당 활성도는 시비수준이 증가할수록 그 활성도가 induction되었으며, NR의 생체 1g당 활성도는 50mM에서 무처리구에 비해 4.8배, 단백질 1mg 당 활성도는 25mM 처리구에서 무처리구에 비해 5.0배까지 상승하였다. 3. Crude extract의 총 GS specific activity가 plastids의 GS$_2$ specific activity에 비해 월등히 많았으며, crude extract의 총 GS specific activity 대 plastids의 GS$_2$ specific activity의 비율은 뿌리의 3.0-4.3에 비해 shoot는 3.2-10.6으로 Shoot에서 NO$_3$$^{-}$ 처리농도에 따라 활성도비율의 차이가 더 컸다. 4. 고수준의 NO$_3$$^{-}$ 처리구에서 과다한 NO$_3$$^{-}$ influx에 의한 NR, NiR, GS$_1$, GS$_2$, 등의 효소활성도가 억제되었다. 5. OPPP만을 통해서도 식물체내의 NO$_3$$^{-}$의 환원이나 동화를 위한 NR, NiR, GS$_1$, GS$_2$ 활성도의 발현에 필요한 환원제와 ATP 충분히 공급될수 있었다.

  • PDF