• Journal of Powder Materials
• /
• v.11 no.4
• /
• pp.333-340
• /
• 2004

In this study, tantalum powder has been producted by MR-EMR combination process. MR-EMR combination process is a method that is able to improve demerits of MR(metallothermic reduction) and EMR(electronically mediated reaction) process. This study examined the characteristics of powder with the amount of reductant excess using $K_2$TaF$_{7}$ as feed materials, Na as a reductant and KCl/KF as a diluent. In addition, this study examined acid treatment that affect the high purification of powder. The impurities contained in powder was removed in various conditions of acid treatment. The total charge passed through external circuit and average particle size(FSSS) were increased with increasing amount of sodium excess. The proportion of fine particle(-325mesh) was decreased with increasing amount of sodium excess. The yield was improved from 70％ to 76% with increasing amount of sodium excess. Considering the impurities, charge, morphology, particle size and yield, an amount of sodium excess of 10wt% were found to be optimum conditions for MR-EMR combination process.s.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.153-161
• /
• 2006

Micro-forming is a suited technology to manufacture very small metallic parts(several $mm{\sim}{\mu}m$). Micro-forming of $Zr_{62}Cu_{17}Ni_{13}Al_8$ bulk metallic glass(BMG) as a candidate material for this developing process are feasible at a relatively low stress in the supercooled liquid state without any crystallization during hot deformation. In this study, micro- formability of a representative bulk metallic glass, $Zr_{62}Cu_{17}Ni_{13}Al_8$. was investigated for micro-forging of U-shape pattern. Micro-formability was estimated by comparing $R_f$ values ($=A_f/A_g$), where $A_g$ is cross-sectional area of U groove, and $A_f$ the filled area by material. Micro-forging process was simulated and analyzed by applying finite element method. FEM simulation results showed reasonable agreement with the experimental results when the material properties and simulation conditions such as top die speed, remeshing criteria and boundary conditions were tightly controlled. The micro-formability of $Zr_{62}Cu_{17}Ni_{13}Al_8$ was increased with increasing load and time in the temperature range of the supercooled liquid state. Also, FEM simulation using a commercial software, DEFORM was confirmed to be applicable for the optimization of micro-forming process.

• Journal of The Korean Association For Science Education
• /
• v.11 no.1
• /
• pp.51-57
• /
• 1991

This study pursued to find out the degree to which educational objectives are pursued in the 3rd and 5th grade science instructional of an elementary school. Twenty science instruional hours are observed during two month from May to July, 1989. Klopfer's science educational objectives system is used as the tool of objective analysis. Questionnaires for the ideal proportions of the educational objectives are answered by the professors and elementary school teachers. The writers regarded those results as the ideal proportions of the educational objectives. Results from the analysis of the instruction are as follows : 1. Results from analysis of the instruction in the third grade are as follows : knowledge and comprehension (A. 0) objectives are found to be pursued. about 40%. scientific inquiry process(B. 0-E. 0) objectives, about 29%, application of scientific knowledge and methods(F. 0) objectives. about 10%, manual skills(G. 0) objectives, about 11%, scientific attitudes and interests(H. 0) objectives, about 10% and orientation(I. 0) objectives is not pursued. 2. Results from analysis of the instruction in the fifth grade are as follows: knowledge and comprehension(A. 0) objectives are found to be pursued. about 31%, scientific inquiry process (B. 0-E. 0) objectives. about 38%, application of scientific knowledge and methods (F. 0) objectives, about 13%, manual skills(G. 0) objectives, about 7%, scientific attitudes and interests(H. 0) objectives, about 10%. 3. Results from the ideal proportions are as follows : Knowledge and comprehension(A. 0) objectives, 20.5%, scientific inquiry process(B. 0-E. 0) objectives, 46.5%, application of scientific knowledge and methods(F. 0) objectives. 8%, manual skills(G. 0) objectives. 9.5%, scientific attitudes and interests (H. 0) objectives, 9% and orientation(I. 0) objectives, 6.5%. 4. "You ideality index" is 29 in the third grade and 23 in the fifth grade. Science instruction of the fifth grade can be interpreted to be nearer to the ideal instruction in terms of educational objectives.

• Anxiety and mood
• /
• v.15 no.2
• /
• pp.68-76
• /
• 2019

Objective : The goal of this study was to investigate the characteristics of early maladaptive schemas (EMSs), and associated neurocognitive functions as seen in visitors for military designation process. Methods : This retrospective study included 111 males aged 18 to 24 years among three groups: 41 visitors for military designation process (VMD), 21 patients with obsessive-compulsive disorder (OCD), and 49 healthy subjects. We collected the results of the Young Schema Questionnaire, Symptom Checklist-90-Revised, three neurocognitive tests as well as their clinicodemographic data. We analyzed the differences in EMSs between these three groups, and the correlations among the identified EMSs and neurocognitive performances within the VMD group. Results : Compared with both the OCD and healthy groups, the evaluation of the VMD group showed significantly higher scores in mistrust/abuse (F=6.4, p=0.002), vulnerability to harm (F=6.6, p<0.0001) and negativity/pessimism schema (F=7.3, p<0.0001), even when controlling for depression scores and levels of education. These three schemas also exhibited significant negative correlations with the score of Stroop test with r ranging from -0.34 to -0.44. Conclusion : These findings suggest that people who are likely to have difficulties adjusting to living in a military life may have psychological vulnerabilities related to certain EMSs. Further studies are warranted to test the clinical potentials of these findings, such as a treatment target and a predictor factor.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2007-2013
• /
• 2017

In order to give hydrophobic surface properties on carbon steel, the fluorinated amorphous carbon films were prepared by using linear 2.45GHz microwave PECVD device. Two different process approaches have been tested. One is direct deposition of a-C:H:F films using admixture of $Ar/CH_4/CF_4$ working gases and the other is surface treatment using $CF_4$ plasma after deposition of a-C:H film with $Ar/CH_4$ binary gas system. $Ar/CF_4$ plasma treated surface with high $CF_4$ gas ratio shows best hydrophobicity and durability of hydrophobicity. Nanometer scale surface roughness seems one of the most important factors for hydrophobicity within our experimental conditions. The properties of a-C:H:F films and $CF_4$ plasma treated a-C:H films were investigated in terms of surface roughness, hardness, microstructure, chemical bonding, atomic bonding structure between carbon and fluorine, adhesion and water contact angle by using atomic force microscopy (AFM), nano-indentation, Raman analysis and X-ray photoelectron spectroscopy (XPS).

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.8-12
• /
• 2010

Purpose: In $^{18}F$-FDG automated synthesizer, deliver is done in automated mode after synthesis until the dispenser. After the delivery, the yield is calculated from the radioactivity which was read by the dose calibrator located in the dispenser. However, when the distance between the automated synthesizer and the dispenser is far, there are $^{18}F$-FDG residues, which results in loss of the amount of $^{18}F$-FDG. This study investigated the usefulness of a method that minimizes $^{18}F$-FDG residues. Materials and Methods: The structure of the tubing between the (TRACERlab Mx FDG; GE.) and the dispenser is that the distance is 8 m and the internal diameter is 1/16 inch. The synthesis process of The module goes through the synthesis process of trap, synthesis, delivery in the automated module. The time taken for synthesis is about 25 to 26 minutes, after which rinsing is done. However, after rinsing, as the distance of the tubing increased, there were 10~13% of $^{18}F$-FDG residues. Therefore, a method of using push syringe and $N_2$ gas in manual mode to minimize $^{18}F$-FDG residues is analyzed. Results: In manual mode, there were $^{18}F$-FDG residues of 4~5% for the push syringe, and there were $^{18}F$-FDG residues of less than 1% for the $N_2$ gas, which showed that the method using $N_2$ gas had superior usefulness. Also, there were no $^{18}F$-FDG residues in the cleaning the next day. Conclusion: The distance between the synthesizer and the dispenser needs to be reduced as much as possible, to reduce the rate of loss of $^{18}F$-FDG resulting from the distance of the tubing. However, in case the distance between the synthesizer and the dispenser has to be increased due to the system structure, using push syringe and $N_2$ gas simultaneously is a useful method for minimizing $^{18}F$-FDG residues.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.26-33
• /
• 2010

This paper presents a multi-channel capacitive touch sensing unit for SoC applications. This unit includes a simple common processing unit and switch array to detect the touch sensing input by capacitive-time(C-T) conversion method. This touch sensor ASIC is designed based on the Capacitive-Time(C-T) conversion method to have advantages of small current and chip area, and the minimum resolution of the unit is 41 fF per count with the built-in sensing oscillator, LDO regulator and $I^2C$ for no additional external components. This unit is implemented in 0.18 um CMOS process with dual supply voltage of 1.8 V and 3.3 V. The total power consumption of the unit is 60 uA and the area is 0.26 $mm^2$.

• Korean Journal of Organic Agriculture
• /
• v.6 no.1
• /
• pp.63-75
• /
• 1997

This study aims to find out the devices to minimize the amount of nitrate ingested from kimchi, the main way of vegetable intake for Koreans, and the basic data to deliver to calculate the total daily intake for Korean, investigating the year-round changes of nitrate content in vegetables for Kimche raw material, and changes of nitrate content by salting of chinese cabbage, and stewed kimchi through the use of different cooking methods. The results obtained were summarized as follow: over between 205-6655mg/kg f.w. in chinese cabbage, 480-3970mg/kg f.w. in chinese radish, 157-5820mg/kg f.w. in lettuce and 29-520mg/kg f.w. in cucumber respectively. Therefore it was strongly adviced to introduce the nitrate limit value of vegetables in Korea if the nitrate content in Kimchi should be reduced to meet the nitrate ADI(Acceptable Daily Intake, 219mg60kg b.w) of FAO.WHO, because the nitrate content in Kimchi reflects the nitrate content in vegetables. In order to keep the low nitrate content in Kimchi. it was adviced to remove the outer leaf which contains 2-3 times higher nitrate content compare to the inner leaf at the time of preparation, i.e. chinese cabbage, before the soaking treatment in salt solution for Kimchi making process. The dehydration by soaking treatment in salt solution occurred at 0.9%~4.7% in leaf midrib and more than 13%~24% in leaf blade. The nitrate content after soaking in salt solution was increased 107%~123% compared with before soaking, increasing rates of nitrate content in the outer and inner leaf midrib were higher than those in leaf blade. The increase of nitrate content in salt solution after soaking due to the dehydration of chinese cabbage by soaking treatment. The Kimchi stew(Kimchi JJige) was processed with and without animal oil, but the amount of nitrate in kimchi stew did not decrease both treatments, but it increased after the processing since the water in Kimchi stew has got low by boiling.

• Steel and Composite Structures
• /
• v.37 no.4
• /
• pp.447-462
• /
• 2020

In this paper, a simplified seismic design method for low-rise dual frame-steel plate shear wall (SPSW) structures is proposed in the framework of performance-based seismic design. The dynamic response of a low-rise structure is mainly dominated by the first-mode and the structural system can be simplified to an equivalent single degree-of-freedom (SDOF) oscillator. The dual frame-SPSW structure was decomposed into a frame system and a SPSW system and they were simplified to an equivalent F-SDOF (SDOF for frame) oscillator and an equivalent S-SDOF (SDOF for SPSW) oscillator, respectively. The analytical models of F-SDOF and S-SDOF oscillators were constructed based on the OpenSees platform. The equivalent SDOF oscillator (D-SDOF, dual SDOF) for the frame-SPSW system was developed by combining the F-SDOF and S-SDOF oscillators in parallel. By employing the lateral force resistance coefficients and seismic demands of D-SDOF oscillator, the design approach of SPSW systems was developed. A 7-story frame-SPSW system was adopted to verify the feasibility and demonstrate the design process of the simplified method. The results also show the seismic demands derived by the equivalent dual SDOF oscillator have a good consistence with that by the frame-SPSW structure.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.395-408
• /
• 2012

An experimental investigation with 2.8kW Nd:YAG laser system was carried out to study the effects of different laser process parameters on the microstructure and hardness of STD11. The optical lens with the elliptical profile are designed to obtain a wide surface hardening area with uniform hardness. The Laser beam is allowed to scan on the surface of the work piece varying the power (1600, 1800 and 1900kW) and traverse speed (200, 400, 600, 800 and 1000mm/min) at three different F-numbers of lens. After laser surface treatment three zones, In the microstructure have been observed : melted zone(decarburization), heat affected zone(martensite), and the substrate.