• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.4
• /
• pp.169-173
• /
• 2008

$Eu^{3+}$ and $Bi^{3+}$ co-doped $YVO_4$ phosphors were produced by a microwave heating process. When the microwave heating method was synthesized,. the particle size was very small and the particles tended to agglomerate. However, as the heating time increased, the particle size increased and the agglomeration decreased. The emission spectrum exhibited a weak band for $^5D_0{\longrightarrow}^7F_1$ at 594.91 and 602.3 nm and strong sharp peaks at 616.7 and 620.0 nm due to the $^5D_0{\longrightarrow}^7F_2$ transition of $Eu^{3+}$. Microwave heating synthesis can provide a product without long time heating as well as good homogeneous distribution of activators.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.111-116
• /
• 2000

700nm red emission(3F3longrightarrow3H6) in Tm3+ ion with 800 nm(3H6longrightarrow3H4) excitation via upconversion process has been reported only in host materials which have low phonon energies such as halide crystals. However, we observed 700nm and 480nm(1G4longrightarrow3H6) upconverted emission with 800nm excitation in several oxide glasses which has never reported. With spectroscopic analyses and lifetime measurements of each nergy level of Tm3+ ion doped in various oxide glasses, following mechanisms are suggested. For red upconversion, upconversion mechanism changed with Tm3+ concentration. While direct excitation up to 3F3 level via anti-Stokes excitation was dominated at low concentration, two-step excitation via 3H6longrightarrow3H4 and 3F4longrightarrow3F3 transitions was dominated at high concentration. For blue upconversion, two step excitation mechanism up to 1G4 level was suggested as follows : electrons are exciated up to 3H5 with direct excitation with pumping light up to 3H4 followed by multiphonon relaxation, and then additional reabsorption of pumping light excites electrons up to 1G4.

• Korean Journal of Animal Reproduction
• /
• v.10 no.1
• /
• pp.27-35
• /
• 1986

As a preliminary experiment to establish the process on the sexing of mouse embryos by chromosomal analysis, present studies were carried out with inbred (ICR, C57BL) and F1 hybrid [(ICR${\times}$C57BL) = F1 ${\times}$ ICR] mice to investigate the blastomere numbers and mitotic indices (M.I.) to the developmental stage of embryos recovered, the optimum periods of anti-mitotic agent administration, the successful rates of sexing and sex-ratio. The results obtained were summarized as follows: 1. The blastomere numbers (mean${\pm}$S.E.) of the morula and blastocyst were 18${\pm}$0.4 and 54${\pm}$0.7, respectively. 2. Whereas the M.I. of F1 hybrid (16${\pm}$0.2%) was higher than that fo inbred ICR (15${\pm}$0.1%) and C57BL (12${\pm}$0.6%) in the different strains, the morula (7${\pm}$0.6%) was higher than that of blastocyst (6${\pm}$0.4%) in the case of embryo stages. 3. Following to anti-mitotic agents treated, the M.I. of embryos cultured with Colcemid (17${\pm}$1.1%) was superior to that fo embryos cultured with Velban (12${\pm}$0.9%) and the Colcemid injection (7${\pm}$0.4%). 4. The successful rate of sexing in the blastocyst (38.7%; 124/320) was superior to the morula (35.9%; 52/145), and the F1 hybrid (48.1%) was higher than that of inbred ICR (42.4%) and C57 BL (28.2%). 5. In the successful rate of sexing to the methods of administration, the embryos cultured with Colcemid (46.0%) was superior to that of embryos cultured with Velban (39.0%) and the Colcemid injection (38.8%). 6. Of 98 embryos sexed after culture with Colcemid, 89(90.8%) were observed between 2 and 4 hrs. In the case of Velban treatment, 83.1% (74/89) was observed between 2$\frac{1}{2}$ and 4$\frac{1}{2}$ hrs. 7. Out of 761 prepared embryos it was possible to sex 311; 157 were male and 154 were female, i.e.a sex-ratio of 50% a, pp.oximately.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.154-163
• /
• 2017

Collaborative filtering, one of the most widely used techniques to build recommender systems, is based on the idea that users with similar preferences can help one another find useful items. Credit card user behavior analytics show that most customers hold three or less credit cards without duplicates. This behavior is one of the most influential factors to data sparsity. The 'cold-start' problem caused by data sparsity prevents recommender system from providing recommendation properly in the personalized credit card recommendation scenario. We propose a personalized credit card recommender system to address the cold-start problem, using multiple user profiles. The proposed system consists of a training process and an application process using five user profiles. In the training process, the five user profiles are transformed to five user networks based on the cosine similarity, and an integrated user network is derived by weighted sum of each user network. The application process selects k-nearest neighbors (users) from the integrated user network derived in the training process, and recommends three of the most frequently used credit card by the k-nearest neighbors. In order to demonstrate the performance of the proposed system, we conducted experiments with real credit card user data and calculated the F1 Values. The F1 value of the proposed system was compared with that of the existing recommendation techniques. The results show that the proposed system provides better recommendation than the existing techniques. This paper not only contributes to solving the cold start problem that may occur in the personalized credit card recommendation scenario, but also is expected for financial companies to improve customer satisfactions and increase corporate profits by providing recommendation properly.

• Transactions of Materials Processing
• /
• v.4 no.1
• /
• pp.79-91
• /
• 1995

Precision forming of electronic components has appeared to be competitive according to manufacturing cost and dimensional tolerances. Now domestic electronic companies have been involving in utilization of the finite element method in process design of precision forming. A forming process to produce an electronic component, aperture, has been inbestigated to find out forming defects during multi-operations. The applications of the commercial FEM software MARC show a possibility of defect in precision coining process among the whole multi-process. Thus the coining process of three-dimensional deformation is analyzed using DAMF-3D which has been developed in this lab with the rigid-plastic algorithm. The result f simulations by DAMF-3D provides clear description of the defect involved in the coining process.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.2
• /
• pp.141-145
• /
• 1994

Conventional commercial thermal process for preparing Sikhae (Rice beverage) in a hermetically sealed container was evaluated to solve the nutritional deterioration and organoleptic inferiority problem caused by severe heat treatment. A milder thermal process with an aid of Nisin, a GRAS-grade, selectively germicidal compound, was introduced to destroy the putrefactive microorganisms. In this experiment, hot-filling method with Nisin, and thermal processing (at 110$^{\circ}C$ for 15 minutes with Nisin, at 121$^{\circ}C$ for 25 minutes without Nisin) were compared. The quality of Sikhae could be enhanced and over 90% of the thermal process could be conserved by this process in terms of sterilizing value without quality deterioration when processing the bottled Sikhae at 110$^{\circ}$ for 15 minutes $\{(F^{10}{_{121})_{process}=1.54\}$.

• Journal of applied mathematics & informatics
• /
• v.4 no.2
• /
• pp.477-485
• /
• 1997

Let E be a smooth Banach space. Suppose T:$E \rightarrow E$ is a strongly accretive map. It is proved that each of the two well known fixed point iteration methods (the Mann and ishikawa iteration methods), under suitable conditions converges strongly to a solution of the equation $T_x=f$.

• Journal of the Korean Mathematical Society
• /
• v.33 no.4
• /
• pp.983-992
• /
• 1996

Let p(x, dy) be a transition probability function on $(S, \rho)$, where S is a complete separable metric space. Then a Markov process $X_n$ which has p(x, dy) as its transition probability may be generated by random iterations of the form $X_{n+1} = f(X_n, \varepsilon_{n+1})$, where $\varepsilon_n$ is a sequence of independent and identically distributed random variables (See, e.g., Kifer(1986), Bhattacharya and Waymire(1990)).

• Communications of the Korean Mathematical Society
• /
• v.13 no.4
• /
• pp.765-773
• /
• 1998

Let E be a smooth Banach space. Suppose T : E longrightarrow E is a strongly accretive map. It is proved that each of the two well known fixed point iteration methods (the Mann and Ishikawa iteration methods), under suitable conditions, converges strongly to a solution of the equation Tx = f.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.33.5-34
• /
• 2008