• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.127-130
• /
• 2002

In this study, development of a new LTCC material using a non-glassy system was attempted with respect to reducing the fabrication process steps and cost down. Lowering the sintering temperature can be achieved by liquid phase sintering. For LTCC application, the starting material must have quality factor as high as possible in microwave frequency range. And also, the material should have a low dielectric constant for enhancing the signal propagation speed. Regarding these factors, dielectric constants of various materials were estimated by the Clausius-Mosotti equation. Among them, CaWO$_4$ was tamed out the suitable LTCC material. CaWO$_4$ can be sintered up to 98% of full density at 1200$^{\circ}C$ for 3 hours. It's measured dielectric constant, quality factor, and temperature coefficient of resonant frequency were 10.15, 62880GHz, and -27.8ppm/$^{\circ}C$, respectively. In order to modify the dielectric properties and densification temperature, 0.5∼1.5 wt% LiF were added to CaWO$_4$. LiF addition reduced the sintering temperature/time down to 800$^{\circ}C$/10∼30min due to the reactive liquid phase sintering. Dielectric constant lowered from 10.15 to 9.38 and Q x fo increased up to 92000GHz with increasing LiF content.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.106-111
• /
• 2000

The magnetic thin films can be prepared without vacuum process and under the low temperature (<100 $^{\circ}C$) by ferrite plating. We have performed ferrite plating of M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$(x=0.00~0.08) films and N $i_{x}$Z $n_{0.22}$F $e_{*}$2.78-x/ $O_4$(x=0.00~0.15) films on cover glass at the substrate temperature 90 $^{\circ}C$. The crystal structure of the samples has been identified as a single phase of polycrystal spinel structure by x-ray diffraction technique. The lattice constant in the M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$films increases but in the N $i_{x}$Z $n_{0.22}$F $e_{*}$2.78-x/ $O_4$films decrease with the composition parameter, x. The saturation magnetization in the M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$films does not greatly change, in agreement with observations on bulk samples.k samples.k samples.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.155-174
• /
• 2015

The purposes of this study were to analyze the property of educational needs of teachers for educational contents of invention and intellectual property in secondary vocational education and provide fundamental data for the development of job training programs so as to develop the capabilities of teachers, the base for effective education of invention intellectual property in secondary vocational education. To achieve them, educational needs for the educational contents of invention intellectual property and the priority of the educational needs in secondary vocational education based on the recognition of the teachers were analyzed and suggested. Concrete results of this study can be suggested as follows. First, the average of educational needs of the teachers for the educational contents of invention intellectual property in secondary vocational education was 5.02. There were 23 items of the educational contents whose educational needs were higher than the average of the whole items and for those items and the average of each item, there were F4(The average of patent applications) 6.72, F5(Modification and supplementation of specification sheets) 6.46, F2(Writing of patent floor plans) 6.39, F3(Writing of patent specification sheets and abstraction) 6.31, A5(Invention method and activity) 6.27, E6(Invention design project) 6.15, H3(Invention commercialization) 5.97, F1(Patent information and application) 5.90, E5(Design obligation) 5.78, E3(Designing process of inventional design) 5.77, A4(Invention and problem solving) 5.57, G2(Patent investigation and classification) 5.47, C2(Thinking method of inventional problem solution) 5.45, E4(Production of inventional design product) 5.45, B5(Inventional patent project) 5.42, A2(Creativity development) 5.26, C4(Inventional problem solving project) 5.26, H4(Invention marketing) 5.26, H2(Analysis on invention commercialization) 5.20, D4(Invention and management) 5.16, C3(Problem solving activity) 5.14, E2(Inventional design devise and expression) 5.11, B3(Actuality of inventional method) 5.08 in order. Second, for the priority of educational needs of the teachers for the educational contents of invention intellectual property in secondary vocational education, there were 13 items of the educational contents for the first rank, 10 for the second rank and 17 for the third rank. The items of the educational contents for the first rank were A4(invention and problem solving), A5(inventional method and activity), B5(Invention patent project), C2(Thinking method of inventional problem solution), C4(Inventional problem solving project), E3(Inventional design process), E4(Production of inventional design product), E5(Design obligation), E6(Invention design project), F1(Patent information and application), F2(Writing of patent floor plan), F3(Writing of patent specification sheet and abstract), and H3(Invention commercialization. The items of the educational contents for the second rank were A2(Creativity development), B3(Actuality of inventional method), C3(Problem solving activity), D4(Invention and management), E2(Invention design devise and expression), F4(Range of patent demand), F5(Modification and supplementation of specification sheet), G2(Patent investigation and classification), H2(Analysis on invention commercialization), and H4(Invention marketing). The items for the third rank were the educational contents except the ones of the first rank and the second rank.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.547-554
• /
• 2004

We found that the Bacterium Burkholderia cepacia in livestock wastewater treatment plant was predominant species. We investigated the growth rate of this and treatment characteristics for organic matter and nitrogen removal in livestock wastewater using this microorganism. First, we cultured B. cepacia. And then, to conducted treatment for livestock wastewater by using B. cepacia., we changed C/N from 0.2~4.4. When we operated A and B process, changing F/M ratio from 1.2 to 4.4. In experiment of C/N variations, when C/N was 1.8, we found that the optimal condition for organic matter and nutrient removal effect was higher and the removal efficiency of $SCOD_{cr}$, $SBOD_5$,$NH_4-N$ was 78.4%, 95% and 74.8%. So, It is possible to treat the wastewater having the lower C/N contents such as livestock wastewater using this microorganism. In experiment of A and B process for livestock wastewater, we found that the removal efficiency of organic matter and nitrogen in operating mode of A process was higher than that of B process. Also, the optimal F/M operating A process was 0.013 and the removal efficiency of $SBOD_5$, $SCOD_{cr}$, TN and TP were 97%, 60%, 95% and 91%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.132-132
• /
• 2015

Virtual metrology (VM) model based on plasma information (PI) parameter for C4F8 plasma-assisted oxide etching processes is developed to predict and monitor the process results such as an etching rate with improved performance. To apply fault detection and classification (FDC) or advanced process control (APC) models on to the real mass production lines efficiently, high performance VM model is certainly required and principal component regression (PCR) is preferred technique for VM modeling despite this method requires many number of data set to obtain statistically guaranteed accuracy. In this study, as an effective method to include the 'good information' representing parameter into the VM model, PI parameters are introduced and applied for the etch rate prediction. By the adoption of PI parameters of b-, q-factors and surface passivation parameters as PCs into the PCR based VM model, information about the reactions in the plasma volume, surface, and sheath regions can be efficiently included into the VM model; thus, the performance of VM is secured even for insufficient data set provided cases. For mass production data of 350 wafers, developed PI based VM (PI-VM) model was satisfied required prediction accuracy of industry in C4F8 plasma-assisted oxide etching process.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.1
• /
• pp.26-30
• /
• 2006

For the purpose of developing capacitive humidity sensor having interdigital electrodes, interdigital electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thickness. For the development of ASIC, switched capacitor signal processing circuits for capacitive humidity sensor were designed and simulated by Cadence using $0.25{\mu}m$ CMOS process parameters. The signal processing circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control. The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is $0.4%R.H./^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of $3%R.H.{\sim}98%R.H.$. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigital electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.3
• /
• pp.144-148
• /
• 2001

For the purpose of developing capacitive humidity sensor having interdigit electrodes, interdigit electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thichness. For the development of ASIC, switched capacitor signal conditioning circuits for capacitive humidity sensor were designed and simulated by cadence using 0.25um CMOS process parameters. The signal conditioning circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is 0.4%R.H./$^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of 3%R.H. ${\sim}$ 98%R.H.. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigit electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc..

• Journal of Ginseng Research
• /
• v.43 no.4
• /
• pp.635-644
• /
• 2019

Background: To increase the pharmacological effects of red ginseng (RG, the steamed root of Panax ginseng Meyer), RG products modified by heat process or fermentation have been developed. However, the antiallergic effects of RG and modified/fermented RG have not been simultaneously examined. Therefore, we examined the allergic rhinitis (AR)-inhibitory effects of water-extracted RG (wRG), 50% ethanol-extracted RG (eRG), and bifidobacteria-fermented eRG (fRG) in vivo. Methods: RBL-2H3 cells were stimulated with phorbol 12-myristate-13-acetate/A23187. Mice with AR were prepared by treatment with ovalbumin. Allergic markers IgE, tumor necrosis factor-${\alpha}$, interleukin (IL)-4, and IL-5 were assayed in the blood, bronchoalveolar lavage fluid, nasal mucosa, and colon using enzyme-linked immunosorbent assay. Mast cells, eosinophils, and Th2 cell populations were assayed using a flow cytometer. Results: RG products potently inhibited IL-4 expression in phorbol 12-myristate-13-acetate/A23187-stimulated RBL-2H3 cells. Of tested RG products, fRG most potently inhibited IL-4 expression. RG products also alleviated ovalbumin-induced AR in mice. Of these, fRG most potently reduced nasal allergy symptoms and blood IgE levels. fRG treatment also reduced IL-4 and IL-5 levels in bronchoalveolar lavage fluid, nasal mucosa, and reduced mast cells, eosinophils, and Th2 cell populations. Furthermore, treatment with fRG reduced IL-4, IL-5, and IL-13 levels in the colon and restored ovalbumin-suppressed Bacteroidetes and Actinobacteria populations and ovalbumin-induced Firmicutes population in gut microbiota. Treatment with ginsenoside Rd significantly alleviated ovalbumin-induced AR in mice. Conclusion: fRG and ginsenoside Rd may alleviate AR by suppressing IgE, IL-4, IL-5, and IL-13 expression and restoring the composition of gut microbiota.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.6
• /
• pp.251-257
• /
• 2020

In order to quickly and clearly recognize characters or images through display glass, glare of the glass must be suppressed. In this study, we tried to reduce glare by analyzing changes in glass surface shape and optical properties through etching process. The etching process was performed as a function of concentrations of the etching solutions, BOE and HF. During the etching process, a compound containing F ion was generated on the surface of the glass, forming an irregular pattern in the form of a projection, and thus various optical properties of the glass were changed; reflectance of 2.5~4.6 %, haze of 4.5~6.6 %, transmittance of 77~92 %, and gloss of 82~107 GU. As a result, optimum etching condition was obtained to minimize the loss of other optical properties while suppressing glare of the glass.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.10-14
• /
• 1997

Single pulse laser excitation at 656 nm and successive pulse excitation at 635.2 and 648.4 nm produced blue emission at 480 nm by two-step upconversion process in Tm/sup 3+/:LaF/sub 3/. The excited-state absorption cross-section of the /sup 3/F/sub 4/ to /sup 1/G/sub 4/ transition was estimated by a looping mechanism with cross-relaxation processes. The dynamics of up-conversion andthe possibility of the photon avalanche by a pulse laser excitation were studied by numerical simulation with the rate equation model.