• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.395-403
• /
• 2000

It is so sensitive that the matter of compensation for private possessions caused in the course of public construction planning is very important. Especially, more logical planning is necessary when the dam be constructed, because it is mainly controlled by the surface of water, and if that planning is made public, artificial change is occurred in land use in that area for the purpose of rising the compensation. In this study, the plan for the application of aerial photo based ortho image was drew up for solving these problems and for the rational, rapid compensation. Ortho image was made by aerial photo, used as reading material for the change in land use. The modeling of drainage basin, came under the planning surface of water, and the 3D simulation were performed for the scene analysis, the change understanding in land use for a lot number in a certain period by overlapping the digital image, the digital land registration map, and the digital topography map as well as the analysis of the admitted land followed by the height of reservoir water.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.317-321
• /
• 2012

This study was carried out to investigate the effect of EC levels in nutrient solution on the growth of rose in coir substrate during the juvenile. Nutrient concentration were EC 0.6, 1.0, 1.4, and $1.8dS{\cdot}m^{-1}$. In spite of high concentration of nutrient solution was supplied, EC and inorganic ions content in the extract of substrate was no difference by 22 days after planting. After that, they was rapidly increased with higher concentration of nutrient solution. Number of shoot was highest in EC $1.8dS{\cdot}m^{-1}$ at 2nd growth cycle, 90 days after planting, after that was showed a tendency to increase with increasing nutrient concentration, but was no significant difference among treatment except EC $0.6dS{\cdot}m^{-1}$. Judging by results of growth of rose and contents of inorganic ion in extracts of media, our experiment suggests that the suitable nutrient concentration is EC $1.8dS{\cdot}m^{-1}$ until 90 days and then EC $1.4dS{\cdot}m^{-1}$ until 165 days after planting that is more higher than conventional nutrient concentration for absorption by coir.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.53-65
• /
• 2001

Purpose : To improve the local control of patients with nasopharyngeal cancer, we have implemented 3-D conformal radiotherapy and forward intensity modulated radiation therapy (IMRT) to used of compensating filters. Three dimension conformal radiotherapy with intensity modulation is a new modality for cancer treatments. We designed 3-D treatment planning with 3-D RTP (radiation treatment planning system) and evaluation dose distribution with tumor control probability (TCP) and normal tissue complication probability (NTCP). Material and Methods : We have developed a treatment plan consisting four intensity modulated photon fields that are delivered through the compensating tilters and block transmission for critical organs. We get a full size CT imaging including head and neck as 3 mm slices, and delineating PTV (planning target volume) and surrounding critical organs, and reconstructed 3D imaging on the computer windows. In the planning stage, the planner specifies the number of beams and their directions including non-coplanar, and the prescribed doses for the target volume and the permissible dose of normal organs and the overlap regions. We designed compensating filter according to tissue deficit and PTV volume shape also dose weighting for each field to obtain adequate dose distribution, and shielding blocks weighting for transmission. Therapeutic gains were evaluated by numerical equation of tumor control probability and normal tissue complication probability. The TCP and NTCP by DVH (dose volume histogram) were compared with the 3-D conformal radiotherapy and forward intensity modulated conformal radiotherapy by compensator and blocks weighting. Optimization for the weight distribution was peformed iteration with initial guess weight or the even weight distribution. The TCP and NTCP by DVH were compared with the 3-D conformal radiotherapy and intensitiy modulated conformal radiotherapy by compensator and blocks weighting. Results : Using a four field IMRT plan, we have customized dose distribution to conform and deliver sufficient dose to the PTV. In addition, in the overlap regions between the PTV and the normal organs (spinal cord, salivary grand, pituitary, optic nerves), the dose is kept within the tolerance of the respective organs. We evaluated to obtain sufficient TCP value and acceptable NTCP using compensating filters. Quality assurance checks show acceptable agreement between the planned and the implemented MLC(multi-leaf collimator). Conclusion : IMRT provides a powerful and efficient solution for complex planning problems where the surrounding normal tissues place severe constraints on the prescription dose. The intensity modulated fields can be efficaciously and accurately delivered using compensating filters.

• Journal of Multimedia Information System
• /
• v.4 no.3
• /
• pp.157-162
• /
• 2017

The title of this project is "A Simple Interactive 3D Interior Design Application for Living Room - Cost Management", focusing on developing an application that enables costing and designing to be executed concurrently in interior design phases. This is because any changes made at costing phase after design phase is completed, it will potentially lead to unnecessary increase in cost and time. Therefore, the objective of this project is aimed to devise a cost management module to be included in the proposed application, allowing interior designer to make cost-based decision at the designing phase itself. This can be achieved through its proposed functions which include total cost update, budget management, cost estimator calculator and material list generation. The methodology being proposed in this project is Prototyping Development, categorized under Rapid Application Development (RAD), by starting off with planning, analysis, design and implementation phases are performed concurrently and repeatedly in a cycle to produce a prototype until the application is completed. In the end of this project, the developed prototype is expected to contribute a better solution towards cost management in interior design.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.4
• /
• pp.108-117
• /
• 1979

In order to obtain the basic data for design of water structures which can be contributed to the planning of water use. Best fitted distribution function and the equations for the probable minimum flow were derived to the annual minimum flow of five subwatersheds along Geum River basin. The result were analyzed and summarized as follows. 1. Type III extremal distribution was considered as a best fit one among some other distributions such as exponential and two parameter lognormal distribution by $x^2$-goodness of fit test. 2. The minimum flow are analyzed by Type III extremal distribution which contains a shape parameter $\lambda$, a location parameter ${\beta}$ and a minimum drought $\gamma$. If a minimum drought $\gamma=0$, equations for the probable minimum flow, $D_T$, were derived as $D_T={\beta}e^{\lambda}1^{y'}$, with two parameters and as $D_T=\gamma+(\^{\beta}-\gamma)e^{{\lambda}y'}$ with three parameters in case of a minimum drought ${\gamma}>0$ respectively. 3. Probable minimum flow following the return periods for each stations were also obtained by above mentioned equations. Frequency curves for each station are drawn in the text. 4. Mathematical equation with three parameters is more suitable one than that of two parameters if much difference exist between the maximum and the minimum value among observed data.

• The KIPS Transactions:PartD
• /
• v.12D no.4 s.100
• /
• pp.601-608
• /
• 2005

It is very important to improve qualify, cost and the necessary period for production in software development project. In order to improve software quality, cost and period, final product as well as a project planning and process itself are concerned. In CMMI of SEI and ISO/IEC 15504 (SPICE), the process for the project management is specified. Recently, as a method of total management - including man power, budget, and schedule - PMBOK is introduced. The detailed and specific management method in PMBOK results in multiple experiments that apply PMBOK to enterprise environment. In this paper, hybrid method of CMMI and PMBOK is proposed to obey CMMI, at the same time, to apply the detailed and specific management method in PMBOK and develop metrics for the method.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.4
• /
• pp.41-49
• /
• 2020

The purpose of this study was to investigate the use of the Deep Neural Networks(DNN) model to classify user's emotions, in particular Electroencephalography(EEG) toward Virtual-Reality(VR) based 3D design alternatives. Four different types of VR Space were constructed to measure a user's emotion and EEG was measured for each stimulus. In addition to the quantitative evaluation based on EEG data, a questionnaire was conducted to qualitatively check whether there is a difference between VR stimuli. As a result, there is a significant difference between plan types according to the normalized ranking method. Therefore, the value of the subjective questionnaire was used as labeling data and collected EEG data was used for a feature value in the DNN model. Google TensorFlow was used to build and train the model. The accuracy of the developed model was 98.9%, which is higher than in previous studies. This indicates that there is a possibility of VR and Fast Fourier Transform(FFT) processing would affect the accuracy of the model, which means that it is possible to classify a user's emotions toward VR based 3D design alternatives by measuring the EEG with this model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.489-496
• /
• 2011

Bike system is one of the green transportation systems and spotlighted recently. In the TOD (Transit-Oriented Development) based transportation and urban planning, bike system will be the major part as linkage modes. In this paper, bike demand estimation model was firstly established in Korea, with considering of personal and household characteristics of traveller, social and economic characteristics of city, weather conditions, and so on. The model reflects population density, the number of students except elementary school students, the number of vehicles, the length of bike roads, and monthly income. The adjusted $R^2$ was 0.738: the model is highly fitted. The results of this paper yield bike demand estimation in the urban planning area: further estimated results will be using to determine economic feasibility and size of bike facility. In other words, this paper is expected to provide the theoretical basis that supporting justification and investment efficiency of bike plans, which are actively progressed recently.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.126-131
• /
• 2009

Acetabular dysplasia is a condition defined by inadequate development of an individual's acetabulum. Individual diversity of the symptoms in this disease needs safe and accurate preoperative planning. Technologies that utilize multidimensional image information are thus important. The assessment method by Janzen et al. was suggested a coefficient method in evaluation of acetabular dysplasia. In this study, we applied it, using a three-dimensional computed tomography (3D CT) on the koreans. 19 cases of the normal hips and 4 cases of the acetabular dysplasia were investigated to evaluate the proved method; 3D CT was used to define the geometric center of the femoral head and to measure center edge angles at $10^{\circ}$ rotational increments around the acetabular rim. Mean and standard deviation in CEAs (Center Edge Angle) of normal 19 hips at $10^{\circ}$ rotational increments from anterior to posterior rim were determined, and termed as a 'normal curve'. Then this normal values were compared with the CEA data measured from 4 cases of acetabular dysplasia patiens. Quantative comparison of the CEA values between the normal cases and dysplasia cases was successfully demonstrated, and thus, we claim that this simple CT method of assessing acetabular dysplasia can be well applicable to diagnosis, quantification and surgical planning for adult acetabular dysplasia patients.

• Journal of Cardiovascular Imaging
• /
• v.31 no.4
• /
• pp.180-187
• /
• 2023

BACKGROUND: Two-dimensional (2D) transesophageal echocardiography (TEE) is commonly used for assessing patients undergoing transcatheter atrial septal defect (ASD) device closure. 3D TEE, albeit providing high resolution en-face images of ASD, is used in only a fraction of cases. We aimed to perform a comparative analysis between 3D and 2D TEE assessment for ASD device planning. METHODS: This was a prospective, observational study conducted over a period of one year. Patients deemed suitable for device closure underwent 2D and 3D TEE at baseline. Defect characteristics, assessed separately in both modalities, were compared. Using regression analysis, we aimed to derive an equation for predicting device size using 3D TEE parameters. RESULTS: Thirty patients were included in the study, majority being females (83%). The mean age of the study population was 40.5 ± 12.05 years. Chest pain, dyspnea and palpitations were the common presenting complaints. All patients had suitable rims on 2D TEE. A good agreement was noted between 2D and 3D TEE for measured ASD diameters. 3D TEE showed that majority of defects were circular in shape (60%). The final device size used had high degree of correlation with 3D defect area and circumference. An equation was devised to predict device size using 3D defect area and circumference. The mean device size obtained from the equation was similar to the actual device size used in the study population (p = 0.31). CONCLUSIONS: Device sizing based on 3D TEE parameters alone is equally effective for transcatheter ASD closure as compared to 2D TEE.