• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4447-4464
• /
• 2023

This paper focuses on the development of a new computational model of the CNESTEN's TRIGA Mark II research reactor using the 3D continuous energy Monte-Carlo code TRIPOLI-4 (T4). This new model was developed to assess neutronic simulations and determine quantities of interest such as kinetic parameters of the reactor, control rods worth, power peaking factors and neutron flux distributions. This model is also a key tool used to accurately design new experiments in the TRIGA reactor, to analyze these experiments and to carry out sensitivity and uncertainty studies. The geometry and materials data, as part of the MCNP reference model, were used to build the T4 model. In this regard, the differences between the two models are mainly due to mathematical approaches of both codes. Indeed, the study presented in this article is divided into two parts: the first part deals with the development and the validation of the T4 model. The results obtained with the T4 model were compared to the existing MCNP reference model and to the experimental results from the Final Safety Analysis Report (FSAR). Different core configurations were investigated via simulations to test the computational model reliability in predicting the physical parameters of the reactor. As a fairly good agreement among the results was deduced, it seems reasonable to assume that the T4 model can accurately reproduce the MCNP calculated values. The second part of this study is devoted to the sensitivity and uncertainty (S/U) studies that were carried out to quantify the nuclear data uncertainty in the multiplication factor k_eff. For that purpose, the T4 model was used to calculate the sensitivity profiles of the k_eff to the nuclear data. The integrated-sensitivities were compared to the results obtained from the previous works that were carried out with MCNP and SCALE-6.2 simulation tools and differences of less than 5% were obtained for most of these quantities except for the C-graphite sensitivities. Moreover, the nuclear data uncertainties in the k_eff were derived using the COMAC-V2.1 covariance matrices library and the calculated sensitivities. The results have shown that the total nuclear data uncertainty in the k_eff is around 585 pcm using the COMAC-V2.1. This study also demonstrates that the contribution of zirconium isotopes to the nuclear data uncertainty in the k_eff is not negligible and should be taken into account when performing S/U analysis.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.133-134
• /
• 2014

The full transport equation approach for laminar non-premixed flame with detailed chemistry, soot and radiation has an advantage in accuracy and describing for emission pathway, but this approach requires the excessive computational cost especially for a higher-order hydrocarbon fuel flames. On the other hand, the standard flamelet model has an efficiency and accuracy for non-premixed flame, though this model is not suitable for simulating slow processor like soot and radiation in laminar non-premixed flame situation. To overcome this limitation, modified transient flamelet model is developed which coupled with two-equation soot model involved in soot formation and evolution mechanism such as nucleation, surface growth, oxidation and agglomeration.

• Structural Engineering and Mechanics
• /
• v.31 no.4
• /
• pp.423-437
• /
• 2009

In order to perform a step-by-step force-displacement response analysis or dynamic time-history analysis of large buildings with masonry infilled R/C frames, a continuous force-deformation model based on an equivalent strut approach is proposed for masonry infill panels containing openings. The model, which is applicable for degrading elements, can be implemented to replicate a wide range of monotonic force-displacement behaviour, resulting from different design and geometry, by varying the control parameters of the model. The control parameters of the proposed continuous model are determined using experimental data. The experimental program includes fifteen 1/3-scale, single-story, single-bay reinforced concrete frame specimens subjected to lateral cyclic loading. The parameters investigated include the shape, the size, the location of the opening and the infill compressive strength. The actual properties of the infill and henceforth the characteristics needed for the diagonal strut model are based on the assessment of its lateral resistance by the subtraction of the response of the bare frame from the response of the infilled frame.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.27-34
• /
• 1984

In order to investigate the acidic chlorinated compounds in pulp bleaching spent liquor, the lignin model compounds, coniferyl alcohol(mp $74^{\circ}C$), ${\omega}$-(2-methoxyphenoxy)-acetoguaiacone(mp $93^{\circ}C$) and dehydrodiisoeugenol(mp $133^{\circ}C$), were synthesized and chlorinated by chlorine in glacial acetic acid. From the chlorinated products, the following chlorine-containing aromatic compounds were identified by TLC. In coniferyl alcohol the chlorine-substituted compounds at 4-, 5-and 4,5-position of aromatic nucleus were identified and in ${\beta}$-0-4 type the compounds substituted chlorine for alkyl group and/or hydrogen at land 1,4-position of aromatic nucleus expected to be formed by electrophilic displacement from ${\omega}$-(2-methoxyphenoxy)-acetoguaiacone were not identified but the chlorine-substituted compounds at 4-, 5-, 6- and 5,6-position of aromatic nucleus were identified.

• KSBB Journal
• /
• v.20 no.2 s.91
• /
• pp.106-111
• /
• 2005

The functional relationship between the number of mole of an i-fatty acid (Si) included in fish oil and the hydrolysis time(t) was expressed as a mathematical model, $S_i=-{\alpha_i}1n(t)+\beta_i$. The average errors of calculated values on the basis of the measured values were distributed in the range of less than $5\%$ for all the 15 fatty aids composing of fish oil. The equation of hydrolysis rate of each fatty acid was deduced as $v_i={\gamma_i}exp(\frac{S_i}{\alpha_i})$ from the above-mentioned $S_i=-{\alpha_i}ln(t)+{\beta_i}$. Therefore the hydrolysis yields of fatty acids were analyzed using the equation of $S_i\;Vs.\;t.$. The 15 fatty acids were categorized into 4groups from the view point of hydrolysis yield. The hydrolysis yields of the first group, including C14:0, C16:0, C16:1, C18:0, C18:1 (n-7) and 1l8:1 (n-9), were higher than $70\%$ at 48 hr of hydrolysis. Those of the second group, C20:1, C22:1, C18:3, C20:4 and C20:5, were distributed from $40\%,\;to\;60\%$, and third group were around $30\%$. The final group containing only C22:6 was very hard to be hydrolyzed and the yield was less than $20\%$ at the same time.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.633-644
• /
• 2004

For a smooth transition from IPv4 to IPv6 network, the research of transition mechanisms have been processing according to the various network situations. Therefore, we calculate the cost based on the VPN applicable model. Also, we present that conformance between the end point of VPN, the If encapsulation tunneling, applying position of translation mechanism and VPN applicable model are the factors which affect Costs.

• Advances in nano research
• /
• v.12 no.4
• /
• pp.345-352
• /
• 2022

In this paper, natural frequency curves are presented for three specific end supports considering distinct values of nonlocal parameter. The vibrational behavior of zigzag double walled carbon nanotubes is investigated using wave propagation with nonlocal effect. Frequency spectra of zigzag (12, 0) double walled carbon nanotubes have been analyzed with proposed model. Effects of nonlocal parameters have been fully investigated on the natural frequency against against variation of Poisson's ratio. A slow increase in frequencies against variation of Poisson's ratio also indicates insensitivity of it for suggested nonlocal model. Moreover, decrease in frequencies with increase in nonlocal parameter authenticates the applicability of nonlocal Love shell model. Also the frequency curves for C-F are lower throughout the computation than that of C-C curves.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.286-292
• /
• 1991

The authors propose to use the vortex generators in order to improve of the efficiency for the cambered otter boards. The equipments and testing method of this model test was the same as the previous report. This study was tested for 6 models such as the single cambered, the V-shaped cambered and the slotted cambered otter board without and with vortex generators. The results obtained are as follows: \circled1 C sub(L) of the single cambered model otter board with vortex generators was increased about 10% in comparison with that of model without vortex generators, C sub(D) decreased 2%, and L/D increased 5~20%. \circled2 L/D of the V-shaped cambered model otter board with vortex generators was increased 10~20% in comparison with that of model without vortex generators. \circled3 C sub(L) of the two slotted cambered model otter board with vortex generators was increased about 20% within an angle of attack 25$^{\circ}$ in comparison with that of without vortex generators, C sub(D) increased 5~20%, and L/D was higher than prototype within an angle of attack 20$^{\circ}$. \circled4 The separation point of the model otter boards with vortex generators was removed back ward a little in comparison with that of the model without vortex generators. \circled5 Flow speed difference of the back side to the front side of model otter boards with vortex generators was increased a little in comparison with that of the models without vortex generators. \circled6 The size of separation zone in case of the model otter boards with vortex generators was decreased about 10% in comparison with that of the models without vortex generators.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.9
• /
• pp.84-101
• /
• 1997

Inferring and recognizing 3D objects form a 2D occuluded image has been an important research area of computer vision. The octree model, a hierarchical volume description of 3D objects, may be utilized to generate projected images from arbitrary viewing directions, thereby providing an efficient means of the data base for 3D object recognition. We present a fast algorithm of finding the 4 pairs of feature points to estimate the viewing direction. The method is based on matching the object contour to the reference occuluded shapes of 49 viewing directions. The initially best matched viewing direction is calibrated by searching for the 4 pairs of feature points between the input image and the image projected along the estimated viewing direction. Then the input shape is recognized by matching to the projectd shape. The computational complexity of the proposed method is shown to be O(n$^{2}$) in the worst case, and that of the simple combinatorial method is O(m$^{4}$.n$^{4}$) where m and n denote the number of feature points of the 3D model object and the 2D object respectively.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.834-836
• /
• 2003

Recently, web services concept is rapidly rising as new solution to solve the integration problem among heterogeneous application systems . This web servic es concept is adaptable in the field of 4S application systems integration that handles the spatial information of GIS, SIIS, GNSS and ITS. So, this paper suggests a new 4S web services model for the infrastructures of nationwide spatial clearinghouse, which is mainly based on the OGC and W3C web services specifications. Conclusively, this proposed model that could serve various spatial data and services has some advantages of being flexibly and powerfully capable of integrating the 4S application systems owing to adapting the international standard specifications of OGC and W3C.