• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.406-412
• /
• 2003

We have developed a radio frequency excited slab waveguide $CO_2$ laser. The dimension of active volume is 2${\times}$40${\times}$400 mm. One concave and one convex mirror are used to make the unstable resonator of the positive branch. The radio frequency is 123 MHz and RF input power is varied from 100 to 900 W. The laser gas is set to a pressure of 10∼60 torr and the mixing ratio is $CO_2$:$N_2$:He=1:1:3. The laser output power of 70.7 W was obtained which corresponds to laser power to RF power conversion efficiency of 9.2%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.205-210
• /
• 2003

Alexandrite-like cubic zirconia single crystals were grown by skull melting method. The R.F. generator (output power is 35 ㎾) used for skull melting was operated at 2 MHz. The grown crystals were doped with up to 1 or 1.5 wt% and 0.5 or 1 wt% of rare earth metal ion (Pr, Nd) on$ ZrO_2-Y_2O_3$ (12 mol%). The grown crystals were cut for slice (0.25 mm) and round brilliant (12 mm in diameter). The cut stones were heat treated in air and nitrogen at $1000^{\circ}C$ for 2 hours and their optical absorption spectra ($\lambda$ = 400∼700 nm) data were obtained.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.61-69
• /
• 2008

Diagnosis of breast ultrasound is better than mammography in the early detection of breast cancer, but, it is difficult to detect microcalcification. We studied on detection for calcification of breast tissue using acoustic resonance and power doppler with 7.5 MHz linear probe in breast ultrasound. We first constructed breast tissue phantom made of gelatin and saw breast, and then observed calcification by the change of external vibration. Calcification injected breast tissue phantom visualized the difference for brightness and region of color in ROI regions of power doppler. Acoustic resonance almost never visualized in low frequency regions, plateau constituted in about 300-400 Hz and colors vanished according to the increase of frequency.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.62-68
• /
• 2002

Mother ship must be able to know accident occurrence information rapidly to rescue crew who fall in sea. In this paper, designed and manufactured transceiver of prescribed 447 MHz is operating as low power radio station specified in Radio Regulation. So, it is available without special permission proceedings getting form probation so that the use of this system may be easy. the system has been started for operation when the sensor get in touch with water. The system transmits with modulation by 500Hz square wave, and the receiver alarms when the transmitted signal is received. Therefore, the system can be used for not only saving a life, but also for low speed of data transmission below 2,400 bps, and other purposes.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.219-223
• /
• 2015

In this paper, a miniaturized radio frequency choke (RFC) using modified stubs is proposed to improve isolation characteristics in a multiple-input-multiple-output (MIMO) antenna system. The proposed RFC, based on the LC resonance, is designed to suppress the leakage current that leads to the degradation of antenna diversity performances in the MIMO antenna configuration. The proposed RFC is composed of two open stubs that are implemented on the top of the ground plane and miniaturized by adding a slit structure on the ground plane. The MIMO antennas are also designed to verify isolation performance in the LTE 2300 band (2,300-2,400 MHz). The MIMO antennas perform well with low reflection coefficient characteristics and high isolation characteristics in the whole LTE 2300 band. To evaluate the isolation in the MIMO system, the envelope correlation coefficient (ECC) is calculated, and the value is less than 0.08. The achieved ECC is regarded as a reasonable result for improving isolation performance in the frequency range of 2,300-2,400 MHz; also, radiation patterns of antenna elements are maintained regardless of the presence of RFC.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.457-467
• /
• 2012

In this paper, a miniaturized band-pass filter structure, which comprises the irises of small resonant aperture and L-type irises inverter, is proposed. Ridged circular aperture iris is chosen as an elementary resonator. L-type iris which is placed between two adjacent elementary resonators is newly proposed as impedance inverter in order to reduce longitudinal length of the proposed filter. The fabricated minimized filter has 400 MHz bandwidth at the 10 GHz center frequency and the whole size is reduced to 70 % in length compared to conventional filter.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.33-39
• /
• 2008

From a CCRF-excited zinc vapour laser with overlapped DC-discharge were emitted following 6 laser lines: two blue at 491.162[nm] and 492.403[nm], an orange at 589.433[nm] and three infrared lines at 747.879[nm], 758.848[nm] and 773.25[nm]. The discharge parameters were determined for an optimal laser operation. At a RF-power of 400[W] with the frequency 13.56[MHz] the optimal temperature of the oven lay between 780[K] and 800[K], the He-pressure between 3.5[kPa] and 5.5[kPa].

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.4
• /
• pp.274-281
• /
• 2010

This paper proposes a DFPS (Dual Frequency Power Source) impedance matching device for uniformity improvement of a semiconductor plasma etching system. The DFPS consists of two parts for safe plasma processing on large-area substrates. The first part is an ICP (Inductively Coupled Plasma) for high integration by using ferrite core. The second part is a CCP (Capacitive Coupled Plasma) to control uniformity of whole cells. Proposed DFPS can achieve high productivity improvement required for semiconductor equipment industry. The proposed plasma system is analyzed, simulated and experimentally verified with a matching equipment at 27.12MHz and 400kHz.

• Journal of the Korean Magnetic Resonance Society
• /
• v.17 no.2
• /
• pp.81-85
• /
• 2013

Various fluorine-containing materials are used in electronic devices like LCD display panels and Li-ion batteries. The structural conformation of fluorine in fluorinated materials is an important contributing factor that influences the chemical and physical properties. The conformation can be changed by heat and stress during manufacture or use. Understanding the conformational changes is critical for understanding the performance and durability of electronic devices. Solid-state NMR spectroscopy could be widely used for the analysis of various fluorine-containing materials for electronic devices. However, conventional CPMAS probes cannot be used for in-situ analysis of fluorine-containing electronic devices like LCD panels and Li-ion batteries. In this paper, we show the design, construction, and optimization of a $^{19}F-^{13}C$ double-resonance solid-state NMR probe for a 400MHz wide-bore magnet with a flat square coil for in-situ analysis of fluorine-containing electronic devices without observing fluorine background signals. This custom-built probe does not show any fluorine background signals, and can have higher efficiency for lossy samples.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2107-2115
• /
• 2007

In this paper, the scan conversion processor which converts the triangle represented by three vertices into pixel-level screen coordinates, depth coordinate, and color data is designed. The processor adopts scan-line algorithm which decomposes triangle into horizontal spans and then transforms the span into pixel data. By supporting top-left filling convention, it ensures that triangles that share an edge do not produce any dropouts or overlaps between adjacent polygons. It consists of about 21,400 gates and its maximum operating frequency is about 80 Mhz under 0.35um CMOS technology. Because its maximum pixel rate is about 80 Mpixels/sec, it can be applicable to mobile graphics application.