• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.111-119
• /
• 2010

In this paper the numerical methods of finding out the optimal position of optical phase conjugator (OPC) and the optimal fiber dispersion are proposed, which are able to effectively compensate overall channels in $16{\times}40$ Gbps WDM system. And the compensation characteristics in the system with two induced optimal parameters are compared with those in the system with the currently used mid-span spectral inversion (MSSI) in order to confirm the availability of the proposed methods. It is confirmed that the reception performances are largely improved in the system with the induced optimal parameters than in the system with MSSI through the analyzing the eye opening penalty (EOP) and bit error rate (BER) characteristics. It is also confirmed that two optimal parameters depend on each other, but are less related with the procedural problem about the first optimal value among these parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1601-1610
• /
• 2011

This paper discusses standardization activities, requirements and enabling technologies for 100G Ethernet and 100G OTN. The need of 100Gbps transport capacity has been gaining greater interest from service providers and carrier vendors. Moreover, optical transport networks based on OTN/DWDM are changing their properties to apply Ethernet traffic which is dramatically increasing. We realize and experimentally demonstrate OTU4 framer with commercial FPGA. The key features of the realized OTU4 framer are parallel signal processing function, multi-lane distribution function, GMP function and FEC function. The realized OTU4 framer has the large signal processing capacity of 120Gbps, which allows to transport about 120Gbps client signals such as $12{\times}10G$ Ethernet and $3{\times}40G$ Ethernet. The realized OTU4 framer has the advantages to quickly adjust to changing markets and new technologies by using commercial FPGA instead of ASIC.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.226-231
• /
• 2008

40 Gbps WDM Systems using super-Gaussian RZ pulses have been studied by numerical simulation to optimize their performance. The assumption of standard single mode fiber is valid when existing WDM systems are required to upgrade their performance to 40Gbps. It is shown that the standard single mode fiber can transmit optical signals over 720 km (Q > 10) by optimizing optical and electrical filter characteristics at the receiver and by compensation of dispersion. However, it is also shown that ${\pm}0.3%$ dispersion compensation tolerance per span (80 km) could prohibit transmitting over 320km (Q > 10). In addition, a duty cycle of less than 0.4 degrades system performance significantly.

• Photonics industry news
• /
• s.26
• /
• pp.54-59
• /
• 2005

• Convergence Security Journal
• /
• v.16 no.7
• /
• pp.3-11
• /
• 2016

With repid development of optical networking technology, Software-Defined Network (SDN) and Network Function Virtualization (NFV), high performance networking service, collaboration platform that enables collaborative research globally, drastically National Research Network (NRN) including Internet Service has changed. Therefore we compared and analyzed several world-class NRNs and took a view of future development strategy of the NRN. Also we suggest high speed security environment in super high bandwidth network with 40Gbps and 100Gbps optical transmission technology, network separation of NRN with Science DMZ to support high performance network transmission for science big data, building security environment for last-mile in campus network that supports programmability of IDS using BRO framework.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.273-280
• /
• 2007

The numerical methods for finding the optimal parameters in 640 Gbps (16 channels $\times$ 40 Gbps) WDM system with optical phase conjugator (OPC) are proposed, which effectively compensate the distorted overall WDM channels. The considered optimal parameters are the OPC position and the dispersion coefficient of fibers. The numerical approaches are accomplished through two different procedures. One of these procedures is that the optimal OPC position is previously searched and then the optimal dispersion coefficient is searched at the obtained optimal OPC position. The other is the reverse of the above procedure. From the numerical results, it is confirmed that two optimal parameters depend on each other, but less related with the searching procedure. The methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which is a serious problem of applying the OPC into multi-channels WDM system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.1-14
• /
• 1996

Effects of the external optical feedback on the optical transmission characteristics were evaluated for 3 kinds of commercialized DFB-LD modules for 2.5Gbps optical communication systems. As a result, intensity noise induced by external optical feedback via generating the external cavity modes deteriorated the transmission performances of sthe DFB-LD modules as much as 1.5dB, 1.2dB, and 1.0dB for the maximum feedback ratio of -8.8dB which corresponds to the worst reflection along the fiber transmission line. Additional penalty of 0.5dB was occurrred when state of polarization of feedback light was adjusted. From the experiments evaluating the isolation ratio of the single polarization optical isolator, decrease of the polarization dependent isolation ratio as much as 10dB from that of specification and the effective isolation ratio as much as 20dB from that of specification was mjor cause of high sensitivity of DFB-LD modules to external feedback. It was suggested that polarization independent optical isolator or single polarization optical isolator with isolation ratio specification of more than 40dB is required for 2.5Gbps DFB-LD modules with complete suppression of external feedback effects.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.103-113
• /
• 2006

The numerical methods of finding the optimal position of optical phase conjugator (OPC) and the optimal fiber dispersions are proposed, which are able to effectively compensate overall channels in $8{\times}40$ Gbps WDM system with non zero-dispersion shifted fiber (NZ-DSF) as an optical fiber. And BER characteristics in the system with two induced optimal parameters are compared with those in the system with the currently used mid-span spectral inversion (MSSI) in order to confirm the availability of the proposed methods. It is confirmed that two optimal parameters depend on each other, but less related with the searching procedure. The methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which is a serious problem but the condition in the case of applying the OPC into multi-channels WDM system.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.50-58
• /
• 2007

In this paper, the optimum position of optical phase conjugator (OPC) and the optimal dispersion coefficients of fiber sections in $16{\times}40$ Gbps WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1,000 km are induced, in order to expand the availability of mid-span spectral inversion (MSSI) technique in long-haul multi-channel transmission systems. It is confirmed that the compensation degrees of overall WDM channels are more improved by applying the induced optimal parameters into WDM system than those in WDM system with the conventional MSSI. So it is expected that the proposed optimal parameters should alternate with the forming method of the symmetrical distributions of optical power and local dispersion with respect to OPC, which generate a serious problem in the applying OPC into multi-channels WDM system if it is not formed. It will be possible to realize the flexible system design by applying the methods proposed in this paper into the real WDM system with OPC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1123-1131
• /
• 2005

In this paper, optimal position of optical phase conjugator (OPC) for best compensating distorted WDM channels due to both chromatic dispersion and self phase modulation (SPM) in $8{\times}40$ Gbps WDM systems is numerically investigated, and the eye opening penalty (EOP) and bit error rate (BER) characteristics of overall WDM channels at this position is investigated, comparing with that in case of OPC placed at mid-way of total transmission length. It is confirmed that the compensation extents in WDM system with OPC is more improved by the shifting OPC position from the mid-way of total transmission length, depending on the modulation format and fiber dispersion coefficient. Ant it is confirmed that, from a viewpoint of the reception performance, EOP of each channel is more or less different with one another, but the BER characteristics of overall channels are almost equal.