• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.1
• /
• pp.37-44
• /
• 2005

본 논문에서는 멀티 코드 CDMA(Code Division Multiple Access)시스템에서 고속의 멀티미디어 서비스를 지원하기 위해 정보 데이터열을 QAM(Quadrature Amplitude Modulation) 부호화하는 방법을 제안한다. 송신 구조는 입력 비트를 정진폭 다중부호 이진직교 변조(Constant amplitude code biorthogonal modulation: 이하 CACB라 칭함)로 부호화하여 전송 심볼의 크기를 일정하게 하고 이렇게 이진화된 신호를 QAM 부호화하여 전송속도를 높인다. 복조기의 구조는 수신된 신호로부터 QAM 연판정기 블록을 거쳐 생성된 신호를 CACB 복호화기를 거쳐 데이터를 복조해 낸다. 제안된 시스템은 기존의 멀티 코드 방식에 비해 대역폭 효율을 크게 개선시킬 수 있어 전송 속도를 많이 향상시킬 수 있고, 멀티 코드 방식을 기반으로 하기 때문에 디지털 가전기기나 3세대 이동통신과, WPAN과 관련된 무선 네트워크 응용과 같은 미래의 고속의 무선 멀티미디어 서비스를 지원하기에 적합하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.467-474
• /
• 2007

MB-OFDM (Multiband-orthogonal frequency division multiplexing) UWB (ultra wide band) system uses DCM (dual carrier modulation) scheme to achieve high-data rate transmission. The basic idea of DCM is that to transmit the 4 bits more reliably two 16-QAM (quadrature amplitude modulation) symbols are used and the two 16-QAM sysmbols are allocated to each subcarrier of OFDM with maximum-distance. In the case of using the DCM, if one 16-QAM symbol is broken by deep fadding channel, a receiver can detect the transmitted signal by using another 16-QAM symbol. In the conventional ML(maximum likelihood) decision scheme, since the receiver does not use the CSI (channel state information), loss in diversity can not be reduced. In this paper, we propose improved soft-decision scheme with CSI for higher performance of MB-OFDM UWB systemn.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2121-2130
• /
• 2015

In this paper, we analyze LM-MIMO (load-modulation multiple-input multiple-output) system with single RF chain. And then, we confirm that load modulation technique can support generation of high-order m-PSK modulation and m-QAM modulation in LM-MIMO system. Finally we evaluate performance of LM-MIMO system with load modulation. Conventional MIMO system requires a number of RF chains for expansion of MIMO dimension. A number of RF chains can cause various problems. On the other hand, although LM-MIMO system is expanded, LM-MIMO system requires single RF chain only. Therefore, LM-MIMO system has low-complexity and low power consumption. As results, we can confirm that load modulation of T-model can modulate high-order m-PSK and m-QAM singal. Also, we can confirm that $4{\times}4$ LM-MIMO system using load modulation has a similar performance to conventional $4{\times}4$ MIMO system.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.158-162
• /
• 2012

In this paper, we propose a wireless modem, which used OFDM/64QAM method and the ISM band with 2.4GHz radio frequency. In this paper proposed the case of a modem, the main program to process the baseband processor, processing speed, operating voltage, and reliability should be ensured. So we have designed with Ralink's RT2870, witch was used for Wi-Fi solution. The RT2870 provides full support for wireless LAN standard, and supports various modulation formats, 2.4GHz and 5GHz bands, both of which support chip. In this paper, we also output the modulated signal transmitted wirelessly to the 2.4GHz band RF RT2850 chip processing was applied and using 40MHz band 2.422 ~ 2.462GHz wireless bands were designed to occupy. By applying bi-directional transmission between wireless transmitter and receiver, it can be effectively connected with any kinds of wireless LAN with 2.4GHz ISM band. Therefore it could economically be used as peripheral equipments for POS system or personal wireless device based on Android platform.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.635-642
• /
• 2000

We have been derived theoretically the SER's and CLP's of Wireless ATM (WATM) cells employing an OFDM/16QAM modulation scheme in wireless channel modeled as a frequency selective Rayleigh fading channel. The amount of the performance improvement of WATM- OFDM/16QAM systems adopting various coding techniques has been evaluated. In frequency selective Rayleigh fading channel, considering CLP : $10^{-3}$ as a criterion, it is observed that the performance improvement of about 14 dB is obtained in terms of $E_b/N_o$ by employing an OFDM scheme. It is also confirmed that convolutional coding technique gives better performance than the other coding techniques. Especially, when the convolutional codes are adopted to WATM-OFDM/16QAM systems, voice transmission services are sufficiently available with 5 dB of $E_b/N_o$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.210-218
• /
• 2010

In order to improve the efficiency of frequency bandwidth, various modulation methods such as QAM and PSK have been widely used, and their variation APSK(Amplitude Phase Shift Keying) type modulation methods were proposed and are being used in some satellite communication systems. In this paper, a new constellation method named as $4L^2$-APSK is proposed, which places symbol points circularly as the existing APSK constellations do, but has different number of points and different distance between adjacent points on each layer. An equation for error probability in AWGN channel is also induced for $4L^2$-APSK. In addition, a new Gaussian noise channel is proposed in which noise variances are in the amplitude and in the phase and the two are not equal, and a method of obtaining error probabilities in this channel is also suggested. The equations for error probabilities are verified by computer simulations, and error probabilities of $4L^2$-APSK and QAM are analyzed and compared in the AWGN channel and the proposed noise channel, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.99-104
• /
• 2015

This paper proposes the RMMA (Region based Multiple Modulus Algorithm) algorithm that is possible to improving the performance of MMA adaptive equalization algorithm in order to the reduction of intersymbol interference occurs at the communication channel. In RMMA algorithm, the output constellation of equalizer are divided by 4 different regions in order to get the error signal for adapting the channel characteristic, and the small error signal is obtained by mapping each region to 4-QAM signal. The conversion effect of constant modulus from nonconstant modulus signal was obtained. In this paper, the adaptive equalization performance of proposed RMMA were evaluated comared to the present MMA. As a result of computer simulation, the convergence speed and residual quantity were improved in residual isi and MD. Especially the superiorities of robustness was confirm in SER performance compared to present MMA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1153-1160
• /
• 2005

OFDM/OQAM(Offset QAM)-IOTA system requires the IOTA(Isotropic Orthogonal Transform Algorithm) function that has superior localization property in time and frequency domain instead of guard interval used for conventional OFDM/QAM system to be robust to multipath channel. Therefore, OFDM/OQAM-IOTA system has more spectral efficiency than conventional OFDM/QAM system. But, when channel estimation scheme for conventional OFDM/QAM system is applied straightforwardly to OFDM/OQAM-IOTA system, an intrinsic Inter- symbol-Interference is observed. So suitable preamble structure for the channel estimation scheme of OFDM/OQAM-IOTA system is required. In this paper, we propose a new preamble structure that is appropriate to OPDM/OQAM-IOTA system and then perform ideal channel estimation and practical channel estimation in low-to-medium mobile speed and compare them with conventional OFDM/QAM system. Simulation results show that OFDM/OQAM-IOTA system with proposed preamble structure has 1.5 dB Eb/NO gain on Target BER $10^{-3}$ and about $25\%$ transmission rate gain against the conventional OFDM/QAM system considering quarter of FFT size as guard interval size.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.195-204
• /
• 2014

In this paper, we propose an automatic modulation classification method for ten digitally modulated baseband signals, such as 2-FSK, 4-FSK, 8-FSK, MSK, BPSK, QPSK, 8-PSK, 16-QAM, 32-QAM, and 64-QAM based on higher order statistics of cyclostationary process. The first order cyclic moments and higher order cyclic cumulants of the signal are used as features of the modulation signals. The proposed method consists of two stages. At the first stage, we classify modulation signals as M-FSK and non-FSK using peaks of the first order cyclic moment. At the next step, we apply the Gaussian mixture model-based classifier to classify non-FSK. Simulation results are demonstrated to evaluate the proposed scheme. The results show high probability of classification even in the presence of frequency and phase offsets.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.111-116
• /
• 2018

This paper compare the adaptive equalization performance of RMMA (Region-based MMA) and SCA (Square Contour Algorithm) in order to minimize the intersymbol interference that is occurred in communication channel when transmit the multilevel QAM signal. The RMMA used for improving the performance by translate to 4-level constant modulus and stability in current MMA algorithm, and the SCA used for the improving the performacne by combines the current CMA and RCA algorithm. These algorithms are aimed to improving the equalization peformance by applying the differenct principle each other in multilevel QAM signal, its different performance were compared by computer simulation in the same channel environment. For this, the output signal constellation of equalizer, residual isi, maximum distortion were applied in performance index. As a result, RMMA have more fairly good in every performance index such as signal point clustering capabilities and convergence speed compared to SCA. It is confired that the equalization noise due to misadjumstment was reduced in RMMA than SCA.