• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.487-493
• /
• 1998

Camera calibration is the process of determining the coordinate relationship between a camera image and its real world space. Accurate calibration of a camera is necessary for the applications that involve quantitative measurement of camera images. However, if the camera plane is parallel or near parallel to the calibration board on which 2 dimensional objects are defined(this is called "ill-conditioned"), existing solution procedures are not well applied. In this paper, we propose a neural network-based approach to camera calibration for 2D images formed by a mono-camera or a pair of cameras. Multi-layer perceptrons are developed to transform the coordinates of each image point to the world coordinates. The validity of the approach is tested with data points which cover the whole 2D space concerned. Experimental results for both mono-camera and stereo-camera cases indicate that the proposed approach is comparable to Tsai's method［8］. Especially for the stereo camera case, the approach works better than the Tsai's method as the angle between the camera optical axis and the Z-axis increases. Therefore, we believe the approach could be an alternative solution procedure for the ill -conditioned camera calibration.libration.

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.69-74
• /
• 2011

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV image. UV camera developed a $6.4[^{\circ}]{\times}4.8[^{\circ}]$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. UV camera to measure the discharge count and the UV image was developed, compared with a commercial camera, there was no significant difference. In salt spray environments breakdown voltage was lower than the normal state, thereby discharging the image was rapidly growing phenomenon.

• Journal of Radiation Protection and Research
• /
• 제37권4호
• /
• pp.191-196
• /
• 2012

한양대학교에서는 핵물질 탐지를 위해 고에너지 감마선원 영상화에 적합한 이중산란형 컴프턴 카메라의 원형을 개발하였다. 이중산란형 컴프턴 카메라는 높은 영상해상도를 제공하지만, 기존의 단일산란형 컴프턴 카메라보다 상대적으로 영상감도가 낮다는 한계가 있다. 이에 본 연구에서는 개발된 이중산란형 컴프턴 카메라에 단일산란형 컴프턴 카메라의 기능을 추가함으로써 하나의 시스템에서 두 가지 모드로 작동하는 이중모드 컴프턴 카메라(고민감도(단일산란형)모드와 고해상도(이중산란형)모드)에 대한 개념설계와 이에 대한 최적화 설계를 수행하였다. 최적화된 시스템에서 고민감도 모드는 고해상도 모드에 비해 전 에너지 영역에서 약 100배 정도 높은 고유영상감도를 제공하는 것으로 평가되었으며, 고해상도 모드에서 영상해상도는 기존의 이중산란형 컴프턴 카메라와 거의 같은 결과를 보여 고해상도 영상을 제공하는 것으로 나타났다.

• 방송공학회논문지
• /
• 제16권4호
• /
• pp.602-613
• /
• 2011

본 논문에서는 단안 디지털 카메라(주 카메라)에 크기와 성능이 다른 이종의 보조 카메라 모듈을 추가하여 스테레오 영상을 획득하고 활용하는 이종 스테레오 카메라 시스템을 제안한다. 이종 스테레오 카메라는 보조 카메라로 휴대폰 카메라와 같이 상대적으로 크기가 작고 저가인 카메라를 사용함으로써 스테레오 카메라의 제작 단가를 낮추고 크기를 줄일 수 있는 장점이 있다. 그러나 주 카메라와 보조 카메라 모듈로부터 획득한 이종 스테레오 영상은 영상의 화각, 해상도 등이 서로 다르기 때문에 이종 스테레오 영상을 스테레오영상으로 변환하는 과정이 필요하다. 제안한 시스템은 이종 스테레오 카메라의 기하학적 분석을 통해 이종 스테레오 영상을 일반 스테레오 영상으로 변환하는 이종 스테레오 영상 정합 알고리즘을 수행한다. 실험 결과로 정합을 통하여 얻은 스테레오 영상의 품질을 분석하고 응용 기술을 제시함으로써 제안 시스템의 성능과 활용성을 평가한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.106-110
• /
• 2002

4S-Van is being developed in order to provide the spatial data rapidly and accurately. 4S-Van technique is a system for spatial data construction that is heart of 4S technique. Architecture of 4S-Van system consists of hardware integration part and post-processing part. Hardware part has GPS, INS, color CCD, camera, B/W CCD camera, infrared rays camera, and laser. Software part has GPS/INS integration algorithm, coordinate conversion, lens correction, camera orientation correction, and three dimension position production. In this paper, we suggest that adequate 4S-Van design is needed according to application environment from various test results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.34.4-34
• /
• 2002

1. Introduction 2. Basic Camera models and geometry 3. Projection of line widths 4. Camera calibration algorithm 5. Experimental results 6. Conclusions and future work

• 로봇학회논문지
• /
• 제15권4호
• /
• pp.350-356
• /
• 2020

Workers have been replaced by mobile manipulators for factory automation in recent years. One of the typical tasks for automation is that a mobile manipulator moves to a target location and picks and places an object on the worktable. However, due to the pose estimation error of the mobile platform, the robot cannot reach the exact target position, which prevents the manipulator from being able to accurately pick and place the object on the worktable. In this study, we developed an automatic alignment system using a low-cost camera mounted on the end-effector of a collaborative robot. Camera calibration and pose estimation methods were also proposed for the automatic alignment system. This algorithm uses a markerboard composed of markers to calibrate the camera and then precisely estimate the camera pose. Experimental results demonstrate that the mobile manipulator can perform successful pick and place tasks on various conditions.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권4호
• /
• pp.161-167
• /
• 2001

Camera calibration is very important problem in 3D measurement using vision system. In this paper is proposed the simple method for camera calibration. It is designed that uses the principle of vanishing points and the concept of corresponding points extracted from the parallel line pairs. Conventional methods are necessary for 4 reference points in one frame. But we proposed has need for only 2 reference points to estimate vanishing points. It has to calculate camera parameters, focal length, camera attitude and position. Our experiment shows the validity and the usability from the result that absolute error of attitude and position is in $10^{-2}$.

• 천문학회지
• /
• 제37권4호
• /
• pp.185-191
• /
• 2004

We have been developing a solar observing system based on a fast CCD camera 1M30P made by the DALSA company. Here we examine and present the characteristics and performance of the camera. For this we have analyzed a number of images of a flat wall illuminated by a constant light source. As a result we found that in the default operating mode 1) the mean bias level is 49 ADU/pix, 2) the mean dark current is about 8 ADU /s/pix, 3) the readout noise is 1.3 ADU, and 4) the gain is about 42 electrons/ ADU. The CCD detector is found to have a linearity with a deviation smaller than $6\%$, and a uniform sensitivity better than $1\%$. These parameters will be used as basic inputs in the analysis of data to be taken by the camera.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.250-255
• /
• 2003

The position of a 3-dimensional(3D) point can be measured by using calibrated stereo camera. To obtain more accurate measurement ,more accurate camera calibration is required. There are many existing methods to calibrate camera. The simple linear methods are usually not accurate due to nonlinear lens distortion. The nonlinear methods are accurate more than linear method, but it increase computational cost and good initial guess is needed. The multi step methods need to know some camera parameters of used camera. Recent years, these explicit model based camera calibration work with the development of more precise camera models involving correction of lens distortion. But these explicit model based camera calibration have disadvantages. So implicit camera calibration methods have been derived. One of the popular implicit camera calibration method is to use neural network. In this paper, we propose implicit stereo camera calibration method for 3D reconstruction using support vector machine. SVM can learn the relationship between 3D coordinate and image coordinate, and it shows the robust property with the presence of noise and lens distortion, results of simulation are shown in section 4.