• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1155-1165
• /
• 2000

Due to the irregularity of walking ground and the inaccuracy in trajectory control of a leg, the mechanical shock and slip on the ground can be caused in the landing and supporting legs of a walkin g robot, and the robot may lose walking stability. Especially in a jointed-leg type walking robot, those problems are much more severe than in the pantograph type since the leg-weight of the jointed-leg type walking robot is relatively heavier than that of the pantograph type in general. In order to secure the walking stability for the jointed-leg type quadrupedal robot under development in KIST(Korea Institute of Science and Technology), a balancing algorithm consisting of the leg compliance control and the body posture control is implemented in this paper, and the effectiveness of the algorithm is verified through experiments.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.301-306
• /
• 2001

In this paper, we developed a quadruped walking robot, FRAMIX-T, with insectile leg mechanism and we inspected the efficiency of it in detail. In robotics, the legs of insect type are appropriate for the stability and the agile movement. So we first performed a gait analysis using duty factor, stride, phase etc., and analyzed the stability margin to improve the stability of robot. On the basis of this research, we planned the wave gait suitable for FRAMIX-T and performed a walking experiment. From this result, we proved the high efficiency using insectile leg mechanism and the possibility of walking with improved stability and mobility.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.114-117
• /
• 2000

We developed a motion capture system to get angle data of human joints in walking mode. The data are used to coordinate the biped-walking robot developed in our laboratory. A pair of motion capture system is composed of three links with the ankle, knee, and pelvis joints. The system has six axes attached with potentiometers. We used an A/D converter was used to get digital data from joint angles. We filterd the data using the Butterworth 4th order digital filter, and simulated walking motion based on the data using the Matlab.

• Annual Conference of KIPS
• /
• 2013.05a
• /
• pp.311-314
• /
• 2013

본 논문에서는 일본의 (주) 동경전력이 공개한 후쿠시마 제 1 원자력발전소 2 호기 원자로건물 지하에 위치한 S/C (Suppression Chamber) 주변의 Vent 관 조사 동영상들을 분석하였다. S/C 는 donut (환형) 모양의 구조물로 PCV (격납용기) 와 연결된 8 개의 Vent 관을 통해 원자로의 압력을 억제한다. 후쿠시마 사고 원자로의 용융 핵연료를 인출하기 위해서는 원자로 압력용기 및 PCV에 물을 채워서 방사선 선량율을 떨어뜨려야 한다. 물을 채운 후에 누설이 되면 안되기 때문에, PCV 와 S/C 사이에 연결된 Vent 관에 대한 방사능 오염수의 누설지점을 찾는 것이 중요하다. 이를 위한 사전공정으로 (주) 도시바의 4 족보행 로봇 탑재 카메라를 이용하여 8 개 Vent 관 모두를 육안 검사하였다. (주) 동경전력이 공개한 영상을 분석한 결과 고선량 감마선에 의한 Speckle 들이 관측되었다. 본 논문에서는 이러한 Speckle 분포의 특성을 분석하여 S/C 와 PCV 를 연결하는 8개 Vent 관중 방사능 오염물질이 많은 곳을 특정하고자 하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.703-710
• /
• 2004

This paper presents discontinuous zigzag gait analysis for a newly modeled quadruped walking robot with an articulated spine which connects the front and rear parts of the body. An articulated spine walking robot can move easily from side to side, which is an important feature to guarantee a larger gait stability margin than that of a conventional single rigid-body walking robot. First, we suggest a kinematic modeling of an articulated spine robot which has new parameters such as a waist-joint angle, a rotate angle of a front and rear body and describe characteristics of gait using an articulated spine. Next, we compared the difference of walking motion of newly modeled robot with that of a single rigid-body robot and analyzed the gait of an articulated spine robot using new parameters. On the basis of above result, we proposed a best walking motion with maximum stability margin. To show the effectiveness of proposed gait planning by simulation, firstly the fastest walking motion is identified based on the maximum stride, because the longer the stride, the faster the walking speed. Next, the gait stability margin variation of an articulated spine robot is compared according to the allowable waist-joint angle.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.552-554
• /
• 1998

This paper deals with the gait generation of IWR-III using a kick action to have a walking pattern like human. For this, trajectory planning with the consideration of kick action is done in each walking step, and the coordinate transformation is done for simplifying the kinematics. Balancing motion is analyzed by FDM during the walking, By combining 4-types of pre-defined steps, multi-step walking is done. Using numerical simulator, dynamic analysis, ZMP analysis and system stability is confirmed. Walking motion is visualized by 3D- graphic simulator. As a result, trunk ahead motion effect and impactless smooth walking is implemented by experiment. Finally walking with kick action is implemented the IWR-III system.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.75-82
• /
• 2006

In this paper, we propose an optimal trajectory for biped robots to move up-and-down stairs using a genetic algorithm and a computed-torque control for biped robots to be dynamically stable. First, a Real-Coded Genetic Algorithm (RCGA) which of operators are composed of reproduction, crossover and mutation is used to minimize the total energy. Constraints are divided into equalities and inequalities: Equality constraints consist of a position condition at the start and end of a step period and repeatability conditions related to each joint angle and angular velocity. Inequality constraints include collision avoidance conditions of a swing leg at the face and edge of a stair, knee joint conditions with respect to the avoidance of the kinematic singularity, and the zero moment point condition with respect to the stability into the going direction. In order to approximate a gait, each joint angle trajectory is defined as a 4-th order polynomial of which coefficients are chromosomes. The effectiveness of the proposed optimal trajectory is shown in computer simulations with a 6-dof biped robot that consists of seven links in the sagittal plane. The trajectory is more efficient than that generated by the modified GCIPM. And various trajectories generated by the proposed GA method are analyzed in a viewpoint of the consumption energy: walking on even ground, ascending stairs, and descending stairs.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1285-1295
• /
• 2008

A research on a simulator for a side walking path of a 16 degree-of-freedom (d.o.f) biped walking robot(BWR) which is composed of 4 d.o.f upper-part body and 12 d.o.f lower-part of the body is presented. For generation of stable side walking motion, the kinematics, dynamics and the zero moment of point(ZMP) of the BWR were analyzed analytically and included in the simulator. To operate the motion simulator for stable side walking of the BWR, a graphic user interface program was developed which needs inputs for the side distance between legs, base joint angle, walking type, and walking velocity. The simulator was developed to generate joint angle data of legs for side walking, and the data are transmitted to the BWR for stable side walking. In the simulator, a new path function for smooth walking motion was proposed and applied to the simulator and actual motion of a BWR. Also for actual side walking, an algorithm for estimating backlashes of the actuating joint motors was proposed and included in the simulator. To validate the performance of the proposed motion simulator, the simulator was operated and its side walking data of the simulator were generated for a period of side walking.