• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.25-30
• /
• 2005

The 4-bar linkage is the simplest model for the simulation of a retractable landing gear. In general, a designer uses a commercial software to design a linkage, which requires tedious iterations to obtain a good solution. By applying synthesis methodology the iteration process can be reduced remarkably. However, most of solutions obtained using synthesis process may not be an optimized solution. In this study, the characteristics of the optimization solution domain has been analyzed so that an optimization process can be adapted easily to a synthesis process.

• Current Industrial and Technological Trends in Aerospace
• /
• v.4 no.2
• /
• pp.13-24
• /
• 2006

국제민간항공기구(ICAO)의 차세대 항행시스템(new CNS/ATM) 전환계획에 따라 전 세계적으로 항공통신, 항법, 감시 및 항공교통관리 분야의 항행안전시설과 대응되는 항공기 탑재시스템의 변화가 진행되고 있다. 특히 항공통신과 감시 분야에서는 공대지 데이터링크 기술을 활용한 새로운 항공교통서비스(CPDLC, ADS, ADS-B, FIS-B, TIS-B)가 도입되어 공역 처리능력을 제고하고 항공운항 안전에 기여하며 조종사와 관제사의 편의성을 대폭 향상시킬 것으로 기대되고 있다. 현재 민간항공에서 활발히 이용되고 있는 대표적인 데이터링크 기술인 ACARS 시스템은 국제민간항공기구가 표준화하여 제정한 VDL 기술로 대체되고 있으며 HFDL, Mode S, AMSS, UAT 등이 현재 가용한 데이터링크 기술로 개발되어 활용되고 있다. 미국과 유럽을 중심으로 관련 기술에 대한 검증과 시범 운용 사업이 활발하게 진행되고 있으며 2020년 이후를 대비한 미래 항공통신 신기술 연구에도 세계가 매진하고 있다. 본 논문에서는 현재까지 개발된 공대지 데이터링크 기술의 특성을 개관하고 관련 응용기술 구현 현황과 데이터링크 관련 세계의 미래 통신기술 연구 동향을 제시하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2031-2037
• /
• 2011

The French doors have the advantage that they can use inner space more efficiently due to without of partition between two rooms. However, when they are used for refrigerators, the door gaskets for sealing may cause interference of themselves during opening and closing, which causes fatal effect on sealing by worn out of the gaskets as well as increases door opening force. This research proposes a new mechanism for the French doors using the parallelogram motion of 4-bar linkage mechanism, which does not make any interference between gaskets. We manufactured the French doors of proposed mechanism to verify that they do not cause any interference during opening and closing, as well as opening force is decreased. The use of our developed mechanism is not limited to refrigerators, but can be extended to other industrial products with the French doors.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.737-752
• /
• 1992

Analysis of elasto-dynamic deformation of flexible linkage mechanism is conducted using the finite element method. The equations of motion of the system are derived from the static structural problem in which dynamic inertia, gravitational and driving forces are treated as external loads. Linear spring model is included in the formulation of equation of motions to represent the effects of deformation of elastic bearings of revolute joints on the system behavior. A computer program is constructed and applied to analyze a specific crank-lever 4-bar mechanism. The algorithm of the program is as follows. First, the natural frequencies and the mode shapes of the system are calculated by solving the eigenproblem of the mechanism system which can be considered as a static structure by assuming the input shaft (crank shaft) to be fixed at any given configuration of mechanism. And finally, the elasto-dynamic deformation of the whole system is obtained using mode superposition method for the case of constant input speed. The effect of geometric stiffness on the mechamism is included in the program with the axial forces of links obtained through the quasi-static displacement analysis. It is found that the geometric stiffness exerts an important effect upon the elasto-dynamic behavior of the flexible linkage mechanism. Elastic deformation of bearing lowers the natural frequencies of the system, resulting smaller elastic displacement at the mid-point of the links and bigger elestic displacement at the ends of the links than rigid bearing. The above investigation of flexible linkage mechanism shows that the effects of the elastic deformation of bearing on the mechanism should be considered to design the mechanism which satisfies more preciously the purpose and the condition of design.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.515-520
• /
• 2020

The design and actual implementation of the four-bar parallel link was studied in the paper. The parallel four-section link is widely used as a basic kinematic mechanism for transmitting the rotation of one axis to the rotational motion of the other axis. However, the parallel 4 link has a problem that phase reversal occurs at the turning point during the movement. In order to prevent the link reversal, it is known that a double parallelogram-type link is formed by attaching an additional phase reversal suppression link with an offset. However, as a result of the actual fabrication experiment, the movement is not smooth at the transition point. In order to solve this problem, in this study, a link for smooth movement is added in addition to a link that provides an offset to prevent phase reversal, so that the phase reversal does not occur at a specific point when the driven shaft rotates along the drive shaft. The test result confirms the validity of our suggestion.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.4
• /
• pp.577-584
• /
• 1986

본 연구에서는 측정자가 시간과 노력을 소비하면서 3차원 연쇄기구의 공간운 동을 유추적으로 측정한 현재까지의 실험측정을 지양하고, 국내에서 구입 가능하고 염 가인 Apple II와 같은 같은 마이크로 컴퓨터 또는 마이크로프로세서를 이용, 3차원 연 쇄기구의 공간운동을 신속하고 정확하게 측정분석하는 자동 실험장치를 설계 제작한 다음, 이 장치를 일반 3차원 연쇄기구 모델에 적용 측정된 결과를 기호방정식을 이용 한 일반 연쇄기구 운동식의 이론 결과와 비교 검토하였다.

• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.64-71
• /
• 2008

This study is on pedestrian protection device using pneumatic cylinder and simple link mechanism when vehicle collide with pedestrian. This study ensured the safety space between engine and hood after it applies to simple link mechanism and pneumatic cylinder. It can absorb the damage which measure the specific device if vehicle collide with pedestrian. Combination of simple link mechanism and pneumatic cylinder was more superior than the present pedestrian protection device. Simple link mechanism could confirm superior height and survival probability than when only cylinder operated. It also ensured enough space between engine and hood. And if a cylinder is not working because of old cylinder, poor repair or damage of accident vertical cylinder would be difficult to execute because there exists the irregular space between engine and hood. If simple link mechanism operates with only one cylinder it could ensure the regular space because simple link mechanism set up at the middle of hood. So this device could confirm high safety for pedestrian.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.574-578
• /
• 2017

본 연구는 4절 링크 이론(four-bar likage mechanism)과 얀센 메커니즘(Jansen mechanism)을 기반으로 다관절 보행로봇을 제작하고, 로봇의 움직임에 대하여 기구학적인 해석을 제시한다. 또한 라인 트레이싱(Line tracing) 방법을 활용한 자동주행 설계를 위해 아두이노 호환 보드와 적외선 센서 4개를 보행로봇에 부착하여 자동 주행 로봇을 제작하였다.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.127-138
• /
• 2018

In this study, the operational characteristics of a domestic vegetable transplanter were investigated. The main functional components and power path of the tranplanter were analyzed. The link structure of transplanting device waskinematically analyzed, and 3D modeling and dynamic simulation were performed. Based on this analysis, the trajectory of the bottom end of the transplanting hopper was analyzed. Also, the plant spacing according to the engine speed and the shifting stage of transplanting transmission was analyzed and verified by field test. As main results of this study, the transplanting device is one degree of freedom(DOF) 4-bar link type mechanism which comprises 10 links and 13 rotating joints. The transplanting hopper plants seedlings in a vertical direction while maintaining a constant posture by the links of transplanting device. The power is transmitted to both the driving part and transplanting part from the engine, and the maximum and minimum plant spacing of the transplanting device were 428.97 mm and 261.20 mm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.730-737
• /
• 1988

Determining the robot motion using optimal technique has been studied often in recent years however the study of determining the optimal robot dimensions is very rare. In this paper, the authors attempted to find out the least driving torques at each joint as the optimization of link length refered to a 3R robot manipulator. For the given linear path with triangular velocity profile, the inverse kinematic and inverse dynamic problems are examined in order to lead into solution of problem suggested for optimal design of link lengths. Accordingly, optimal link lengths in the case of given linear path is obtained with respect to the parameter of link ratios.