• Journal of the KSME
• /
• v.25 no.3
• /
• pp.198-203
• /
• 1985

제동시 균형 문제나 약간 무거운 조향력등의 전륜구동장치을 설계하기 위한 단점들은 Negative 또는 Zero scrub Radius 의 현가장치를 가능케 하는 이론적 기술적 보완 및 해결이 되고 또한 X형 브레이크 파이프 개발로 한 회로 파열에서도 더욱 안정된 제동을 할 수 있게 된다. 따라서 (1) 중. 소형 승용차에서 절대적 비중을 차지하고 있는 실내 유효공간을 훨씬 크게할 수 있는 점 (2) 후륜구동에 비해 손쉽고 갑싸게 4륜 독립 현가장치가 가능하기 때문에 승차감에서 탁월한 개선이 이루어 진다는 점 (3) 우수한 직진(방향) 안정성과 선회성능을 얻을 수 있는 점 (4) 경량화 및 전동(轉動) 손실 감소에 따른 연비 향상 등의 커다란 장점으로 전륜구동차는 기술적인 면에서 후륜구동차에 비하여 그 격을 달리하고 있으며 몇 년 전부터 모든 자동차 회사가 신규 설계 개발중인 차는 전륜구동차로 밝혀지고 있으며 사용자의 전륜구동차에 대한 선호도는 계속 크게 증가할 것으로 보인다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.578-584
• /
• 2015

In this study a moving platform for a mobile robot that can be traveling with a full automatic standing arm was developed. Conventional mobile robots generally may equip 4 wheels or 3 wheels with a caster wheel or independent driven wheels and have good statistic stability. When a mobile robot travels on a sharply perpendicular and narrow crossroad, it may need a special steering scheme such as going forward and backward repeatedly or it is sometimes physically impossible for the robot to go through the crossroad because of the size limit. The upright running mobile robot changes its posture to the upright posture which has a small planar area and is able to go through the crossroad. The upright control which was manually performed step by step before such as sequences of uprighting (returning), checking, and balancing, is now automated.

• Journal of Drive and Control
• /
• v.11 no.2
• /
• pp.16-21
• /
• 2014

The purpose of this paper is to construct a control algorithm for improving the driving efficiency of 4-wheel-drive in-wheel electric vehicles. The main parts of the vehicle were modeled and the input-output relations of signals were summarized using MATLAB/Simulink. A performance simulator for 4-wheel-drive in-wheel electric vehicles was developed based on the co-simulation environment with a commercial dynamic behavior analysis program called Carsim. Moreover, for improving the driving efficiency of vehicles, a torque distribution algorithm, which distributes the torque to the front and rear wheels, was included in the performance simulator. The effectiveness of the torque distribution algorithm was validated by the SOC simulation using the FTP-75 driving cycle.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.218-225
• /
• 1995

In this paper, a mechanical analysis model for steep-slope log-skidding operations of a rubber-tired tractor is discussed and the applicability of the model is investigated. The model largely consists of mathematical analysis models for log drag, dynamic vehicle weight distributions and soil-vehicle traction. For the case study, a theoretical data set for log skidding operations is used in investigating the effect of the factors influencing the results of mechanical analysis or the productivity of skidding operations. The analyses include 1) the effect of log choking methods on tangential log-skidding force, 2) the effects of the change in travel speed and log load on the required input power to the wheels and 3) the log skidding performance of a two-wheel drive compared with that of a four-wheel drive.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.512-519
• /
• 2016

In this study, the tire road friction estimation(TRFE) algorithm for controlling the rear wheel driving force of a 4WD vehicle during acceleration is developed using a standard sensor in an ordinary 4WD passenger car and a speed sensor. The algorithm is constructed for the wheel shaft torque, longitudinal tire force, vertical tire force and maximum tire road friction estimation. The estimation results of shaft torque and tire force were validated using a torque sensor and wheel force transducer. In the algorithm, the current road friction is defined as the proportion calculated between longitudinal and vertical tire force. Slip slop methods using current road friction and slip ratio are applied to estimate the road friction coefficient. Based on this study's results, the traction performance, fuel consumption and drive shaft strength performance of a 4WD vehicle are improved by applying the tire road friction estimation algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.146-147
• /
• 2015

현재 선박이나 교각 해양플랜트는 많은 철판으로 구성이 되어 있다. 특히 해양플랜트와 선박에는 오랜시간 바다에 있으므로 각종 해양생물들이 붙어 번식을 한다. 이러한 해양생물은 선박의 속도 및 연료 소모에 상당한 영향을 미친다. 그러므로 선박이나 해양플랜트 구조물은 정기적으로 벽면에 서식하는 해양생물을 제거하고 있으며 이러한 제거과정과 도장을 다시하는 과정에서 작업자들에게 위험이 따른다. 본 연구는 선박이나 해양플랜트와 같은 철로된 구조물의 위험한 작업을 대신할 로봇의 기반인 철판 벽면을 이동하는 로봇을 연구하였다. 현재 많은 벽면 로봇들이 연구되고 있다. 영구자석 또는 전자석 휠을 사용하거나 공압을 이용하여 수직벽면에서 작업을 한다. 특히 공압 방식을 많이 사용하였는데 수직벽면에 로봇이 밀착될 만큼 강한 공압이 필요하게 되기 때문에 부가적인 장치가 많이 필요하다. 본 논문에서는 부가적인 장치를 최소화하고 효과적인 동작을 하기위해 전자석 방식을 선택 하였으며 간편하게 선박의 수직벽면을 작업할 수 있는 전자석 방식의 4 륜 로봇을 개발하고자 한다. 선박의 수직벽면 작업용 4 륜구동 로봇을 전자석을 이용하여 수직벽면에 부착할 수 있도록 설계하였으며 자력의 세기와 방향을 제어하여 로봇이 선박의 수직면에 밀착되어 자유롭게 이동이 가능하도록 개발 하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.275-276
• /
• 2012

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.4
• /
• pp.42-50
• /
• 1993

This paper was proposed drive strategy Induction Motor using the fuzzy algorithm of auto-tuning PID control. In fuzzy control, the 1M driving system is controlled in trial and error without the mathematical modeling and using fuzzy lookup table the real time control is possible. Also, ,dividing the fuzzy rules in several zone, the stability and response of the 1M driving system is improved. The parameters of 1M are varying according to the environmental conditions, the variance of the parameters is affected with the driving characteristics of 1M. Using the fuzzy algorithm of the driving system which has the auto tuning control function for high performance, high accuracy of the driving system, a designed and proposed through the comparision with the PID control method and the driving characteristics is reviewed and analyzed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.750-751
• /
• 2023

현재 로봇 배달 서비스의 실외 상용화를 위해 다양한 주행 환경에 대한 최적화 연구가 진행되고 있습니다. 본 논문에서는 비평탄 지형에 안정적인 주행이 가능하며, 효율적인 장애물 극복을 위한 로봇 구조를 제시합니다. 본 연구에서는 기존 다리-바퀴 방식을 통한 장애물 극복 로봇과 비교 연구를 진행하며 모터 구동 토크의 이론적인 계산 비교, 모의실험을 통한 검증으로 로봇 설계안의 성능을 평가합니다. 이 연구를 통해 고안한 로봇의 동작을 설명하며, 4륜 주행 로봇의 혁신적인 장애물 극복 설계 방법을 제안합니다.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.179-184
• /
• 2018

The driving methods of car are front wheel drive, rear wheel drive and four wheel drive. At driving methods, constant velocity joint is the most important part at carrying out two functions for converting to the direction which the driver wants and transferring the power to wheels. At driving on the road, the impact can be applied to the parts transmitting power according to the state of road surface. In this study, each models of three constant velocity joints whose shaft length are different respectively were modelled with CATIA and the structural and fatigue analyses were carried out by using ANSYS. This study result is thought to be the useful material at designing the constant velocity joint with the durability against impact. And it is possible to be grafted onto the convergence technique at the design of constant velocity joint and show the esthetic sense.