• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.418-425
• /
• 1998

In this paper. determination method of turn-off angle in the SRM drives is proposed to maintain the high torque at a any turn-on angle, which is realized by using selHuning control method, During the sampling time. a number of P pulses from encoder are checked by using one-chip microprocessor. and compared with pre-checked a number of pulses A After calculating difference between two data, the turn-off angle moves forward or backward direction by the self-tuning m method, As repeating such process, the optimal turn-off angle is determined and the maximum torque is maintained T Though experiments, it is observed that motor speed is almost maintained if turn-off angle is adjusted automatically by s selHuning method when turn-ηn angle is changed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.117-124
• /
• 2002

This study was carried out to investigate variation of heavy metal contents for feed materials during composting and to evaluate the effect of pre-treatment methods on heavy metal analysis. Dry ashing, $HNO_3-HClO_4$, aqua-regia, HCl reflux, $HNO_3-HClO_4-HF$, autoclaving methods of $HNO_3$, HCl, and $HNO_3(2+1)$ were used as pre-treatment for heavy metal analysis. In analyzing standard material SRM 2781, recovery efficiencies of pre-treatment methods were 50-60% for Cr and Zn, >100% for Ni, and 80-90% for Cd and Cu. Recovery efficiency of dry ashing for SRM 2781 was the lowest. In composting raw material, Cd concentration by autoclaving methods was 3 to 4 times higher than the other methods and recovery efficiency of dry ashing was also the lowest. During composting, Cd content was the highest in autoclaving. Cr and Cu concentrations were the lowest in dry ashing and aqua-regia, respectively. Variation coefficients of Pb and Zn between pre-treatment methods were generally low.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.4
• /
• pp.367-373
• /
• 2014

The most common current controller for the Switched Reluctance Motor (SRM) is the hysteresis controller. This method, however, suffers from such drawbacks as variable switching frequency, consequent audible noise and high current ripple. These disadvantages make this controlling method undesirable for many applications. The alternative solution is the PI controller. Since the fixed gain PI current controller can only be optimized for one operating point, and on the other hand, SR motor is highly nonlinear, PI controller gain should be adjusted according to incremental inductance. This paper presents a novel method for PI current controller gain adaptation which is simple and yields a good performance. The proposed controller has been implemented on a test bench using a eZdsp F28335 board. The performance of the current controller has been investigated in both simulation and experimental tests using a four-phase 8/6 4KW SRM drive system.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.302-306
• /
• 2009

A trace amount of boron in steel significantly influences its mechanical and physical properties. A prompt gamma ray activation analysis (PGAA) method is used to measure boron in low alloy steel samples of KRISS 101-01-C21~C26. NIST SRMs of 362, 364, 1761 and 1767 serve as the control standards to validate the measurement method. The measured values of the NIST SRMs are consistent with their certified values within the expected uncertainties, except for that of NIST SRM 362. Experimental uncertainties are evaluated according to the guidelines given by the International Organization for Standardization (ISO). The expanded uncertainties are calculated with a coverage factor of 2, at approximately 95% confidence level. The calculated relative expanded uncertainties of boron mass fractions are between 3% and 7% at the mg/kg level. The results are compared with the results measured by the solvent extraction-inductively coupled optical emission spectrometry (ICP/OES) method.

• Journal of Hydrogen and New Energy
• /
• v.23 no.3
• /
• pp.213-218
• /
• 2012

Steam reforming of methane (SRM) is the primary method to produce hydrogen. Commercial Ni-based catalysts have been optimized for SRM with excess steam ($H_2O/CH_4$ > 2.5) at high temperatures (> $700^{\circ}C$). However, commercial catalysts are not suitable under severe conditions such as stoichiometric steam over methane ratio ($H_2O/CH_4$ = 1.0) and low temperature ($600^{\circ}C$). In this study, 15wt.% Ni catalysts supported on $Ce_{0.8}Zr_{0.2}O_2$ were prepared at various calcination temperatures for SRM at a very high gas hourly space velocity (GHSV) of $621,704h^{-1}$. The calcination temperature was systematically varied to optimize 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst at a $H_2O/CH_4$ ratio of 1.0 and at $600^{\circ}C$. 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst calcined at $500^{\circ}C$ exhibited the highest $CH_4$ conversion as well as stability with time on stream. Also, 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst calcined at $500^{\circ}C$ showed the highest $H_2$ yield (58%) and CO yield (21%) among the catalysts. This is due to complex NiO species, which have relatively strong metal to support interaction (SMSI).

• Journal of Integrative Natural Science
• /
• v.8 no.4
• /
• pp.258-266
• /
• 2015

Xanthine Oxidase is an enzyme, which oxidizes hypoxanthine to xanthine, and xanthine to uric acid. It is widely distributed throughout various organs including the liver, gut, lung, kidney, heart, brain and plasma. It is involved in gout pathogenesis. In this study, we have performed Comparative Molecular Field Analysis (CoMFA) on a series of 2-(indol-5-yl) thiazole derivatives as xanthine oxidase (XO) inhibitors to identify the structural variations with their inhibitory activities. Ligand based CoMFA models were generated based on atom-by-atom matching alignment. In atom-by-atom matching, the bioactive conformation of highly active molecule 11 was generated using systematic search. Compounds were aligned using the bioactive conformation and it is used for model generation. Different CoMFA models were generated using different alignments and the best model yielded a cross-validated $q^2$ of 0.698 with five components and non-cross-validated correlation coefficient ($r^2$) of 0.992 with Fisher value as 236.431, and an estimated standard error of 0.068. The predictive ability of the best CoMFA models was found to be $r^2_{pred}$0.653. The CoMFA study revealed that the $R_3$ position of the structure is important in influencing the biological activity of the inhibitors. Electro positive groups and bulkier substituents in this position enhance the biological activity.

• Clinics in Shoulder and Elbow
• /
• v.4 no.2
• /
• pp.173-180
• /
• 2001

Aim: To evaluate validity and responsiveness of four shoulder scoring systems. Material and Method: Twenty-five cases of shoulder instability(22 traumatic, 3 non-traumatic) and twenty-three cases of rotator cuff tear(12 small or medium, 10 large or massive) treated surgically were evaluated with the Shoulder Function Score of the University of Pennsylvania(Penn FS), Constant Score, UCLA Shoulder Rating Scale and Simple Shouler Test(SST), preoperatively and at final follow-up. The average follow-up was 16.0 months in instability group and 17.5 months in rotator cuff tear group. Using the SPSS program, Pearson linear correlation coefficiency(PLCC) between the scores were calculated. And to assess the construct validity, PLCC between patients' satisfaction and the scores were also calculated. Responsiveness was measured by the standardized response mean(SRM). Result: In instability group, correlation between the scoring systems was low preoperatively except between Constant and SST, but high after operation. Patients' satisfaction with the scores showed low PLCC preoperativley, but high PLCC postoperatively. SRM was high in PENN and UCLA, but when the satisfaction segment of the score was eliminated from UCLA, the SRM was the lowest. In rotator cuff tear group, there was high correlation between the scores not only preoperatively but postoperatively. And the patients' satisfaction matched well with the scores. SRM was particularly high in UCLA and SST. Even when satisfaction segment was eliminated from UCLA, the SRM was still the highest. Conclusion : Evaluation by the 4 scoring systems investigated in the study showed less consistency in instability than rotator cuff tear in terms of correlation and validity. Responsiveness was generally higher in rotator cuff tear group than in instability group except for Pennsylvania Shoulder Function Score. Therefore it is construed that use of any among the four scoring systems doesn't make difference in evaluation of rotator cuff lesions. However in instability group, care is needed because different result may be obtained according to the selection of a scoring system.

• Analytical Science and Technology
• /
• v.20 no.1
• /
• pp.33-40
• /
• 2007

This study centered on the quantitative analysis of about 27 trace elements including toxic ones using instrumental neutron activation analysis of fine ambient particulate matter in the third and fourth industrial complex area of Daejeon city, Korea. For analytical quality control, the certified reference material (NIST, the National Institute of Standards and Technology, U.S.A., SRM 2783, air particulate on filter media) was used. The errors relative to SRM values of Sb, Mn, V, Mg, Na, K, Ti, Co, Zn, and Sm fell below 5%, while those of Cr, Fe, Ba, Th, Ce, Al, and Cu were less than 10%. From the results of the quantitative analysis, the concentration of toxic metals such as As, Mn, Se, V, and Zn were $3.26{\pm}2.72$, $9.86{\pm}4.71$, $2.18{\pm}1.25$, $4.91{\pm}2.41$, $158{\pm}78ng/m^3$, respectively. And the results of factor analysis indicated that there are no more than six factors of sources of fine ambient particulate with statistical significance in the study area.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.219-221
• /
• 1996

A reluctance motor is a electric machine in which torque is produced by the tendency of its movable part to move to a position where the inductance of the excited winding is maximized. This means physical fact that the energy stored in the field tend to be minimized as the energy stored in the field is converted the mechanical work. In this paper, we have studied the characteristics of the electromagnetic energy conversion about SRM which have 6 stator and 4 rotor poles with 3 phase. In addition we design the fundamental model of SRM with requirements(e.g. power, speed) and simulate with PC-SRD.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.212-216
• /
• 1998

For a Switched Reluctance Motor(SRM) drive, the important things are 1) reducing torque ripple, 2) improving efficiency, 3) sensorless speed control, 4) accurate position. The position information impotant for the efficiency and smoothness drives. Since SRMs characteristics are nonlinear. It is difficult to estimated phase current in saturation region. This paper describes a method for indirect sensing of the rotor position in SRM which use both voltage and current. The method obtains rotor position by using unconducting phase. The information about the rotor position is achieved by differentiating the unconducting phase current or the voltage gradient. And then, this paper presents a torque control with indirect rotor position detection methods. This torque control is achieved by developing a detailed nonlinear model of the motor.