• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.4
• /
• pp.423-430
• /
• 2005

This study was investigated with sample digestion techniques and a reliability of the analytical results for a quantitative analysis of a standard reference material ('urban particulate matter', SRM 1648). The metallic elements were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) with closed vessel microwave acid digestion method and atomic absorption spectroscopy (AAS). Quality control of the overall analytical procedures for metallic element determinations of standard reference material were estimated by analysis of a SRM 1648. Three digestion solutions $(type\;1:\;HNO_3,\;type\;2:\;HNO_3\;and\;H2O_2(4'1)\;mixture,\;type\;3:5.55\%\; HNO_3\;and\;16.75\%\;HCI\;mixture)$ were applied to SRM 1648. As a result, three digestion solutions used in this study are completely unable to digest Cr of SRM 1648. Reliability of Cr and As showed some errors in the digestion with digestion solution type (3) due to the influence of chlorides. Type (3) digestion solutions are sufficient to fulfill the digestion of As as well as Se in SRM 1648. ICP-MS results showed the improvement in accurate and precise determination of some trace elements like Cd, V and Pb in SRM 1648. It is important to use the proper digestion solution for each element to qualify analytical precision.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.40-44
• /
• 2013

This paper presents a design and characteristics analysis of novel 2-phase 4/3 switched reluctance motor (SRM) with short flux path for an air-blower application. The desired air-blower is unidirectional application, and requires a wide positive torque region without torque dead-zone. In order to get a wide positive torque region without torque dead-zone during phase commutation, asymmetric inductance characteristic with non-uniform air-gap is considered. The proposed motor could be started at any rotor position with high efficiency drive. The proposed 2-phase 4/3 SRM is verified by finite element method analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.3
• /
• pp.205-212
• /
• 2007

This paper presents a direct instantaneous torque control (DITC) of Switched Reluctance Motor (SRM) with a novel 4-level converter to develop a uniform torque and to improve a dynamic performance. The DITC method can reduce a high torque ripple of SRM. Drive efficiency and dynamic performance with conventional drive are low due to a slow excitation current build-up. Since the 4-level converter can obtain an addition boosted voltage to have a fast excitation and demagnetization, it can Improve dynamic performance and efficiency easily. To apply the DITC technique to a 4-level converter, a novel control scheme is presented according to the operating modes. Additionally, selection of capacitances of boosted capacitor and efficiency improvement of 4-level converter are analyzed. At last, the validity of proposed method is verified by some computer simulations md comparative experiments.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.347-353
• /
• 2012

Design and analysis of a novel 2-phase 4/5 Switched Reluctance Motor(SRM) is presented. The proposed motor employs a novel stator pole configuration. A novel SRM employs four-rotor and five-stator poles. The motor has no dead-zone and can be operate at any rotor position. The structure and operating principle are also described. The comparison between the proposed motor and a conventional two-phase 4/2 SRM is undertaken in this analysis. Furthermore, the Finite Element Analysis(FEA) and matlab-simulink are used to predict and simulate the performance of a proposed motor. The results of investigation indicate that the proposed structure offers a better performance in term of torque production.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.46-52
• /
• 1998

This paper describes a current-shaping method for the production of constant torque of SRM under the nonlinear magnetic saturation condition. A current detection technique in the inductance increasing region and an approximation technique for modeling of nonlinear inductance profile are adopted. In the proposed system, a single switching angle control and voltage control is used to shape the current waveform for the generation of flat torque at any given load condition. Finally the validity of the proposed method was verified using a constructed 3HP 6/4 SRM.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.151-154
• /
• 1999

This paper presents a driving method of 3-phase 4-poles SRM(switched reluctance motor) drived by switching angle control. In this study, the switching angle is determined from approximated analysis and computer simulation by using MATLAB for high efficiency according to the speed and torque required by load, and then microcontroller controls the switching angle of asymmetrical inverter in SRM driver. Also, we experiment the maximum forque driving and maximum power driving by controlling switching angle available to electric vehicle.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.240-248
• /
• 1999

This paper presents the application of fuzzy algorithm for speed control of Switched Reluctance Motor. SRM has a h highly nonlinear control characteristic and operates in saturation to maximize the motor torque. A systematic approach t to the modeling of highly nonlinear SRM drive system which includes the fuzzy controller with coarse control and fine C control is presented. PelfOlmance analysis of SRM dJive is reported for a wide range of operating conditions through s speed variation and load perturbation dynamics. The pelfOlmance indices of SRM drive system operating with fuzzy 1 logic controller are compared with the conventional controller to highlight the merits. The expel1mental results are p presented to confilm the validity of proposed fuzzy 10밍c controller.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.61-65
• /
• 2002

RM(Switched Reluctance Motor)＇s Torque is generated by phase-current and inductance profile. A new analytical concept is proposed to determine the turn-off angle for maximization of the torque output. This paper describes a new method to maximization the average torque of a current control Switched Reluctance Motor. It is based on the simplified turn-off angle equation using least square method. Simulations carried out on a three-phase 6/4 pole SRM justify the algorithm is described. The suggested maximization average torque is verified by simulation in this paper.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.328-330
• /
• 1995

In this paper, several inverter power circuit that are suitable for switched reluctance motor(SRM) drives are analyzed and compared with each other, Because the converter choice depends on the motor design, the analysis and selection are done for 6/4 SRM. Not considered in this paper is another class of inverter topologies for motor with bifilar windings. The proposed converter is applied to 3phase, 6/4 SRM.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.248-250
• /
• 2005

This paper suggests a new type of 4-switch inverter for switched reluctance motor drives. 4-switch Inverter topology is studied to provide possibility for the realization of cost of 3-phase SRM drive system. We used Y-connection and two-phase exciting method. For effective utilization of the developed system, a direct current controlled PWM scheme is designed and implemented to produce the desired dynamic. We solve to balance the neutral point of Y-connection by the direct current controlled PWM and examine the performance of proposed system. With the algorithm and developed control scheme, is expected that the proposed system can be widely used in commercial applications with a reduced system cost.