• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.401-408
• /
• 2009

This study is performed to check the three dimensional characteristics of residual stress in the dissimilar metal weld. Although two dimensional analysis has been widely used for the assessment of weld residual stress, it has limitations to understand the stress distribution of the third direction. 3-D analysis was done to understand residual stress distribution of the welded plate. A simple butt-welded plate was considered to show the stress variation on all direction. A mock-up plate weldment was fabricated with SA-508 and F316L, which are widely used in nuclear power plants. The analysis results were validated with the measured values in the mock-up.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.14-21
• /
• 2001

To estimate crack growth rate and cycle ratio uniquely, many investigators have developed various kinds of mechanical parameters and theories. But, thes have produced local solution space through single parameter. Neural Networks can perform patten classification using several input and output parameters. Fatigue damage model by neural networks was used to recognize the relation between da/dN/N/N(sub)f, and half-value breadth ratio B/Bo, fractal dimension D(sub)f, and fracture mechanical parameters in 2024-T3 aluminium alloy. Learned neural networks has ability to predict both crack growth rate da/dN and cycly ratio /N/N(sub)f within engineering estimated mean error(5%).

• Bulletin of the Korean Chemical Society
• /
• v.10 no.3
• /
• pp.282-288
• /
• 1989

Theoretical analysis of DF-$CO_2$ transfer chemical laser is performed through simple kinetic model consisting of 30 chemical reactions. In this model, we calculate the power theoretically by solving the rate equations, which are related to the $D_2\;+\;F_2$ chain reaction and the DF-$CO_2$ resonance energy transfer, combined with both the gain processes and the stimulated emission processes. The calculated powers are verified with previously reported results in good agreements. The output energy rises linearly with the increase in pressure, and the duration time of output pulse show the inverse dependence on pressure. Through the detailed calculation of temperature and concentrations of reactants as a function of time, it is found that the deactivation processes of DF(v) can be neglected in low pressure, but they have to be considered in high pressure. From the parametric study for the variation on [$D_2]/[F_2$] and [$CO_2]/[D_2\;+\;F_2$] at several constant total pressure, the optimum lasing conditions are found to be in a range of 1/3 to 1 and 2 to 4, respectively.

• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.93-98
• /
• 2004

The structure of C_{28}H_{41}N_4O_4Br\;{\cdot}\;2H_2O$ has been determined by X-ray deffraction methods. The crystal system is triclinic, space group Pl, unit cell constants, a=9.000(1) $\AA$, b=9.312(3) $\AA$, c=9.344(2) $\AA$, $\alpha=89.37(20)^{\circ},\;\beta=68.81(3)^{\circ},\;\gamma=84.70(4)^{\circ},\;V=726.7(8){\AA},\;T=298K,\;Z=1,\;D_c=1.402Mgm^{-3}$. The intensity data were collected on an Enraf-Nonius CAD4 Diffractometer with graphite monochromated $MoK\alpha$ radiation $(\lambda=0.71073\;{\AA}$. The molecular structure was solved by direct methods and refined by full-matrix least squares to a final $R=5.95\%$ for 2521 unique observed $F_0>4\sigma(F_0)$reflections and 370 parameters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.105-111
• /
• 2004

In this paper, millimeter-wave high gain and broadband MHEMT cascode amplifiers were designed and fabricated. The 0.1 ${\mu}{\textrm}{m}$ InGaAs/InAlAs/GaAs Metamorphic HEMT was fabricated for cascode amplifiers. The DC characteristics of MHEMT are 640 mA/mm of drain current density, 653 mS/mm of maximum transconductance. The current gain cut-off frequency(f$_{T}$) is 173 GHz and the maximum oscillation frequency(f$_{max}$) is 271 GHz. By using the CPW transmission line, the cascode amplifier was designed the matched circuit for getting the broadband characteristics. The designed amplifier was fabricated by the MHEMT MIMIC process that was developed through this research. As the results of measurement, the 1 stage amplifier obtained 3 dB bandwidth of 37 GHz between 31.3 to 68.3 GHz. Also, this amplifier represents the S21 gain with the average 9.7 dB gain in bandwidth and the maximum gain of 11.3 dB at 40 GHz. The 2 stage amplifier has the broadband characteristics with 3 dB bandwidth of 29.5 GHz in the frequency range from 32.5 to 62.0 GHz. The 2 stage cascode amplifier represents the high gain characteristics with the average gain of 20.4 dB in bandwidth and the maximum gain of 22.3 dB at 36.5 GHz.z.z.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.299-311
• /
• 2011

The objective of this paper is to present a methodology for the classification of spatial patterns considering the parameters of urban form which play a significant role in the formation of the urban climate. The urban morphological parameters, i.e. building coverage, impervious pavement, vegetation, water, farmland and landuse types were used to classify the spatial patterns by a K-means cluster analysis. And the presented methodology was applied on Changwon city, South Korea. According to the results of cluster analysis, the total spatial patterns were classified as 24 patterns. First of all, The spatial patterns(A-1, A-2, A-3, B-1, B-2, B-3, C-1, C-2, C-3, D-1, D-2, D-3, E-1, E-2, E-3, F-1, F-2, F-3, G-1, G-2, G-3), which distributed in the rural area and the suburban area, can have the positive impacts of cold air generation and wind corridor on an urban climate environment, were distributed in the rural area. On the other hand, the spatial patterns of the downtown area including A-4, B-4, C-4 and D-4 are expected to have the negative impacts on urban climate owing to the of artificial heat emission or the wind flow obstruction. Finally, it will require the future research to analysis the climatic properties according to the same spatial patterns by the field survey.

• Journal of the Chungcheong Mathematical Society
• /
• v.20 no.2
• /
• pp.117-137
• /
• 2007

We establish the Hyers-Ulam-Rassias stability of the Pexiderized mixed type quadratic equation $f_1(x+y+z)+f_2(x-y)+f_3(x-z)-f_4(x-y-z)-f_5(x+y)-f_6(x+z)=0$ in the spirit of D. H. Hyers, S. M. Ulam and Th. M. Rassias.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.299-306
• /
• 2022

In this study, derivatives of trimethoxybenzene were investigated as inhibitors of melanogenesis. We examined the effects of methyl 3,4,5-trimethoxybenzoate (MTB), ethyl 3,4,5-trimethoxybenzoate (ETB), methyl 3,4,5-trimethoxycinnamate (MTC), and ethyl 3,4,5-trimethoxycinnamate (ETC). First, the inhibitory effects of these agents on melanin production were evaluated using α-melanocyte-stimulating hormone (α-MSH)-stimulated B16F10 melanoma cells. We found that all derivatives decreased α-MSH-induced melanin production in B16F10 melanoma cells; ETC showed a strong inhibitory effect at half of the concentration of the other derivatives. As tyrosinase is considered a key enzyme of melanogenesis, we also examined whether the derivatives inhibited tyrosinase activity. MTC and ETC reduced mushroom tyrosinase activity and expression levels of α-MSH-induced B16F10 cellular tyrosinase protein. Inhibitory effects of all derivatives on α-MSH-induced B16F10 cellular tyrosinase activity were shown in a dose-dependent manner. Additionally, the derivatives were exposed to diphenylpicrylhydrazyl free radical to examine their antioxidant characteristics. All derivatives showed considerable antioxidant activity, which was 2-fold higher than that of arbutin. In conclusion, the trimethoxybenzene derivatives, including MTB, ETB, MTC, and ETC exerted anti-melanogenic and antioxidant effects on α-MSH-stimulated melanogenesis, demonstrating their potential for use as novel hypopigmenting agents and antioxidants.

• Korean Journal of Food Science and Technology
• /
• v.19 no.5
• /
• pp.397-402
• /
• 1987

Two lipoxygenases (F-I and F-II) were purified from potato tubers by ammonium sulfate fractionation and ion-exchange column chromatographies. The purified isoenzymes were apparently homogeneous on polyacrylamide gel electrophoresis. Both enzymes showed a similar optimum pH of 5.5-6.0. From thermal inactivation experiments with the purified enzymes in the range of 50 to $65^{\circ}C$, D-values of 13.3 min and 4.3 min at $65^{\circ}C$, and z-values of $11.8^{\circ}C\;and\;10.3^{\circ}C$ were obtained respectively for F-I and F-II. By applying absolute reaction rate equation, thermodynamic parameters wire also determined for the activation part of the inactivation process.