• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.828-832
• /
• 2013

To report country-specific carbon and nitrogen stocks data in a pear orchard by Tier 3 approach of 2006 IPCC guidelines for national greenhouse gas inventories, an experimental pear orchard field of the Pear Research Station, National Institute of Horticultural & Herbal Science, Rural Development Administration, Naju, Korea ($35^{\circ}01^{\prime}27.70N$, $126^{\circ}44^{\prime}53.50^{\prime\prime}E$, 6 m altitude), where 15-year-old 'Niitaka' pear (Pyrus pyrifolia Nakai cv. Niitaka) trees were planted at a $5.0m{\times}3.0m$ spacing on a Tatura trellis system, was chosen to assess the total amount of carbon and nitrogen stocks stored in the trees and orchard soil profiles. At the sampling time (August 2012), three trees were uprooted, and separated into six fractions: trunk, main branches, lateral branches (including shoots), leaves, fruits, and roots. Soil samples were collected from 0 to 0.6 m depth at 0.1 m intervals at 0.5 m from the trunk. Dry mass per tree was 4.7 kg for trunk, 13.3 kg for main branches, 13.9 kg for lateral branches, 3.7 kg for leaves, 6.7 kg for fruits, and 14.1 kg for roots. Amounts of C and N per tree were respectively 2.3 and 0.02 kg for trunk, 6.4 and 0.07 kg for main branches, 6.4 and 0.09 kg for lateral branches, 6.5 and 0.07 kg for roots, 1.7 and 0.07 kg for leaves, and 3.2 and 0.03 kg for fruits. Carbon and nitrogen stocks stored between the soil surface and a depth of 60 cm were 138.29 and $13.31Mg{\cdot}ha^{-1}$, respectively, while those contained in pear trees were 17.66 and $0.23Mg{\cdot}ha^{-1}$ based on a tree density of 667 $trees{\cdot}ha^{-1}$. Overall, carbon and nitrogen stocks per hectare stored in a pear orchard were 155.95 and 13.54 Mg, respectively.

• KDI Journal of Economic Policy
• /
• v.39 no.3
• /
• pp.19-41
• /
• 2017

This paper examines the aspects of changes in China's consumer market since the mid-1980s. By comparing urban and rural residents' expenditures, I find that the rural consumer market has exhibited extraordinary growth. Over the past decade, the consumption growth rate and average propensity to consume by rural residents have surpassed those of their urban counterparts, with the former's consumption patterns becoming increasingly similar to the latter's. Such a phenomenon prevails in rural areas which neighbor second-and third-tier cities where urbanization is progressing rapidly. These findings imply that Korean companies need to diversify their export goods in line with China's expanding rural markets while further differentiating their product composition to satisfy the heterogeneous demands in urban areas. With regard to the government, efforts must be made to strengthen the export cooperative system so that it targets not only urban but also rural markets in China.

• ALGAE
• /
• v.22 no.3
• /
• pp.159-165
• /
• 2007

Morphological and anatomical characters of Amphiroa rigida Lamouroux were investigated with field materials and taxonomic accounts are given to the species. The species grows in the subtidal zone of Cheju island, and is characterized by semiendophytic habit in Hydrolithon onkodes. The species is well defined by about 1 cm height, loosely tufted thallus with irregular branches, two-tiered geniculum with equal length, geniculum tier connecting by oblique end walls, and conceptacles buried in cortices of intergeniculum. Korean isolates have etrasporangial, male and female conceptacles. The structure and developmental patterns of conceptacles are very similar to those shown in previous studies.

• Annual Conference of KIPS
• /
• 2000.10a
• /
• pp.613-616
• /
• 2000

본 논문에서, 웹브라우져상에서 병행 객체들의 상태 정보 및 정보흐름을 보여주는 분산 병행 객체 모니터링 시스템의 설계에 관하여 기술하였다. 병행 객체는 UNIX의 쓰레드와 같이 CPU에 의해서 스케줄링 되어진다. 또한 모니터링 시스템을 설계해서, 분산환경에서의 병행 객체의 정적 및 동적정보를 수집하여, 웹브라우져상에 이 정보를 표시하고자 한다. 그리고, 설치한 모니터링 시스템을 동적 라이브러리로 구현하고, 기존의 UNIX 또는 SROS상에서 실행되도록 구현할 것이다.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.4 s.33
• /
• pp.89-97
• /
• 2006

Usually, amenity elements coexist with disamenity elements in rural villages. Through the literature reviews and group discussion of participant research staffs in this study, a tentative classification system of amenity and disamenity elements was pro-posed with 4-tier hierachial order; for amenity, 3-7-29-76(numbers of the high, medium to low categories and elements) and 3-6-16-32 for disamenity. finally, through case studies of 4 sample villages representing the flat-plan, upland, seashore and periurban rural areas, the applicability of this classification system was verified.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.363-369
• /
• 2024

In this paper, we develope a LOB(Limit Order Book) analyzing tool for an automated trading system, which features real-time and offline analysis of LOB data in conjunction with execution data. The 10-tier LOB data analyzer developed in this paper, which contains ask/bid prices and the execution data, receivs transaction requests in real-time from the Kiwoom Open API+ server. In the OnReceiveTrData event, the transaction data from the server is received and processed. The real-time data, triggered by the transaction, is received and processed in the OnReceiveRealData event. These two types of data are stored in a database and replayed in the same way as if it were a real-time situation in simulation mode. The LOB data are selectively read and analyzed in a necessary time points. The tool provides various features such as bar chart analysis and pattern analysis of the total shares on the bid side and ask side, which are used to develop a tool to accurately determine the timing of stock trading.

• Journal of information and communication convergence engineering
• /
• v.20 no.2
• /
• pp.137-142
• /
• 2022

Monolithic three-dimensional (M3D) logics such as M3D-NAND, M3D-NOR, M3D-buffer, M3D 2×1 multiplexer, and M3D D flip-flop, consisting of modularized M3D inverters (M3D-INVs), have been proposed. In the previous M3D logic, each M3D logic had to be designed separately for a standard cell library. The proposed M3D logic is designed by placing modularized M3D-INVs and connecting interconnects such as metal lines or monolithic inter-tier-vias between M3D-INVs. The electrical characteristics of the previous and proposed M3D logics were simulated using the technology computer-aided design and Simulation Program with Integrated Circuit Emphasis with the extracted parameters of the previously developed LETI-UTSOI MOSFET model for n- and p-type MOSFETs and the extracted external capacitances. The area, propagation delay, falling/rising times, and dynamic power consumption of the proposed M3D logic are lower than those of previous versions. Despite the larger space and lower performance of the proposed M3D logic in comparison to the previous versions, it can be easily designed with a single modularized M3D-INV and without having to design all layouts of the logic gates separately.

• Journal of Internet Computing and Services
• /
• v.6 no.4
• /
• pp.125-139
• /
• 2005

Mobile e-business is in wide use with the rapid growth of wireless internet users. To meet the growing requests for mobile e-business the productivity of mobile applications has been demanded. The WAPSiteGen, introduced in this paper, automatically generates a 3-tier WAP application that needs a new application database or that already has an application database to increase the productivity. The WAPSiteGen generates the EJB components that handle business logic and the JSP Web components that process user-made queries and the WAP Push feature. For a presentation layer, it also generates the HTML forms for an application manager and the WML decks for end users, which consists of many cards. The WAPSiteGen enhances extendibility, reusability and portability of generated 3-tier applications by comprising such component technologies as EJB and JSP. Furthermore, it supports the WAP Push services for generated applications that provide necessary information to wherever and at whenever a user wants. Since the applications generated by the WAPSiteGen provide the information on an interested entity as well as the information on all the directly or indirectly related entities to the interested one, it shows faster information accessibility. In this paper, we explain the functionality and implementation of the WAPSiteGen and then show its merits by comparing the WAPSiteGen to commercial WAP application generators.

• Journal of information and communication convergence engineering
• /
• v.14 no.1
• /
• pp.40-44
• /
• 2016

The device coupling between the stacked top/bottom field-effect transistors (FETs) in two types of monolithic 3D inverter (M3INV) with/without a metal layer in the bottom tier is investigated, and then the regime of the thickness T_ILD and dielectric constant ε_r of the inter-layer distance (ILD), the doping concentration N_d (N_a), and length L_g of the channel, and the side-wall length L_SW where the stacked FETs are coupled are studied. When N_d (N_a) < 10¹⁶ cm^-3 and L_SW < 20 nm, the threshold voltage shift of the top FET varies almost constantly by the gate voltage of the bottom FET, but when N_d (N_a) > 10¹⁶ cm^-3 or L_SW > 20 nm, the shift decreases and increases, respectively. M3INVs with T_ILD ≥ 50 nm and ε_r ≤ 3.9 can neglect the interaction between the stacked FETs, but when T_ILD or ε_r do not meet the above conditions, the interaction must be taken into consideration.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.186-192
• /
• 2014

Monolithic three-dimensional integrated chips (3D ICs) are an emerging technology that offers an integration density that is some orders of magnitude higher than the conventional through-silicon-via (TSV)-based 3D ICs. This is due to a sequential integration process that enables extremely small monolithic inter-tier vias (MIVs). For a monolithic 3D memory, we first explore the static random-access memory (SRAM) design. Next, for digital logic, we explore several design styles. The first is transistor-level, which is a design style unique to monolithic 3D ICs that are enabled by the ultra-high-density of MIVs. We also explore gate-level and block-level design styles, which are available for TSV-based 3D ICs. For each of these design styles, we present techniques to obtain the graphic database system (GDS) layouts, and perform a signoff-quality performance and power analysis. We also discuss various challenges facing monolithic 3D ICs, such as achieving 50% footprint reduction over two-dimensional (2D) ICs, routing congestion, power delivery network design, and thermal issues. Finally, we present design techniques to overcome these challenges.