• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.8-19
• /
• 2019

Since their emergence in 2007, smart phones have advanced up to the point that 5G mobile communication in 2019 started to be commercialized. Accordingly, now it is possible to share 3D modeling files and collaborate by means of a mobile web. As the recently commercialized 5G mobile communication network is so useful in sharing 3D modeling files and collaborating that even large-size geometry files can be transmitted at ultra high speed with ultra low transfer delay. We examines characteristics of major 3D file formats such as STL, OBJ, FBX, and glTF and compares the existing 4G LTE (Long Term Evolution) network with the 5G NR (New Radio) mobile communication network. The loading time and packets of each format were measured depending on the mobile web browser environments. We shows that in comparison with 4G LTE, the loading time of STL and OBJ file formats were reduced as much as 6.55 sec and 9.41 sec, respectively in the 5G NR and Chrome browsers. The glTF file format showed the most efficient performance in all of the 4G/5G mobile communication networks, Chrome, and Edge browsers. In the case of STL and OBJ, the traffic was relatively excessive in 5G NR and Edge browsers. The findings of this study are expected to be utilized to develop a 3D file format that reduces the loading time in a mobile web environment.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.29-33
• /
• 2015

In this paper, we propose the method to improve the performance of the antenna system that contains three bands, such as Lte3G, WLAN and Lte4G. This antenna has an advantage that can cover the three different frequency bands 2.1GHz, 2.4GHz and 2.6GHz through one antenna design. The design and simulations are done using CST Microwave Studio 2014 program. The antenna is designed by using the FR-4 (lossy) substrate with the dielectric constant of er=4.3 and dielectric loss tangent 0.025. The substrate dimensions are the following; Thickness[h] is 1.6mm, Length is 90mm, and Width is 40mm. The ground is designed by using the PEC material with h=0.035mm. The patch is designed by using the copper with h=0.035mm. In the near future, we will fabricate the antenna, which we have designed, and then apply this antenna to the mobile communication system. And we will test this mobile communication system for the diverse environments.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.781-794
• /
• 2023

Uncrewed aerial vehicles (UAVs) have become a vital element in nonterrestrial networks, especially with respect to 5G communication systems and beyond. The use of UAVs in support of 4G/5G base station (uncrewed aerial vehicle base station [UAV-BS]) has proven to be a practical solution for extending cellular network services to areas where conventional infrastructures are unavailable. In this study, we introduce a UAV-BS system that utilizes a high-capacity wireless backhaul operating in millimeter-wave frequency bands. This system can achieve a maximum throughput of 1.3 Gbps while delivering data at a rate of 300 Mbps, even at distances of 10 km. We also present the details of our testbed implementation alongside the performance results obtained from field tests.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.25-30
• /
• 2020

This study is to provide high-quality mobile communication service to subscribers and wireless communication users in a Mobile communication environment. It is about a method to secure the quality of a call by early processing a faulty radio station. The purpose of this study is to design and implement a direction detection system suitable for a mobile communication environment and portable as a method for early detection and resolution of interference and illegal wireless stations occurring in 5G mobile communication. The basic configuration of a portable direction detection system was designed, and a method was proposed to find and repair a faulty wireless station in a short time through manufacturing and experimentation.

• Electronics and Telecommunications Trends
• /
• v.36 no.6
• /
• pp.13-24
• /
• 2021

Industrial networks has been developing various technologies from fieldbus technology to industrial Ethernet and time-sensitive networking. The industry expects that the 5G mobile network will solve the diverse and highly specific industrial site requirements. Accordingly, 3GPP has been developing standard functions to provide ultra-high reliability, ultra-high speed, ultra-connection, and ultra-low latency services, and 3GPP Rel-16 began developing ultra-low latency and ultra-high reliability communication functions for 5G mobile networks to support vertical industries. In this paper, we show the related standardization trends and requirements to apply industrial IoT service scenarios to 5G mobile networks, and in particular, we introduce 5G system features and extended 5G system architecture to provide time sensitive communication and time synchronization services.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.10-18
• /
• 2007

Today, third-generation(3G) of mobile communication service executing the video and TV. And low cost, high speed data rate will emerge communication of the fourth generation(4G) in future. So, in this paper we studied occupied frequency bandwidth of common technique criteria among the technique criteria for the 4G mobile communication of FDD-based on Up/Down-link. The mobile communication traffic is predicted Up/Down-link of non-symmetric in future. So we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. We also verified this through the simulation. We proposed the occupied frequency bandwidth for the 4G mobile communication in this paper.

• Asian Journal of Innovation and Policy
• /
• v.2 no.2
• /
• pp.150-172
• /
• 2013

This paper wanted to find out research trends and its determinants on mobile commerce research reviewing 439 articles from 1999, the starting year of this field to 2012. Our analytical framework has 4 categories such as general, technology, consumer and firm, and 14 sub-categories. The results are as follows: First, studies on mobile commerce can be divided into 5 stages. Second, trends of mobile commerce are closely related to the evolution of mobile technologies such as communication technologies and devices (2G, 3G, 3G+, 4G LTE, LTE-A). Third, this field was led by USA until 2005 and has been led by Taiwan after 2006. Fourth, China, Korea, UK and Canada are also leading countries, all of which have mobile device manufacturers. Research trends of non-manufacturing countries and manufacturing countries are different from each other. In addition, the trends of leading countries are different from each other reflecting each country's business needs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.353-358
• /
• 2018

We herein analyze the service traffic characteristics and spectrum of the 5G mobile communication and suggest the effective 5G network deployment method for 5G mobile communication services. The data rates of the 5G mobile communication are from several kbps (voice and IoT) up to 1 Gbps (hologram, among others). The 5G mobile communication services show the diverse cell coverage environments owing to the use of diverse service data rates and multiple spectrum bands. To effectively support the 5G mobile communication services, the network deployment requires the optimization of the service coverages for new service environments and multiple spectrum bands. Considering the 5G spectrum bandwidth debated at present, if the 5G services of 100 Mbps can be supported in the 200 m cell edge using the 3.5 GHz spectrum bands, the 5G services of the 1 Gbps hologram and 500-Mbps 4k UHD can be supported in the cell edges of 50 m and 100 m using the 28 GHz spectrum bands. Therefore, the 5G services can be supported effectively by the 5G network deployment using spectrum portfolio configurations to match the diverse 5G services and multiple bands.

• Journal of information and communication convergence engineering
• /
• v.20 no.1
• /
• pp.8-15
• /
• 2022

The new 5G radio technology (NR) can provide ultra-reliable low latency communications. The supporting 5G network infrastructure will move away from the previous point-to-point network architecture to a service-based architecture. 5G can provide three new things, i.e., wider channels, lower latency and more bandwidth. These will allow 5G to support three main types of connected services, including enhanced mobile broadband, mission-critical communications, and the massive Internet of Things (IoT). In 2015, the 5th generation (5G) mobile communication was officially approved by the International Telecommunication Union (ITU) as IMT-2020. Since then, 3GPP, the international organization responsible for 5G standards, is actively developing specifications for 5G technologies. 3GPP Release 15 provides the first full set of 5G standards, and the evolution and expansion of 5G are now being standardized in Release 16 and 17, respectively. This paper provides an overview of 3GPP 5G technologies and key services.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1672-1678
• /
• 2022

In this paper, the relay antenna was designed in consideration of the performance of the 28GHz band 5G mobile communication relay horn antenna, such as radiation pattern and return loss. A horn array for 5G mobile communication repeater was designed by arranging the antenna elements in phase, and the performance was analyzed. Unlike conventional WCDMA (3G) and LTE (4G), in millimeter wave band communication, high path loss occurs between transmission and reception. In the design of a 5G millimeter wave horn antenna, antenna performance such as isolation and gain between antenna elements as well as gain and bandwidth of the antenna must be additionally considered. The antenna gain of the single horn antenna (1×1) and the array horn antenna (2×4) in the 28GHz band is about 10.44d Bi and 19.58dBi, respectively, and the return loss is designed to be less than -18dB. It has proven its validity and has been shown to be suitable for application to 5G mobile communication relay system.