• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.117-124
• /
• 2014

The effect of various process variables on the powder properties of recycled $U_3O_8$ from MnO-$Al_2O_3$ doped large grain $UO_2$ pellets and the effect of those recycled $U_3O_8$ powders on the sintered density and grain size of MnO-$Al_2O_3$ doped large grain $UO_2$ pellets have been investigated. The evolution of morphology, size, and BET surface area of the recycled $U_3O_8$ powders according to the respective variation of the thermo-mechanical treatment variables of oxidation temperature, powder milling, and sequential cyclic heat treatment of oxidation and then reduction was examined. The correlation between the BET surface area of recycled $U_3O_8$ powder and the sintered pellet properties of MnO-$Al_2O_3$ doped pellets showed that the pellet density and grain size of doped pellets were increased and then saturated by increasing the BET surface area of the recycled $U_3O_8$ powder. The density and grain size of the pellets were maximized when the BET surface area of the recycled $U_3O_8$ powder was in the vicinity of $3m^2/g$. Among the process variables applied in this study, the cyclic heat treatment followed by low temperature oxidation was a potential process combination to obtain the sinter-active $U_3O_8$ powder.

• 한국세라믹학회지
• /
• 제39권2호
• /
• pp.153-158
• /
• 2002

습식법에 의하여 제조된 $Al_2O_3$-1∼11 wt% $TiO_2$계 복합체를 1350$^{\circ}C$, 1450$^{\circ}C$ 에서 2시간 열처리 한 후 이에 대한 기계적 물성변화 및 미세구조를 조사하였다. 그 결과, $TiO_2$ 첨가량이 3 wt%였을 때의 복합체가 bulk density도 높고 기공율도 낮은 치밀한 미세구조를 이루었으며 이 때 young's modulus는 35.5 GPa, 곡강도값은 68.7 MPa로서 다른 $TiO_2$ 첨가량에 비하여 우수한 물성을 나타내었다. $TiO_2$ 첨가량이 증가할 수록 많은 양의 aluminium titanate의 합성으로 인해 열팽창 계수는 낮은 값을 나타내었다.

• Ocean Systems Engineering
• /
• 제6권1호
• /
• pp.61-97
• /
• 2016

This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.226-228
• /
• 2007

During asymmetrical cold rolling in AA 5052 sheet a reduction per a rolling pass was varied to investigate the effect of the ratio of the contact length between the roll and sample ($l_c$) to the sheet thickness (d) on the formation of shear textures. In order to intensify the shear deformation during asymmetrical rolling, AA 5052 sheet was asymmetrically cold rolled without lubrication by using different roll velocities of upper and lower rolls. Asymmetrical rolling with $l_c$/d=1.8 led to the formation of texture gradients throughout the sheet thickness in which the outer thickness layers depicted shear textures and the center thickness layers displayed a rolling texture. Asymmetrical rolling with $l_c$/d=3.1 gave rise to the formation of shear textures in the whole through-thickness layer. The strain states associated with asymmetrical rolling were investigated by the finite element method (FEM) simulation. FEM results indicated that the evolution of deformation texture in a thickness layer is strongly governed by integrated values of strain rates and along the streamline in the roll gap.

• Journal of Microbiology
• /
• 제44권6호
• /
• pp.600-606
• /
• 2006

Spore forming actinobacteria (sporoactinobacteria) isolated from soils with an acidic pH in Pinus thunbergii forests and coal mine waste were subjected to taxonomic characterization. For the isolation of acidophilic actinobacteria, acidified starch casein agar (pH adjusted to 4-5) was used. The numbers of actinobacteria growing in acidic media were between $3.2{\times}10^4$ and $8.0{\times}10^6$ CFU/g soil. Forty three acidophilic actinobacterial strains were isolated and their 16S rDNA sequences were determined. The isolates were divided into eight distinctive phylogenetic clusters within the variation encompassed by the family Streptomycetaceae. Four clusters among them were assigned to the genus Streptacidiphilus, whereas the remaining four were assigned to Streptomyces. The clusters belonging to either Streptomyces or Streptacidiphilus did not form a monophyletic clade. The growth pH profiles indicated that the representative isolates grew best between pH 5 and 6. It is evident from this study that acidity has played a critical role in the differentiation of the family Streptomycetaceae, and also that different mechanisms might have resulted in the evolution of two groups, Streptacidiphilus (strict acidophiles) and neutrotolerant acidophilic Streptomyces. The effect of geographic separation was clearly seen among the Streptacidiphilus isolates, which may be a key factor in speciation of the genus.

• 천문학회보
• /
• 제40권1호
• /
• pp.79.3-80
• /
• 2015

Galaxy overdensities such as galaxy clusters and superclusters are the largest gravitationally bound systems in the Universe. Since they contain many different levels of local densities, they are excellent places to test galaxy evolution models in connection to the environments. The environment studies of galaxies at z ~ 1 are important because the environmental quenching seems to be an important mechanism to reduce star formation activities in galaxies at z < 1. However, there have been not many studies about high redshift galaxy clusters at z ~ 1 because of the lack of wide and deep multi-wavelength data. We have used the multi-wavelength data from the UKIDSS DXS (J and K band), the SWIRE (4 IRAC bands), and the PAN-STARRS (g, r, i, z, y bands) in the ELAIS-N1 field. We identified galaxy cluster candidates at 0.2 < z < 1.6 using the multi-wavelength data. We found several superclusters where cluster candidates are concentrated on few tens of Mpc scale. Interestingly, some of the supercluster candidates consist of galaxy clusters which have high blue galaxy. We will present high redshift galaxy cluster and supercluster candidates in ELAIS-N1 field and galaxy properties in different environments including dense clusters and fields.

• 천문학회보
• /
• 제38권2호
• /
• pp.48.2-48.2
• /
• 2013

To understand the connection between active galactic nuclei (AGNs) and star formation, we investigated the relation between AGN bolometric and far-infrared (FIR) luminosities, using type-2 AGNs. By matching type-2 AGNs at z < 0.3 selected from the SDSS based on the emission-line diagnostics, against the AKARI/FIS All-Sky Survey Catalogue and the COSMOS PEP (PACS Evolutionary Probe) Survey Catalogue, we obtained a sample of 729 type-2 AGNs detected in the AKARI survey ($90{\mu}m$) and 17 ones detected in the PEP survey ($100{\mu}m$). For AGN bolometric luminosities, we adopted an estimate based on the [OIII] and [OI] line luminosities. We confirmed that there is a correlation between the AGN bolometric and FIR luminosities with a large scatter, which is consistent with previous studies. However, we claim that this correlation suffers from various artificial effects, e.g., FIR detection limits, survey volumes, and so on. We will discuss the limitations of studying the connection between AGN and star formation using currently available facilities.

• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.13-25
• /
• 2018

Pedro $G{\acute{o}}mez$ Bosque footbridge is a slender and lightweight structure that creates a pedestrian link over the Pisuerga River, Valladolid, Spain. This footbridge is a singular stress ribbon structure with one span of 85 m consisting on a steel plate and precast concrete slabs laying on it. Rubber pavement and a railing made of stainless steel and glass complete the footbridge. Because of its lively dynamics, prone to oscillate, a simple and affordable structural health monitoring system was installed in order to continuously evaluate its structural serviceability and to estimate its modal parameters. Once certain problems (conditioning and 3D orientation of the triaxial accelerometers) are overcome, the monitoring system is validated by comparison with a general purpose laboratory portable analyzer. Representative data is presented, including acceleration magnitudes and modal estimates. The evolution of these parameters has been analysed over one-year time.

• Journal of Information Technology Applications and Management
• /
• 제16권4호
• /
• pp.109-134
• /
• 2009

Compared to research on the success of IT projects in general, research on the management of conflict in IT teams and its impact on project success is insufficient. This research performed a comparative study to analyze the nature and evolving phenomenon of conflicts in IT project teams. This study aimed at; First, Why a conflict is created within and around an IT project team. Second, What is the phenomenon of conflict evolution, diffusion, and/or resolution? Third, How the differences in conflict management style affects the IT project performance? Three propositions were drawn from the analysis of two intensive analysis of conflict cases and their comparison. Proposition 1 : Both 'the method of pointing out a problem' and 'the pointed-out contents' can be the trigger of conflicts around an IT project. Proposition 2 : While the focus of attention of one party is 'the method of pointing out a problem', if the other's and focus of attention of one party is 'the pointed-out contents', that is, if the focus of attention mismatch, the conflict can be amplified. Proposition 3 : According to the temporal nature of the relationship, e.g., short-term versus long-term, the way people approach and deal with the conflict differs.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 2010년도 춘계국제학술대회
• /
• pp.109-123
• /
• 2010

Compared to research on the success of IT projects In general, research on the management of conflict in IT teams and its impact on project success is insufficient. This research performed a comparative study to analyze the nature and evolving phenomenon of conflicts in IT project teams. This study aimed at; First, Why a conflict is created within and around an IT project team. Second, What is the phenomenon of conflict evolution, diffusion, and/or resolution? Third, How the differences in conflict management style affects the IT project performance? Three propositions were drawn from the analysis of two intensive analysis of conflict cases and their comparison. Proposition 1 : Both 'the method of pointing out a problem' and 'the pointed-out contents' can be the trigger of conflicts around an IT project. Proposition 2 : While the focus of attention of one party is 'the method of pointing out a problem', if the other's and focus of attention of one party is 'the pointed-out contents', that is, if the focus of attention mismatch, the conflict can be amplified. Proposition 3 : According to the temporal nature of the relationship, e.g., short-term versus long-term, the way people approach and deal with the conflict differs.