• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5895-5900
• /
• 2013

Dictamnine (Dic) has the ability to exert cytotoxicity in human cervix, colon, and oral carcinoma cells and dihydroartemisinin (DHA) also has potent anticancer activity on various tumour cell lines. This report explores the molecular mechanisms by which Dic treatment and combination treatment with DHA and Dic cause apoptosis in human lung adenocarcinoma A549 cells. Dic treatment induced concentration- and time-dependent cell death. FCM analysis showed that Dic induced S phase cell cycle arrest at low concentration and cell apoptosis at high concentration in which loss of mitochondrial membrane potential (${\Delta}{\Psi}m$) was not involved. In addition, inhibition of caspase-3 using the specific inhibitor, z-DQMD-fmk, did not attenuate Dic-induced apoptosis, implying that Dic-induced caspase-3-independent apoptosis. Combination treatment with DHA and Dic dramatically increased the apoptotic cell death compared to Dic alone. Interestingly, pretreatment with z-DQMD-fmk significantly attenuated DHA and Dic co-induced apoptosis, implying that caspase-3 plays an important role in Dic and DHA co-induced cell apoptosis. Collectively, we found that Dic induced S phase cell cycle arrest at low concentration and cell apoptosis at high concentration in which mitochondria and caspase were not involved and DHA enhanced Dic induced A549 cell apoptosis via a caspase-dependent pathway.

• Explosives and Blasting
• /
• v.38 no.2
• /
• pp.1-12
• /
• 2020

Digital Image Correlation is a well-established method for displacements, strains and shape measurements of engineering objects. Stereo-camera 3D Digital Image Correlation (3D-DIC) systems have been developed to match the specific requirements for measurements posed by material and mechanical industries. Although DIC method provides the capabilities of scaling a field-of-view(FOV), dimensions of Geotechnical structure objects in many cases are too big to be measured with DIC based on a single camera pair. It can be the most important issue with applying 3D DIC to the measurement of Geotechnical structures. In this paper, We were present stereo vision conditions in a 3D DIC system that can be measured for large FOV(30×20m) and high precisions(z-displacement 0.5mm) of the ground objects with Stereo-camera DIC systems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.617-626
• /
• 2021

During supersonic flight of vehicles, the thermal behavior of structures under high-temperature environment is important for thermal-structural design. In this study, full-field thermal deformation and stress concentration of the notched structure was performed using global-local multi-digital image correlation (multi-DIC) systems. This techniques were developed and implemented by multi-DIC systems consists of 2D DIC system and 3D DIC system. The specimen was heated in a heating chamber to achieve the thermal expansion behavior. Then the images of structure's deformation and stress concentration at various temperature were recorded and analyzed by multi-DIC system. Afterward, full-field thermal deformation of the notched structure was determined with DIC technique and stress concentration at the notched structure was calculated by further processing. Finite element analysis of the notched structure is performed in ABAQUS^TM and the results of the experiments show good agreement with those obtained from simulation. The results achieved in this study show the efficiency of the muilti-DIC method in thermal deformation as well as stress concentration of notched structure.

• Korean Journal of Microbiology
• /
• v.55 no.3
• /
• pp.191-198
• /
• 2019

H-NS binds to promoter DNA and works as a general transcription silencer. DicA protein, by binding to the promoter DNA of dicA, activates dicA expression and at the same time inhibits expression of dicF and dicB, thus, exerting cell division control in Escherichia coli. H-NS complexed with a nucleoid protein Cnu was known to be involved in dicA expression. However, the exact nature of H-NS binding to dicA promoter DNA and the consequences of H-NS binding in expression of dicA is not clear. In this study, we explored the DNA binding activity of H-NS on the promoter DNA of dicA and found that H-NS binding occurs exclusively to the dicA promoter DNA. We never observed, however, H-NS binding at the vicinity of the dicA promoter. Temperature dependent oligomerization of H-NS was observed during DNA binding and the Cnu protein enhances the oligomerization process of H-NS binding. In vivo measurement of dicA expression in an hns deleted strain showed that dicA expression increased. These results demonstrated that H-NS binds specifically to dicA promoter DNA and functions as a transcription silencer.

• Korean Journal of Microbiology
• /
• v.55 no.3
• /
• pp.181-190
• /
• 2019

In Escherichia coli, DicA protein is involved in cell division control. DicA protein is known to bind DNA better at $25^{\circ}C$ than at $37^{\circ}C$. However, the molecular cause of the temperature dependent binding is not clear. In this study, we investigated how DicA binds DNA and why its DNA binding activity depends on temperature. An unique in vivo DNA binding assay developed in this laboratory showed that unlike the homologous proteins such as RovA or SlyA, DicA uses its N-terminal domain for DNA binding. The in vivo DNA binding assay of DicA also demonstrated that the temperature-dependent DNA binding activity does not come from Cnu or H-NS that is known to bind DNA better at $25^{\circ}C$ than at $37^{\circ}C$. Electrophoretic Mobility Shift Assay (EMSA), when performed with purified DicA protein, did not show temperature-dependent DicA binding activity. However when EMSA was performed with crude protein from WT E. coli cells, temperature-dependent DicA binding activity was observed, suggesting that there is a factor(s) that confers temperature DNA binding activity of DicA in vivo.

• Electronics and Telecommunications Trends
• /
• v.3 no.4
• /
• pp.114-130
• /
• 1988

본 고에서는 GaAs DIC (Digital Integrated Circuits)의 최근 연구경향을 공정기술을 중심으로 소개한다. GaAs DIC의 역사, 공정, 설계, 집적도에 대하여 살펴봄으로써 초고속 GaAs DIC 개발의 향후 방향을 모색하고자 한다. 본 고는 1987년 SPIE지에 게재된 일본 NTT연구소의 Hirayama와 Ikegami의 논문 내용을 중심으로 편역한 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.391-397
• /
• 2017

Recently, digital image correlation (DIC) techniques have been used to measure dynamic deformation during tensile testing. The standard tensile test method measures the average displacement of the relevant specimen to calculate the true stress-strain curve. Therefore, the validity of the true stress curve is restricted to the stress incurred within the uniform stretching interval, i.e., the maximum stress corresponds to the starting point of the necking deformation. Alternatively, if DIC is used, the effective range of the strain and strain rate can be extended to the breaking point of the tensile specimen, because of the feasibility of measuring the local strain over the entire area of interest. Because of these advantages, many optical 3D measurement systems have been introduced and used in research and industry. However, the conventional 3D measurement systems are exceedingly expensive and time consuming. In addition, these systems have the disadvantage of a very large equipment size which makes their transport difficult. In this study, a 2D image correction method employing a 2D DIC measurement method in conjunction with a numerical analysis method is developed using a smartphone. The results of the proposed modified 2D DIC method yielded higher accuracy than that obtained via the 3D measurement equipment. In conclusion, it was demonstrated that the proposed 2D DIC and calibration methods yield accurate measurement results with low time costs.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.4
• /
• pp.259-273
• /
• 2021

We conducted a study to investigate the characteristics of the carbon cycle of two streams (located in Shig a Prefecture, Japan), having similar size, namely, the Adokawa stream (length: 52 km, area: 305 km², watershed population: 8,000) and the Yasukawa stream (length: 62 km, area: 380 km², watershed population: 120,000), but with different degree of human activity. Samples were collected from these two streams at 14 (Adokawa stream) and 23 (Yasukawa stream) stations in the flowing direction. The dissolved inorganic carbon (DIC) concentration and the stable carbon isotope ratio of DIC (δ¹³C-DIC) were measured in addition to the watershed features and the chemical variables of the stream water. The δ¹³C-DIC (-9.50 ± 2.54‰), DIC concentration (249 ± 76 µM), and electric conductivity (52 ± 13 µS/cm) in Adokawa stream showed small variations from upstream to downstream. However, the δ¹³C-DIC (-8.68 ± 2.3‰) upstream of Yasukawa stream was similar to that of Adokawa stream and decreased downstream (-12.13 ± 0.43‰). DIC concentration (upstream: 272 ± 89 µM, downstream: 690 ± 37 µM) and electric conductivity (upstream: 69 ± 17 µS/cm, downstream: 193 ± 37 µS/cm) were higher downstream than upstream of Yasukawa stream. The DIC concentration of Yasukawa stream was significantly correlated with watershed environmental variables, such as, watershed population density (r = 0.8581, p<0.0001, n = 23), and forest area percentage of the watershed (r = -0.9188, p<0.0001, n = 23). δ¹³C-DIC showed significant negative correlation with the DIC concentration (r = -0.7734, p<0.0001, n = 23), electric conductivity (r = -0.5396, p = 0.0079, n = 23), and watershed population density (r = -0.6836, p = 0.0003, n = 23). Our approach using a stable carbon isotope ratio suggests that DIC concentration and δ¹³C-DIC could be used as indicators for monitoring the health of stream ecosystems with different watershed characteristics.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.26-32
• /
• 2013

A digital image correlation(DIC) method is a whole-field measurement technique that acquires surface displacements and strains from images information which characterized a random speckle as intensity grey levels. Recently years, this DIC method is being developed and used increasingly in various research. In this study, we tried to apply to aluminum alloy(Al 6061-T6) using DIC method and strain gauge. DIC results demonstrated the usefulness and ability to determine a strain. The test specimen used in this study was an aluminum alloy(Al 6061-T6, thickness 1 mm). For a strain measurement, a strain gauge was attached at the center of a specimen. A specimen was lightly sprayed with a white paint and a black dot pattern was sprayed on its fully dried white surface to obtain a random speckle. The experimental apparatus used to perform the tensile test consisted of universal dynamic tester(5 kN; T.O. Co.) under displacement speed of 0.5, 1.0 and 3.0 mm/min. A Model 5100 B Scanner(V. Co.) used to obtain a strain. A CCD camera connected to a PC uses to record the images of the specimen surface. After acquisition, the images were transferred to PC where the DIC software was implemented. An acquired image was evaluated by the DIC program. DIC method for displacement and strain was suggests and it results show a good consistent remarkably. DIC results demonstrated the usefulness and ability to determine surface strain was better than by using classical measurements. The strain field measurement using a DIC is so useful that it can be applied to map strain distributions at a full area. DIC method can evaluate a strain change so it can predict a location of fracture. The findings of the investigation suggest that the DIC method is an efficient and reliable tool for full-field monitoring and detailed damage characterization of materials.

• Explosives and Blasting
• /
• v.37 no.4
• /
• pp.1-9
• /
• 2019

In this study the applicability of a Digital Image Correlation (DIC) method was investigated by measuring the displacement and vibration of rock pillar due to underground mining blasting. When combined with a high speed photography technology, the DIC method provides an excellent photographic image processing ability that can be used to convert the evolving full-field surface properties of structures to 2D or 3D set of coordinate values. The measured coordinate sets are then used to calculate the displacement, strain, and velocity of the target structure. This technique is widely used in science and engineering, and continuously finds its new application areas. In this study, the DIC system and the conventional seismograph were compared for their ability to measure the displacement and vibration produced by blasting. In the field test both methods showed similar results. Thus, it is concluded that the DIC method is feasible to measure the ground displacements and vibrations from blasting.