• 제목/요약/키워드: 3D-scan data

검색결과 394건 처리시간 0.025초

3차원 데이터를 활용한 유방유형별 형태 분석: 30대 여성을 중심으로 (Analysis of Breast Shapes through the Utilization of 3D Scan Data: A Focus on Women in the Early to Late 30s)

  • 김지민;김효숙
    • Human Ecology Research
    • /
    • 제52권5호
    • /
    • pp.509-518
    • /
    • 2014
  • This study strives to analyze the characteristics of and changes in breast shapes of women in their 30s, whose bodies start to age and whose breasts experience changes due to internal and external factors such as pregnancy, childbearing, and breast-feeding. The analysis of the indirect breast measurements for each age group (early, mid, and late 30s) demonstrates that the volume of the breasts increases proportionally with age, the breasts lose their firmness, and the nipples start to point downwards rather than to the sides. The breast shapes experience more significant changes vertically than horizontally as the breasts start to sag downwards. The composition factors of the breasts have been classified into five factors: the level of volume in the breasts and the surrounding area, the degree of sagging in the breasts, the position and vertical width of the breasts, the volume of the breasts, and the degree of width between the breasts. The breasts have been categorized into three different shapes. Breast Shape I (32.56%) appeared most frequently among women in their mid 30s, and this shape falls into the category of Sagging I, which is one of the six breast types that have been classified by the Japanese Wacoal Research Center, in addition to Korean size 80A. Breast Shape II (38.76%) appeared most frequently among women in their mid 30s, and this shape has been categorized as flat with its size being 70A. Breast Shape III (28.68%) appeared most frequently among women in their early 30s with a conical shape and size 75A.

3차원 GSO PET/CT 스캐너(Philips GEMINI PET/CT의 특성 평가 (Performance Characteristics of 3D GSO PET/CT Scanner (Philips GEMINI PET/DT))

  • 김진수;이재성;이병일;이동수;정준기;이명철
    • 대한핵의학회지
    • /
    • 제38권4호
    • /
    • pp.318-324
    • /
    • 2004
  • 목적: Philips GEMINI PET/CT 스캐너는 GSO 섬광결정을 사용해 제작된 전신용 PET/CT 스캐너이다. 이 연구에서는 NEMA에서 새롭게 제안한 NEMA NU2-2001에 따라 GEMINI PET/CT 스캐너의 공간분해능, 민감도, 산란분획, NECR 등을 평가하고 그 결과를 BGO, LSO등의 섬광결정의 특성과 비교하였다. 대상 및 방법: GEMINI는 Philips ALLEGRO PET과 MX8000 D multi-slice CT 스캐너를 결합한 PET/CT 스캐너로서 검출기는 GSO 섬광결정 ($4{\times}6{\times}20mm^3$)을 사용하였고 축방향 시야는 18 cm이다. 공간분해능. 민감도, 산란분획, NECR 등을 평가하기 위하여 PET 데이터를 획득하였다(동시계수창: 8 ns, 에너지창: $409{\sim}664$ keV). 공간분해능 측정을 위하여 축횡단면의 중심에서 1 cm, 10 cm 떨어진 지점의 각 3지점((a) x=0, y=1, (b)x=10, y=0, (c)x=0, y=10)에서 영상을 획득한 다음 여과후역투사방법(램프필터 사용)과 3D RAMLA를 이용하여 영상재구성을 하고 FWHM을 구하였다. 민감도 측정을 위하여 선선원(F-18)을 축횡단면의 중심과 중심에서 10 cm 벗어난 지점에서 5개의 알루미늄관을 차례로 씌워 매질감쇠에 따라 달라지는 참계수를 구하고 이 값을 회귀분석하여 감쇠매질이 없는 이상적인 상황에서의 민감도를 측정하였다(랜덤계수가 참계수의 1%이내). 산란분획과 NECR을 측정하기 위하여 F-18 선선원(1110 MBq)을 산란팬텀에 주입하여 7반감기동안 계수를 획득하였다. SSRB을 사용하여 3D 데이터를 재구성한 다음 랜덤계수율이 참계수율이 1% 미만인 영역에서 산란분획을 구하고 각 횡단면의 값을 평균하여 전체 산란분획을 얻었다. 이 값을 기초로 각 프레임, 각 횡단면에 대한 랜덤계수율, 산란계수율, NECR을 구하였다. 결과: 스캐너의 중심에서 1 cm 벗어난 지점에서 횡축방향, 축방향 공간분해능은 (1) 5.3, 6.5 mm (FBP), (2) 5.1, 5.9 mm (3D RAMLA)이었다. 횡단면의 중심에서 10 cm 벗어난 지점에서 횡축반경방향, 횡축접선방향, 축방향 공간분해능은 (1) 5.7, 5.7, 7.0 mm (FBP), (2) 5.4, 5.4, 6.4 mm (3D RAMLA)이었다. 감쇠매질이 없는 이상적인 상황에서의 민감도는 횡단면의 중심에서 3,620 counts/sec/MBq, 횡단면의 중심에서 10 cm 벗어난 지점에서 4,324 counts/sec/MBq이었다. 산란분획은 40.6%, 최대 참계수율과 최대 NECR은 각각 88.9 kcps @ 12.9 kBq/mL, 34.3 kcps @ 8.84 kBq/mL이었다. 결론: 이 실험에서 NEMA NU2-2001을 이용해 GSO 섬광결정을 사용해 제작된 PET/CT에 대한 성능 평가를 실시하였다. 이는 BGO, LSO 섬광결정을 사용해 제작된 PET 스캐너의 특성과 비교할 수 있는 자료를 제공하며 PET 영상 획득 시 객관적 평가와 분석에 유용하였다.

고속 다중 노출 영상을 이용한 골프공의 비행 요소 측정 (The Measurement of Flight Data of Golfball with High-Speed Multi-Exposure Image)

  • 김기현;박현우;주우석;이동훈;윤태수
    • 한국멀티미디어학회논문지
    • /
    • 제12권5호
    • /
    • pp.699-707
    • /
    • 2009
  • 최근 체감형 스포츠 게임이 늘어나면서 실제 사용자의 동작을 인식하는 연구가 활발히 진행 중이다. 그 중에서도 골프에 관한 연구가 활발하다. 본 논문에서는 고속 다중 노출 영상의 획득이 가능한 카메라를 이용하여 골프공의 비행데이터를 측정한다. 고속 다중 노출 이미지의 획득이 가능한 카메라는 촬영 시, 한 장의 이미지에 여러 번의 노출을 이용하여 영상을 획득 할 수 있으며, 획득한 영상은 영상처리과정을 통하여 촬영된 공의 위치를 측정한다. 계산된 골프공의 위치는 물리공식을 이용하여 골프공의 비행데이터인속도, 날아가는 방향을 계산한다. 본 시스템은 향후 비행하는 골프공뿐만 아니라, 야구, 테니스 등과 같은 구형 물체의 물리적 요소 측정이 가능하다.

  • PDF

Application of Lower Body Girth Change Analysis Using 3D Body Scanning to Pants Patterns

  • Choi, Sun-Yoon;Ashdown, Susan P.
    • 한국의류학회지
    • /
    • 제34권6호
    • /
    • pp.955-968
    • /
    • 2010
  • Three-dimensional body data has been used in many industry fields including the apparel industry. This research used data from a study of the changes in lower body girth measurements from a 3D scan study of 25 female subjects aged 18 to 24 in four postures; a standing posture, a $120^{\circ}$ knee bend posture, a one pace stepping posture, and a sitting posture with a $90^{\circ}$ knee bend. We used the information on the difference between standing and seated measurements to adjust ease values for pants patterns an evaluation of the appearance, and the comfort of the pants. Waist girth in the sitting posture increased 8% compared to a standing posture and the hip girth measurement increased 7%. A basic pants pattern (pants A) with 2.4cm ease at the waist and 2.6cm ease at the hip was developed and a pants pattern (pants B) was developed using the rates of lower body girth change with a 5.7cm ease (8% change) at the waist and 7cm ease (7% change) at the hip. The appearance assessment items of pants A in a standing posture were higher than pants B. On the other hand, most appearance assessment items of pants B in a sitting posture were higher than pants A, especially the ease of pants back waistline and the appearance of the whole back. Comfort assessment items of pants B in both standing and sitting postures were higher than the comfort assessment items for pants A, especially the location of pants waistline, the ease of pants at the waistline, and the ease at the abdomen. In order to find the best level of ease for better appearance and comfort in both standing and sitting postures, 20 pants were constructed with ease values at the waist and hip in increments of 1.1cm in the range between the ease values of pants A and pants B. A fit test was conducted to compare the average appearance and comfort ratings that identified the pants with the best ease values at the waist and hip. The highest total mean was achieved in the pants with a waist ease of 4.6cm and hip ease of 4.8cm.

Anthropometric Analysis of Facial Foramina in Korean Population: A Three-Dimensional Computed Tomographic Study

  • Lim, Jung-Soo;Min, Kyung-Hee;Lee, Jong-Hun;Lee, Hye-Kyung;Hong, Sung-Hee
    • 대한두개안면성형외과학회지
    • /
    • 제17권1호
    • /
    • pp.9-13
    • /
    • 2016
  • Background: Position of the facial foramina is important for regional block and for various maxillofacial surgical procedures. In this study, we report on anthropometry and morphology of these foramina using three-dimensional computed tomography (3D-CT) data. Methods: A retrospective review was performed for all patients who have undergone 3D-CT scan of the facial skeleton for reasons other than fracture or deformity of the facial skeleton. Anthropometry of the supraorbital, infraorbital, and mental foramina (SOF, IOF, MF) were described in relation to facial midline, inferior orbital margin, and inferior mandibular margin (FM, IOM, IMM). This data was analyzed according to sex and age. Additionally, infraorbital and mental foramen were classified into 5 positions based on the anatomic relationships to the nearest perpendicular dentition. Results: The review identified 137 patients meeting study criteria. Supraorbital foramina was more often in the shape of a foramen (62%) than that of a notch (38%). The supraorbital, infraorbital, and mental foramina were located 33.7 mm, 37.1 mm, and 33.7 mm away from the midline. The mean vertical distance between IOF and IOM was 13.4 mm. The mean distance between MF and IMM was 21.0 mm. The IOF and MF most commonly coincided with upper and lower second premolar dentition, respectively. Between the sex, the distance between MF and IMM was significantly higher for males than for female. In a correlation analysis, SOF-FM, IOF-FM and MF-FM values were significantly increased with age, but IOF-IOM values were significantly decreased with age. Conclusion: In the current study, we have reported anthropometric data concerning facial foramina in the Korean population, using a large-scale data analysis of three-dimensional computed tomography of facial skeletons. The correlations made respect to patient sex and age will provide help to operating surgeons when considering nerve blocks and periosteal dissections around the facial foramina.

콘포컬 레이저 현미경을 이용한 불연속면의 거칠기 측정 연구 (A Study of Roughness Measurement of Rock Discontinuities Using a Confocal Laser Scanning Microscope)

  • Byung Gon Chae;Jae Yong Song;Gyo Cheol Jeong
    • 지질공학
    • /
    • 제12권4호
    • /
    • pp.405-419
    • /
    • 2002
  • 새롭게 개발된 레이저 콘포컬 현미경을 이용해 암석 불연속면의 거칠기를 측정하였다. 레이저의 파장은 488 nm이며, 현미경은 두 개의 galvano-meter scanner mirror를 이용한 광 편광법에 의해 제어된다. 레이저 반사를 통한 자동 초점기능은 관찰대상을 빠르고 정확하게 측정할 수 있다. 이 현미경은 기존의 다른 콘포컬 현미경에 비해 광축방향의 해상도를 크게 개선하였고, 특수 제작한 현미경 스테이지를 이용해 최대 $10{\;}{\times}{\;}10{\;}cm$ 까지 크기의 시료를 측정할 수 있다. 측정간격은 x와 y 방향으로 $2.5{\;}\mu\textrm{m}$씩이며, z방향의 최대 측정해상도는 $10{\;}\mu\textrm{m}$로서, 다른 방범에 비해 훨씬 정확하다. 조립질과 세립질의 입도가 다른 화강암을 대상으로 인장시험(Brazilian test)를 통해 인공절리를 생성시켰고, 생성된 좌우의 절리면에 각각 3개씩의 측선을 설정하였다. 각 측선을 따라 측정한 높이는 1차원은 물론 거칠기의 세밀한 양상을 보여주는 2차원과 3차원의 디지털 이미지로 표현된다. 조립질 화강암의 1차원 단면은 세립질보다 불연속면의 기복이 더 심함을 잘 보여준다. 거칠기를 정량적으로 특성화하고 거칠기를 구성하는 성분 중 가장 큰 영향을 미치는 성분을 파악하기 위해 고속퓨리에 변환 (FFT)를 이용한 스펙트럼 분석을 실시하였다. 스펙트럼 분석결과 저주파 성분이 큰 시효의 경우 거칠기의 기복변화가 심하고 긴 파장을 나타내는 경향이 있음을 구명하였다.

CT Angiography 영상에서 조영제 희석비율에 따른 Blooming Artifact 발생의 상관성 연구 (The Correlation Study of the Occurrence of Blooming Artifact according to Dilution Ratio of Contrast Media in CT Angiography)

  • 이수성;백세준;석정연;류대연;김성진;허영철
    • 한국방사선학회논문지
    • /
    • 제14권1호
    • /
    • pp.61-68
    • /
    • 2020
  • 본 연구에서는 CT 혈관조영 영상에서 조영제 희석비율에 따른 Blooming 인공물 발생의 상관성에 대하여 알아보고자 한다. 3D 프린터를 이용하여 PLA(Poly Lactic Acid)재질의 구형 팬텀을 자체 제작하였고 구형 팬텀 내부에 조영제와 식염수의 비율을 100:0부터 10:90으로 희석하여 총 10세트를 준비하였다. 이후 CT 횡단면 영상을 얻고 raw 데이터를 최대강도투사법, 다중평면 재구성 기법으로 재구성하여 각각 횡단면, 시상면, 관상면의 영상을 얻었다. 검사 후 얻은 영상의 구형 팬텀의 직경을 각각 30회씩 총 1800회 측정하였다. 측정결과, 다중 평면 재구성 기법 중 관상면에서 20:80으로 희석하였을 때 20.47±0.05 mm로 가장 작게 측정되었다(p<0.05). 마찬가지로 최대강도투사법 중 시상면에서 20:80으로 희석하였을 때 20.39±0.08 mm로 가장 작게 측정되었다(p<0.05). 희석비율과 측정 크기의 상관성 분석에서는 모든 재구성 영상에서 강한 음의 상관성을 확인하였다(p<0.05). 결론적으로 조영제 희석비율이 높을수록 혈관의 실측을 측정하기 어려우며 이에 대한 원인으로 Blooming 인공물이 있음을 확인하였다. 따라서 실측에 관한 추후 연구에서 본 연구가 기초자료를 제공할 수 있을 것이라 사료된다.

선박 자동계류를 위한 LiDAR기반 시각센서 시스템 개발 (A LiDAR-based Visual Sensor System for Automatic Mooring of a Ship)

  • 김진만;남택근;김헌희
    • 해양환경안전학회지
    • /
    • 제28권6호
    • /
    • pp.1036-1043
    • /
    • 2022
  • 본 논문은 자동계류 장치에 설치하여 선박의 접안 상황을 검출할 수 있는 시각 센서의 개발에 대하여 논하고 있다. 선박의 접안 시 사고방지를 위해 선박의 속도를 통제하고 위치를 확인하고 있음에도 불구하고 부두에서의 선박 충돌사고는 매년 발생하고 있으며, 이로 인한 경제적, 환경적 피해가 매우 크다. 따라서 부두에 접안하는 선박에 대한 안전성 확보를 위해 선박의 위치 및 속도 정보를 신속하게 확보할 수 있는 시각 시스템의 개발은 중요하다. 이에 본 연구에서는 선박의 접안 시 사람과 유사하게 영상을 통해 접안하는 선박을 관찰하고, 주변 환경에 따른 선박의 접안 상태를 적절하게 확인할 수 있는 시각센서를 개발하였다. 먼저, 개발하고자 하는 시각 센서의 적정성을 확보하기 위해 기존 센서로부터 제공되는 정보, 감지 범위, 실시간성, 정확도 및 정밀도 측면에서 센서 특성을 분석하였다. 이러한 분석 자료를 바탕으로 LiDAR형태의 3D시각 시스템의 개념 설계, 구동메커니즘 설계 및 모션 구동부의 힘과 위치 제어기 설계 등을 수행하여 대상물의 정보를 실시간으로 획득할 수 있는 3D 시각 모듈을 개발하였다. 최종적으로 시스템 구동을 위한 제어 시스템의 성능평가와 스캔 속도에 대한 성능을 분석하였고, 실험을 통해 개발된 시스템의 유용성을 확인할 수 있었다.

일측성 방광 요관 역류 환아에서 신반흔의 발생 (The Occurrence of Renal Scarring in Children with Unilateral Vesicoureteral Reflux)

  • 이태호;손미란;변순옥;문정웅
    • Clinical and Experimental Pediatrics
    • /
    • 제48권9호
    • /
    • pp.998-1003
    • /
    • 2005
  • 목 적 : 소아에서 급성 신우신염 후에 신반흔이 형성될 수 있고, 형성된 신반흔은 고혈압, 신부전을 야기 시킬 수 있다. 이러한 신반흔을 일으킬 수 있는 요인으로 대표적인 것이 방광 요관 역류의 존재였다. 그러나 계속적으로 신반흔과 방광 요관 역류가 상관이 없다는 연구 결과가 있어 이에 대한 다른 관찰이 필요하였다. 본 연구는 요로 감염 후 일측성 방광 요관 역류를 보이는 환아를 모아서 신반흔의 발생에 대하여 살펴보았다. 방 법 : 1996년 1월에서 2004년 12월까지 부산 왈레스기념 침례병원 소아과에 요로 감염으로 입원한 환아 중 VCUG를 시행하여 일측성 방광 요관 역류를 보인 35명의 환아를 대상으로 하였다. 입원초기에 ESR, CRP, 신장초음파 검사를 시행하였고 요로 배양검사 음성 후 VCUG 검사를 하였다. 4-6개월 후 DMSA 스캔을 시행하였고 신반흔 발생 유무와 나이, 성별, 발열 기간, ESR, CRP, 방광 요관 역류의 유무, 방광 요관 역류 정도에 대하여 조사하였다. 결 과 : 1) 방광 요관 역류를 보이는 35신단위에서 신반흔 발생률은 29%로 방광 요관 역류가 없는 35신단위의 3%에 비해 유의하게 높았다(P<0.05). 2) 방광 요관 역류가 있으면서 신반흔을 보인 10신단위의 역류 등급은 3등급 이상으로 역류 정도가 심할수록 신반흔 발생이 유의하게 높았다(P<0.05). 3) 나이에 따른 신반흔 발생은 1세 이하와 1세 이상으로 나누었을 때 유의한 차이를 보이지 않았다(P>0.05). 4) 치료 전 발열 기간이 길수록 신반흔 형성이 유의하게 높았다(P<0.05). 5) 진단시의 CRP, ESR 염증수치는 신반흔 형성 신단위에서 $12.8{\pm}7.3mg/dL$, $56.3{\pm}23.8mm/hr$이고 신반흔 무형성군에서 $3.9{\pm}3.8mg/dL$, $27.9{\pm}18.1mm/hr$으로 신반흔 형성군에서 유의하게 높았다(P<0.05). 결 론 : 신반흔의 형성에는 방광 요관 역류와 강한 연관성이 있었고 이외에 방광 요관 역류 정도, 발열 기간, CRP, ESR 등과 유의한 관련성을 가졌고 나이와는 무관하였다. 요로 감염 뒤의 신반흔 형성에 방광 요관 역류가 큰 영향을 미치므로 요로 감염을 앓은 환아에서 VCUG 검사를 통하여 방광 요관 역류의 유무를 알아내어 적절하게 치료함으로써 신반흔을 예방하여 고혈압, 신부전과 같은 합병증의 발생을 막는 것이 중요할 것으로 생각된다.

활동여유량을 적용한 커버롤 작업복 패턴 제작 방법 연구 (A Study of Pattern Making for Coverall Work Clothing Using Dynamic Wearing Ease)

  • 오설영;천종숙;신새미;이민지
    • 대한가정학회지
    • /
    • 제49권3호
    • /
    • pp.113-121
    • /
    • 2011
  • This study developed a method of calculating dynamic wearing ease (DWE) to make patterns for coverall work clothing. The DWE was measured from 3D body scan data of women in their 20's (n = 10). The body postures adopted for measuring the DWE were sitting and deep bending postures. Three types of experimental patterns (A, B, C) were developed. The DWE was applied at the waist and hip lines of the pattern. The location and size of the DWE varied from one pattern to another. For pattern B, DWE of 8.8cm was applied at the back of the waistline. For pattern C, 5.3cm was applied at the waist for the center back line, and 3.5cm was applied at the under hip level. The comfort of the experimental clothing was evaluated in six body postures. The results showed that patterns B and C were comfortable at the crotch, shoulders, and arm pits. Pattern C was comfortable at the hip and crotch areas in the arms lifting-up posture and the stepping-up posture. The appearance and fit of the experimental clothing were evaluated by the panels. Patterns B and C fitted better than pattern A at the abdomen. The results suggest that DWE should be applied at the waist and hip levels for making coverall work clothing patterns.