• Design & Manufacturing
• /
• 제16권3호
• /
• pp.58-65
• /
• 2022

Micro-fluidic chip has been fabricated by lithography process on silicon or glass wafer, casting using PDMS, injection molding of thermoplastics or 3D printing, etc. Among these processes, 3D printing can fabricate micro-fluidic chip directly from the design without master or template for fluidic channel fabricated previously. Due to this direct printing, 3D printing provides very fast and economical method for prototyping micro-fluidic chip comparing to conventional fabrication process such as lithography, PDMS casting or injection molding. Although 3D printing is now used more extensively due to this fast and cheap process done automatically by single printing machine, there are some issues on accuracy or surface characteristics, etc. The accuracy of the shape and size of the micro-channel is limited by the resolution of the printing and printing direction or layering direction in case of SLM type of 3D printing using UV curable resin. In this study, the printing direction and thickness of each printing layer are investigated to see the effect on the size, shape and surface of the micro-channel. A set of micro-channels with different size was designed and arrayed orthogonal. Micro-fluidic chips are 3D printed in different directions to the micro-channel, orthogonal, parallel, or skewed. The shape of the cross-section of the micro-channel and the surface of the micro-channel are photographed using optical microscopy. From a series of experiments, an optimal printing direction and process conditions are investigated for 3D printing of micro-fluidic chip.

• 대한치과기공학회지
• /
• 제43권1호
• /
• pp.13-18
• /
• 2021

Purpose: This study aimed to compare the flexural properties and perform the Weibull analysis of photo-curing three-dimensional (3D) printing resin. Methods: Photo-curing temporary resin (3D polymer) was used as a printing resin. Specimens (65 × 10 × 3.3 ㎣) were prepared following the ISO 20975-1 guidelines and according to the different printing orientations using a digital light processing 3D printer (D2 120; Dentium). The flexural strength (FS), flexural modulus, and work of fracture (WOF) were measured using a universal testing machine (Instron 3344; Instron) at a crosshead speed of 5 mm/min. Results: In this study, the 0° orientation exhibited higher FS and WOF than the 45° orientation. Significant differences were found among the printing orientations (p<0.05). Specimens printed at the 0° orientation were the most accurate. In the Weibull analysis, 0° showed the greatest Weibull modulus (m), which represents a higher reliability. Conclusion: 3D printing should be selected and used by considering flexural properties, size accuracy, and reliability.

• 한국산업보건학회지
• /
• 제28권3호
• /
• pp.241-256
• /
• 2018

Objectives: This study aimed to review the characteristics of three-dimensional printing technology focusing on printing types, materials, and health hazards. We discussed the methodologies for exposure assessment on hazardous substances emitted from 3D printing through article reviews. Methods: Previous researches on 3D printing technology and exposure assessment were collected through a literature review of public reports and research articles reported up to July 2018. We mainly focused on introducing the technologies, printing materials, hazardous emissions during 3D printing, and the methodologies for evaluation. Results: 3D printing technologies can be categorized by laminating type. Fused deposition modeling(FDM) is the most widely used, and most studies have conducted exposure assessment using this type. The printing materials involved were diverse, including plastic polymer, metal, resin, and more. In the FDM types, the most commonly used material was polymers, such as acrylonitrile-butadiene-styrene(ABS) and polylactic acids(PLA). These materials are operated under high-temperature conditions, so high levels of ultrafine particles(mainly nanoparticle size) and chemical compounds such as organic compounds, aldehydes, and toxic gases were identified as being emitted during 3D printing. Conclusions: Personal desktop 3D printers are widely used and expected to be constantly distributed in the future. In particular, hazardous emissions, including nano sized particles and various thermal byproducts, can be released under operation at high temperatures, so it is important to identify the health effects by emissions from 3D printing. Furthermore, appropriate control strategies should be also considered for 3D printing technology.

• 복식
• /
• 제66권7호
• /
• pp.124-138
• /
• 2016

The present study observes collaboration methods in which 3D printing was a part of the fashion manufacturing process, expression methods of such cases, and their ripple effects. As a result, the three types of collaborations between fashion designers and other industry fields, fashion brands and 3D printing companies, and fashion designers and artists. Case analysis results and ripple effects found according to each collaboration method were as follows. First, in collaborations found were between fashion designers and other industry fields, 3D printed fashion works with futuristic images were seen through the fusion of future industries, which claim to support cutting edge digital technology, and creative fashion design. As they were mainly collaborations between automobile industries with cutting edge images or digital related industries and fashion designers, they were expressed as a new form of experimental clothing, and were used as strategies to improve future corporate images of the high tech industry. Second, in collaborations between fashion brands and 3D printing technology businesses, the sporting good brands and the shoe industry attempted to let their products be known through the promotion of functional material or ergonomic technology. While they emphasize practicality by mainly using flexible material, they were mainly proposed as functional sporting goods for famous players or as shoe accessories, so methods are still used for public distribution as brand promoting marketing strategies. Third, with collaborations between fashion designers and artists, creative pieces were shown through the grafting of 3D printing technology, the artistry of artists, and the experimentation of fashion designers. In particular, the innovative value of fashion as art was created through the union of the artistic 3D modeling technology support of artists and the creativity of designers. Like this, 3D printing fashion can graft the cutting edge nature of fashion to other industry fields through collaborations, enhancing pacesetting images, and in the fashion field, it can improve possibilities for innovations in the fashion industry through the support of 3D printing technology businesses and artists, raising expectations towards future human living.

• 패션비즈니스
• /
• 제24권6호
• /
• pp.80-88
• /
• 2020

This study, by analyzing previous studies, aimed to understand how 3D printing technology is applied and utilized in the fashion industry and to contribute to encouraging further studies on 3D printing technology in the fashion sector and suggesting proper ways for designing such studies. Firstly, 47 papers were selected from all literature concerning 3D printing technology published in 15 journals of fashion and design since 2013. Afterwards, these papers were analyzed with regard to the frequency, topics or sectors, and purposes or types of studies shown by outcomes. Results were as follows: First, the number of papers on 3D printing technology published in the journals was counted according to the year, which showed that this number increased rapidly after 2015 for about 3 years. Especially in the year 2016, this increase was quite notable. Although a little decrease in this number was found afterwards, a steady increase was highly expected. Out of the 8 journals, Journal of The Korean Society of Fashion Design had the maximum papers. Regarding areas of studies, works on designing and development of products were most common. Finally, regarding the purpose of studies, those suggesting or presenting apparel were predominant. Product items included clothes, shoes, and caps. Studies on caps mostly covered designing the products. Studies on clothes aimed at designing, characteristics of construction, and case study. However, there were very few works on 3D printing technology as an alternative material or composition of clothing.

• KSBB Journal
• /
• 제30권6호
• /
• pp.268-274
• /
• 2015

3D printing technology has been used in various fields such as materials science, manufacturing, education, and medical field. A number of research are underway to improve the 3D printing technology. Recently, the use of 3D printing technology for fabricating an artificial tissue, organ and bone through the laminating of cell and biocompatible material has been introduced and this could make the conformity with the desired shape or pattern for producing human entire organs for transplantation. This special printing technique is known as "3D Bio-Printing", which has potential in biomedical application including patient-customized organ out-put. In this paper, we describe the current 3D bio-printing technology, and bio-materials used in it and present it's practical applications.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권4호
• /
• pp.55-60
• /
• 2020

This study aims to apply Arduino and 3D printing technology considered as a key subject in the age of 4th industrial revolution which is a step 1 for customizing and applying the process of production by chemical molding companies producing environment-friendly biodegradable packaging materials to the 3D printing teaching in universities. Step 3 is applied to IoT for Arduino application, and 3D printing technology is also used on the basis of teaching creative integrated human resource. Integration of Arduino with 3D printers is based on the assumption that middle- and high-school students can learn it step by step to higher levels and university students majoring or not majoring in computing science can also have computing skills for solving 3D printing-based problems. For IoT application in this study, the 3D printing technology is applied to the external shape of products for producing an Arduino-based lighting fixture. The applied 3D printing technology is further extended to teaching modeling of producing packaging materials by chemical product molding companies in the age of 4th industrial revolution.

• 패션비즈니스
• /
• 제24권6호
• /
• pp.1-17
• /
• 2020

This study investigated the perceptions, attitudes, and behaviors of potential consumers toward using 3D printers to create their personal clothes. An online survey and a series of Welch's t-tests and ANOVA were conducted to investigate the differences in demographic characteristics, prior experiences in 3D printing, and levels of need for uniqueness among the sub-groups. A multiple linear regression analysis was performed to test the relationships among variables of the modified Unified Theory of Acceptance and Use of Technology (UTAUT). There were significant differences in gender and prior experiences regarding the UTAUT of personal 3D printing. The need for uniqueness has a positive effect on consumers' intention to use 3D printing technology for designing personal clothes and perception of the price of the 3D printer used to create individual clothes is important. Positive relationships were found between UTAUT variables as well as the use and purchase intentions. This study analyzed the potential for popularization of 3D printing technology to create fashion items and explore consumer willingness to embrace and use personal fashion designs. The results of this study are expected to assist consumers, designers, retailers and marketers, and experts in 3D printing technology by providing insight into consumer awareness and acceptance of personalized 3D-printed fashion and products.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.21-26
• /
• 2013

본 논문에서는 최근 미래 신산업 혁명을 주도할 유망기술로 각광 받고 있는 3D 프린팅 기술과 이를 이용한 조직공학 및 재생의학 분야의 응용 기술을 살펴보았다. 한국기계연구원에서는 3D 프린팅 기술을 바탕으로 독자적인 3D 바이오프린팅 장비를 설계 및 제작하였으며, 개발된 3D 바이오프린팅 장비를 이용하여 다양한 분야에 적용이 가능한 3D 형상의 조직공학용 스캐폴드를 제작하였다. 또한 세포와 생체재료를 3D로 직접 프린팅 할 수 있는 세포 프린팅 기술을 개발하였으며, 이는 인공장기 개발분야의 원천 기술로 조직공학 및 재생의학 분야에 3D 프린팅 기술이 활용될 수 있는 기반을 확립하였다.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.100-107
• /
• 2017

3D printing is a technology that converts a computer-generated 3D model into a real object with additive manufacturing technology. A majority of 3D printing technologies uses one material, and this is considered a limitation. In this study, we developed a multi-material 3D printer by adopting dual resin vat and cleaning system with DLP (Digital Light Processing) 3D printing technology. The developed multi-material DLP 3D printer is composed of a manufacturing system, cleaning system, transporting system, and automatic resin recharging system. Various 3D structures were 3D printed with two materials, thus demonstrating the potential. Printing performance of the multi-material DLP 3D printer was studied by performing a comparative surface roughness test and tension test on specimens composed of one material as well as those composed of two materials.