• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.516-517
• /
• 2019

3D 프린팅 기술은 가상 혹은 평면에 설계된 디자인을 입체적으로 출력이 가능하다는 점에서 핵심적 기술로 주목받아 오고 있다. 본 연구는 슈즈에 관한 개념을 1차적으로 정리하여 일반적 제조과정을 분석하고, 3D 프린팅이 적용된 슈즈제작과정을 제시하고, 생산되는 슈즈 사례들을 브랜드별(스포츠 브랜드, 디자이너 브랜드)로 구분하여 맞춤형 제작 특성을 연구하였다. 사례 분석을 통해 3D 프린팅 슈즈의 4가지 디자인 제작 특성을 도출했다. 따라서 본 연구는 향후 3D 프린팅을 활용한 슈즈디자인 영역에서 보다 심화된 창조적 발상의 근거를 제시할 것으로 사료된다.

• 대한소아치과학회지
• /
• 제43권1호
• /
• pp.93-108
• /
• 2016

3D 프린팅 기술이 가장 많이 활용될 수 있는 분야의 하나가 의학분야이다. 3D 프린팅 기술은 최근들어 더욱 상업화되고 프린팅에 사용되는 재료 또한 생체친화성, 생분해성 고분자를 이용 가능하게 됨에 따라 생체의료분야에서의 활용성이 점차적으로 높아지고 있는 경향이다. 생체의료분야에서는 수술 모형을 제작하고 절제범위와 시술 후의 형태를 시술 전에 미리 확인하여 시술시간을 단축하고 부작용을 최소화하고 있으며 인공 골과 장기를 생산함으로써 이식에 따른 부작용을 감소시키고 있다. 또한 보청기, 의족 등 맞춤형 의료 보조용품을 생산하고 있다. 치의학 분야에도 크라운, 덴쳐 등의 보철 수복물 제작, 교정 장치 및 모델 제작, 임플란트 식립이나 외과 수술을 위한 수술용 가이드 제작 등 치과 의료기술을 한 차원 더 높일 수 있을 것으로 전망된다. 그러나 아직은 프린팅 재료(소재), 조형기술, CAD 관련 소프트웨어 기술, 생체안정성과 유효성 검증, 호환성과 표준화 등 해결해야 할 과제가 산적해 있있어 앞으로 이에 대한 지속적인 연구, 개발이 이루어져야 할 것으로 사료된다.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.508-514
• /
• 2019

In the development of advanced ceramic tools, material improvements and design freedom are critical in improving tool performance. However, in the die press molding method, many factors limit tool design and make it difficult to develop innovative advanced tools. Ceramic 3D printing facilitates the production of prototype samples for advanced tool development and the creation of complex tooling products. Furthermore, it is possible to respond to mass production requirements by reflecting the needs of the tool industry, which can be characterized by small quantities of various products. However, many problems remain in ensuring the reliability of ceramic tools for industrial use. In this study, alumina inserts, a representative ceramic tool, was manufactured using the digital light process (DLP), a 3D printing method. Alumina inserts prepared by 3D printing are pressurelessly sintered under the same conditions as coupon-type specimens prepared by press molding. After sintering, a hot isostatic pressing (HIP) treatment is performed to investigate the effects of relative density and microstructure changes on hardness and fracture toughness. Alumina inserts prepared by 3D printing show lower relative densities than coupon specimens prepared by powder molding but indicate similar hardness and higher fracture toughness values.

• Design & Manufacturing
• /
• 제12권3호
• /
• pp.19-24
• /
• 2018

Fused deposition Modeling (FDM) is one of the most widely used for the prototype of parts at ease. The FDM 3D printing method is a lamination manufacturing method that the resin is melted at a high temperature and piled up one by one. Another term is also referred to as FFF (Fused Filament Fabrication). 3D printing technology is mainly used only in the area of prototype production, not in production of commercial products. Therefore, if FDM 3D printer is applied to the product process of commercial products when considered, the strength and dimensional accuracy of the manufactured product is expected to be important. In this study, the mechanical properties of parts made by 3D printing with FDM method were investigated. The aim of this work is to examine how the mechanical properties of the FDM parts, by changing of processing FDM printing direction and the height of stacking layer is affected. The effect of the lamination direction and the height of the stacking layer, which are set as variables in the lamination process, by using the tensile specimen and impact specimen after the FDM manufacturing process were investigated and analyzed. The PLA (Poly Lactic Acid) was used as the filament materials for the 3D printing.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.215-223
• /
• 2016

The low price around 1000 USD makes consumer 3D printers as a new additive manufacturing platform for the personal manufacturing where consumers can make and sell their own products. To allow the consumers to design and manufacture their products, not only economic 3D printers but also supporting information systems for their design and manufacturing are essential. This study suggests an extended product data management (PDM) system that can support both the design and manufacturing of personal products with consumer 3D printing services. This extended PDM system helps consumer designers use advanced PDM technologies for their design and connected 3D printing services with Internet of Things (IoT) technology for realization of their products. As a result, the proposed system supports the consumer designers a seamless integrated product development and manufacturing environment supported by PDM and consumer 3D printing services.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.301-307
• /
• 2016

Additive manufacturing (AM), so called 3D Printing is a new manufacturing process and is getting attraction from many industries. There are several methods of 3D printing. Among them fused deposition modeling (FDM) type is most widely used by reason of cheap maintenance, easy operation and variety of polymeric materials. Articles manufactured by 3D printing have weak deposition strength compared with conventionally manufactured products. Deposition strength of FDM type 3D printed article is highly dependent of deposition temperature. Subsequently the nozzle temperature in the FDM type 3D printing is very important and it is controlled by heat source in the 3D printer. Nozzle is connected with heat block and barrel, and heat block contains heat source. Nozzle becomes hot through heat conduction from heat source. Nozzle temperature has been predicted for various thermal boundary conditions by computer simulation and compared with experimental measurement. Nozzle temperature highly depends upon thermal conductivities of heat block and nozzle. Simulation results are good agreement with experiment.

• 한국건설관리학회논문집
• /
• 제23권1호
• /
• pp.106-112
• /
• 2022

적층제조(AM, 3D프린팅) 기술은 건설업계에서 다양한 효과로 주목받고 있다. 특히 시공자동화, 자원관리, 시공기간 정밀도 향상, 작업자 안전 등의 문제점을 해소하는 능력을 기대하고 있다. 하지만, 적층 시공 과정은 축적된 데이터가 많은 기존 시공기술과 달리 성숙하지 못한 절차 및 시공방법으로 인해 시행착오와 예측이 어려운 사고를 유발한다. 본 연구에서는 현장 시공형 건설 AM 프로세스를 설계하고 실증을 위한 실험이 진행된다. 또한, 정성적인 실험결과의 원인 분석이 진행되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.6-7
• /
• 2021

3D printing has the unique advantage of the ability to customize freeform products even in small quantities. It was recently applied successfully in the node connection system for the irregular shaped glass design of Gwanggyo Galleria Department Store. This was achieved by applying 3D printing technology for an innovative smart node design. The novel system offers flexibility to address various design challenges in addition to maximizing construction quality and reducing construction period. In this paper, we aim to examine the use of 3D printing based innovative technologies in the construction industry. With this aim in mind, we present the case of the Gwanggyo Galleria Department Store's smart nodes. The key objective of this study is creating awareness in the construction industry of the need to utilize fourth industrial revolution technology in architecture.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.83-89
• /
• 2019

In the conventional casting and forging method, there is a disadvantage that a mold is an essential addition, and a production cost is increased when a small quantity is produced. In order to overcome this disadvantage, a metal 3D printing production method capable of directly forming a shape without a mold frame is mainly used. In particular, overseas research has been conducted on various materials, one of which is a metal printer. Similarly, domestic companies are also concentrating on the metal printer market. However, In this case of the conventional metal 3D printing method, it is difficult to meet the needs of the industry because of the high cost of materials, equipment and maintenance for product strength and production. To compensate for these weaknesses, printers have been developed that can be manufactured using sand mold, but they are not accessible to the printer company and are expensive to machine. Therefore, it is necessary to supply three-dimensional casting printers capable of metal molding by producing molds instead of conventional metal 3D printing methods. In this study, we intend to reduce the unit price by replacing the printing method used in the sand casting printer with the FDM method. In addition, Ag paste is used to design the output conditions and enable ceramic printing.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권6호
• /
• pp.441-446
• /
• 2019

The purpose of this paper is to recognize the usefulness of the Phantom produced with 3D printing technology by reproducing the original phantom with 3D printing technology. Using CT, we obtained information from the original phantom. The acquired file was printed by the SLA method of ABS materials. For inspection, SPECT/CT was used to obtain images. We filled the both Phantom with a solution mixed with ^99mTcO4 1 mCi in 1 liter of water and acq uired images in accordance with the standard protocol. Using Image J, the SNR for each slice of the image was obtained. As a reference images, AC images were used. For the analysis of acquired images, ROI was set in the White mater and Gray mater sections of each image, and the average Intensity Value within the ROI were compared. According to the results of this study, 3D printed phantom's SNR is about 0.1 higher than the conventional phantom. And the ratio of Intensity Value was shown in the original 1 : 3.4, and the printed phantom was shown to be 1 : 3.2. Therefore, if Calibration Value is applied, It is assumed that it can be used as an alternative to the original.