• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.365-370
• /
• 2020

Recently, additive manufacturing (AM) technology has been applied to various industries such as automotive, aviation, medical, and electronics. Most prior studies are limited to the mechanical properties of printed materials, and few studies are being conducted on their tribological characteristics. However, the friction and wear characteristics of the material should be studied in order to utilize the components manufactured using AM technology as mechanical parts. In this study, the friction and wear characteristics of acrylonitrile-butadiene-styrene (ABS)-like resin printed with stereo lithography apparatus (SLA) 3D printing are evaluated according to the viscosity of silicon oil lubricant using a ball-on-disk experiment. Lubricants with a viscosity of 500, 1000, and 2000 cSt are prepared for the experiment. If silicon oil lubricants are used during the ball-on-disk test, the coefficient of friction (COF) and wear rates are significantly reduced, and the higher the viscosity of the lubricant, the lower will be the COF and wear rates. It is also verified that the temperature of the specimen owing to friction also decreases according to the viscosity of the lubricant. This is because of the silicon oil film thickness, and the higher the viscosity of the lubricant, the thicker will be the oil film. More studies on the tribological characteristics of 3D printing materials and suitable lubricants will be required to use 3D printed parts as mechanical elements.

• 한국정밀공학회지
• /
• 제32권9호
• /
• pp.781-786
• /
• 2015

Recently, studies of 3D printing methods have been working in various applications. For example, the powder base method laminates the prints by using a binding or laser sintering method. However, the draw back of this method is that the post process is time consuming and does not allow for parts to be rapidly manufactured. The binding method requires the post process while the time required for the post process is longer than the manufacturing time. This paper proposes a UV curing binding method with an integrated piezo printing head system. The optimization of an arbitrary waveform generation for the control of a UV curable resin droplet was researched, in addition to developed optimized UV curing processes in multi nozzle ink jet heads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2058-2060
• /
• 2004

In this paper, circular polarized antennas of Tx 30GHz and Rx 20GHz are implemented in LTCC process. Tx antenna has a circular patch structure and Rx antenna has a ring patch structure. The feeding line of Tx antenna is placed in the center hole of Rx ring patch antenna which is printed under Tx circular patch antenna layer. It makes antenna size smaller. Tx antenna's return loss in under -10dB level from 30GHz to 31GHz and Rx antenna is under -10 dB from 20GHz to 21GHz. The isolation between two antennas is less than -20dB. Axial ratio is less than 3dB though out each band.

• Composites Research
• /
• 제34권2호
• /
• pp.136-142
• /
• 2021

3D 프린팅 기술은 금형이 없이 다양한 형태의 제품을 만들기 쉬운 장점이 있지만, 기존 보편화된 성형법에 비해 기계적 물성이 낮고, 소재 및 제작 조건 등에 따라 기계적 물성이 크게 달라지는 문제가 있다. 한편, 높은 물성을 구현하기 위해서는 제조비용이 높아지는 문제가 있어, 이에 대한 연구 필요성이 증가하고 있다. 본 연구에서는 단섬유 탄소섬유 보강 나일론 필라멘트를 이용하여 3D 프린팅 열가소성 구조물을 제작하였다. 또한 인발 성형된 연속섬유 형태의 탄소섬유 혹은 유리섬유 강화 열경화성 복합재를 이용해 외측면을 보강하여 기계적 물성 향상 방법을 제시하였다. 보강재의 보강 위치와 섬유의 종류에 따른 굽힘물성 향상을 확인하였다.

• 대한전자공학회논문지
• /
• 제17권6호
• /
• pp.78-85
• /
• 1980

본 논문에서는 주로 bifilar pair의 연선에 의한 대칭 3dB quadrature hybrid 회로의 구성에 관하여 고찰 연구 하였다. 연선으로된 두 개의 하이브리드를 종속연결함으로서 VHF 대에서 결합손실(coupling loss)이 작으며 한 옥타브의 대성폭을 갖는 quadrature hybrid 회로를 실현 할 수 있었다. 이러한 유형의 하이브리드는 짜임새가 간결하면서도 저렴하므로 1GHz 이하의 주파수 대역에서 일반적으로 사용되고 있는 동축선 형 또한 인쇄회로형보다 오히려 유리하다고 생각된다 본 연구는 텔레비젼 전파의 고스트 방지를 위하여 두개의 다른 안테나 신호를 혼합하는 하이브리드 회로를 얻기위한 설계방법을 제시한 것이다.

• 한국전자파학회논문지
• /
• 제29권5호
• /
• pp.359-365
• /
• 2018

본 논문에서는 기존 단품 Printed Spiral Coil(PSC)의 외부 노이즈 결합의 저감을 위한 차폐 구조와 차폐된 PSC의 대역폭 개선을 위한 설계법이 제안되었다. 차폐 구조가 적용될 경우, PSC와 차폐 구조 사이의 기생 커패시턴스에 의한 공진현상으로 인해 단품 PSC 대비 전달함수 대역폭에 한계를 가지게 되며, Radio-Frequency Interference(RFI) 노이즈 원으로 가정된 $50{\Omega}$ 마이크로스트립 라인과의 전달함수 시뮬레이션을 통해 이를 확인하였다. 차폐된 PSC의 등가회로 모델을 통해 대역폭을 개선할 수 있는 방안을 제시하고, 3D field simulation을 이용한 사례 연구를 통해 방안의 타당성을 검증하였다. 제시된 방안을 기반으로 차폐 구조가 적용된 PSC 설계의 최적화를 수행하였으며, 측정 검증을 통해 전달함수가 보존되는 범위 내에서 전달함수의 대역폭이 개선됨을 확인하였다.

• Journal of Information Display
• /
• 제4권3호
• /
• pp.6-11
• /
• 2003

We have fabricated a carbon nanotube field emission display (CNT-FED) panel with a 2-inch diagonal size by using a screen printing method and vacuum in-line sealing technology. The sealing temperature of the panel was around 390$^{\circ}C$ and the vacuum level was obtained with 1.4x$10^{-5}$torr at the sealing. When the field emission properties of a fabricated and sealed CNT-FED panel were characterized and compared with those of the unsealed panel which was located in a test chamber of vacuum level similar with the sealed panel. As a result, the sealed panel showed similar I-V characteristics with unsealed one and uniform light emission with very high brightness at a current density of 243 ${\mu}A/cm^2$, obtained at the electric field of 10 V/${\mu}m$.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3025-3029
• /
• 2014

To realize copper-based electrode materials for printed electronics applications, it is necessary to improve the adhesion strength between conductive lines and the substrate. Here, we report the preparation of Cu pastes using (3-glycidoxypropyl) trimethoxysilane (GPTMS) prepolymer as an adhesion promoter (AP). The Cu pastes were screen-printed on glass and polyimide (PI) substrates and sintered at high temperatures (> $250^{\circ}C$) under a formic acid/$N_2$ environment. According to the adhesion strengths and electrical conductivities of the sintered Cu films, the optimized Cu paste was composed of 1.0 wt % GPTMS prepolymer, 83.6 wt % Cu powder and 15.4 wt % vehicle. After sintering at $400^{\circ}C$ on a glass substrate and $275^{\circ}C$ on a PI substrate, the Cu films showed the sheet resistances of $10.0m{\Omega}/sq$. and $5.2m{\Omega}/sq$., respectively. Furthermore, the sintered Cu films exhibit excellent adhesion properties according to the results of the ASTM-D3359 standard test.

• 공학교육연구
• /
• 제24권3호
• /
• pp.42-49
• /
• 2021

This paper deals with the development and application of a 3D printing education program implemented to cultivate creative fusion-type talents required by the 4th Industrial Revolution. Specifically, the entire process developed by applying the ADDIE program development model, from 3D modeling to post-processing of printed materials, was performed individually and for each team for about 200 second-year college students for two weeks. Through this program, students develop the basic ability to apply 3D printing to the learning curriculum, the ability to solve problems through cooperative interactions between team members, and convergence thinking ability by collaborating within the team by students from various major fields. They are proved by analyzing an education satisfaction survey conducted after application of the program. In conclusion, the program of this paper presents a methodology for effective 3D printing education in universities.

• ETRI Journal
• /
• 제23권1호
• /
• pp.33-38
• /
• 2001

A numerical simulation and an experimental implementation of T-shaped microstrip-fed printed slot array antenna are presented in this paper. The proposed antenna with relative permittivity 4.3 and thickness 1.0mm is analyzed by the finite-difference time-domain (FDTD) method. The dependence of design parameters on the bandwidth characteristics is investigated. The measured bandwidth of twin-slot array antenna is from 1.37 GHz to 2.388 GHz, which is approximately 53.9 % for return loss less than or equal to -10 dB. The bandwidth of twin-slot is about 1.06 % larger than that of single-slot antenna. The measured results are in good agreement with the FDTD results.