• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.323-328
• /
• 2004

The development of group-specific tissue probability maps (TPM) provides a priori knowledge for better result of cerebral tissue classification with regard to the inter-ethnic differences of inter-subject variability. We present sequential procedures of group-specific TPM and evaluate the age effects in the structural differences of TPM. We investigated 100 healthy volunteers with high resolution MRI scalming. The subjects were classified into young (60, 25.92+4.58) and old groups (40, 58.83${\pm}$8.10) according to the age. To avoid any bias from random selected single subject and improve registration robustness, average atlas as target for TPM was constructed from skull-stripped whole data using linear and nonlinear registration of AIR. Each subject was segmented into binary images of gray matter, white matter, and cerebrospinal fluid using fuzzy clustering and normalized into the space of average atlas. The probability images were the means of these binary images, and contained values in the range of zero to one. A TPM of a given tissue is a spatial probability distribution representing a certain subject population. In the spatial distribution of tissue probability according to the threshold of probability, the old group exhibited enlarged ventricles and overall GM atrophy as age-specific changes, compared to the young group. Our results are generally consistent with the few published studies on age differences in the brain morphology. The more similar the morphology of the subject is to the average of the population represented by the TPM, the better the entire classification procedure should work. Therefore, we suggest that group-specific TPM should be used as a priori information for the cerebral tissue classification.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.137-144
• /
• 2015

In this paper, we present an inertial sensor-based gait analysis system to measure and analyze lower-limb movements. We developed an integral AHRS(Attitude Heading Reference System) using a combination of rate gyroscope, accelerometer and magnetometer sensor signals. Several AHRS modules mounted on segments of the patient's body provide the quaternions representing the patient segments's orientation in space. And a method is also proposed for calculating three-dimensional inter-segment joint angle which is an important bio-mechanical measure for a variety of applications related to rehabilitation. To evaluate the performance of our AHRS module, the Vicon motion capture system, which offers millimeter resolution of 3D spatial displacements and orientations, is used as a reference. The evaluation resulted in a RMSE(Root Mean Square Error) of 1.08 and 1.72 degree in yaw and pitch angle. In order to evaluate the performance of our the gait analysis system, we compared the joint angle for the hip, knee and ankle with those provided by Vicon system. The result shows that our system will provide an in-depth insight into the effectiveness, appropriate level of care, and feedback of the rehabilitation process by performing real-time limb or gait analysis during the post-stroke recovery.

• The Journal of Dong Guk Oriental Medicine
• /
• v.3
• /
• pp.237-267
• /
• 1994

The purpose of this study is the approach to I.I.C.P. centered on the meaning of consciousness disorder and the pathological aspect of Kwul (Jose consciousness ; faint, fall into a coma). The meaning of consciousness disorder and apoplexy is evidently involved the definition of Kwul. 1. It is found that the etymological interpretation on Kwul which the energy rises back to go through blocked space and the meaning interpretation of regarding Kwul as apoplexy with medical viewpoint, are related with consciousness disorder and motor disturbance in IICP in the aspect of the rise of Kwul and the abnormal rising of vital energy and blood, In addtion, the overall of meaning of Kwul is showed in table <1-1> by reference to doctors of many generations, 2. The pathology of Kwul includes abnormal rising, sthenia-syndrome in the upper part and asthenia in the lower, the origin of Kwul, the lower, looking like Yin by too sthenic Yang and looking like Yang by too sthenic Yin. The headache, vomiting, papilledema, paralysis of nervi craniales, coma, blood pressure rising, tachycardia by I.I.C.P can be regarded as a conception of trouble of vital energy, sthenia-syndrome of Kwul. The pulse pressure, brachycardia, bradypnea can be regarded as the conception of looking like Yin by too sthenic Yang. 3. In the emergency of Kwul, the abnormal ternimal reversion of the Kwulyin channel, Kuyang channel, and three Yins are related with the phenomenon in I.I.C.P. It is considered that the reverse movement of materials, I.I.C.P. can be closely observed by giving meaning on the meridian of Kwul in Somunkwulron. And the content of phrases of Naelyung which includes consciousness disorder refered in the chapter of Kwul, is compared with I.I.C.P. 4. The followings should be considered; examination of optic symptom and abnormal posture in cerebral herniation ; understanding and working out counterplans of factors and symptoms of consciousness disorder by the observation of vital sign, check of general stages, neurologic inverstigation, clinical diagnosis, and subsidiary diagnosis; application of morphological change of opinion; addtion of the conception of demonstration centered on Yunkyung, Samyinkwulruk, asthenia and thenia of healthy energy in oriental medicine. 5. The similarity of Kwul and I.I.C.P. can be found from etiology and pathotenic factor. The similarity is clearly found by investigation of etiology, pathotenic factor, symptoms and thrapy of Kwul, disease symptom ar.d other symptoms.

• 모자간호학회지
• /
• v.4 no.1
• /
• pp.3-11
• /
• 1994

Presently there is an increasing demand for home health care services due to changes in the demographic structure as a result of an increasing elderly population, socio-economic improvements, and changes in the family structure, as well as the growing number of people with degenerative diseases. In addition to these reasons, rising medical costs and there a shortage of patient beds space in the hospital, particularly since introduction of national medical insurance. There has been an increasing demand for health care health care services. This study was done to identify the basic data for home health care management. It focused on developing client selection criteria, assessment tools, and recording methods. This was accomplished by the researchers visiting the patients in their homes. The research process included preparation investigation, tool development, training of the project researcher, and visiting the clients in their homes. The research tools are as follows : 1. Record development : a) The selection criteria tool for home health care of postpartum women was a structured tool and consisted of four parts. b) The structured assessment tool consisted of a general items, obstetric history, past medical history, methods of feeding, medications taken before admission, laboratory test results, discharge instructions, discharge medications, family tree, economic status, environmental status, a map, health assessment of postpartum women and their newborns. c) The visit note I consisted of the frequency of visits. Visit note II consisted of the date ; nursing problems ; nursing process including the initial assessment ; nursing goal ; visit plan ; postpartum women and their neonate health status, diagnosis, goal, implementation, evaluation, summary, next plan, for visit revision. d) Problem note consisted of the date, problem numbers, nursing diagnosis, problem appearance date problem resolution date. The research results are as follows : 1. Nursing problems : The nursing problems of the postpartum women and their neonates were evaluated by the number of nursing diagnoses and the change in the pattern of nursing diagnosis related to the number of visits. a) Nursing diagnosis The nursing diagnosis was classified according to physical function, psychosocial function, family system maintained function. b) The changes of nursing diagnosis related to the number of visits. As the type of nursing diagnosis changed related to the number of visits the number of nursing diagnoses decreased. 2. Contents of home health care : The content was categorized according to assessment, direct care, counseling, education, family care, reporting to with the attending doctor. The recommendations based on the research results are as follows : 1. Tool development Replication of this study is needed to test the validity of the assessment tools used. 2. Home visit a) Home health care nurses should be licensed and qualified. A referral form from the attending doctor is needed for legal protection of nurses. b) The first home visit need to be within 24 hours of discharge from the hospital to decrease the anxiety of frightened postpartum women. c) When the changes occur in the newborn's status, home health care nurses should consult a pediatrician. Communication within the home healthcare team is essential and needs to consistent and done smoothly. 3. Home health care A Study is required to develop protocols for education of staff and for operation of all aspects of this program.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.459-465
• /
• 2012

This study analyzed the effect of semi-rigid rafter-purlin cross-linking connection and driven steel pipe base on the static behavior of plastic greenhouse (PG). To promote the time and cost efficiency of the assembly process, each cross-linking connections of space arch type grid that consists of rafter and purlin is linked with steel-wire buckles, and each end of the rafters was driven directly to the ground to support the PG structure. However, in the design process, cross-linking connections and bases are idealized by being categorized as fully rigid or frictionless pinned, which does not appropriately reflect actual conditions. This study takes a full-scale loading test of PG and analyzes the effect of member cross-linking connections and driven steel pipe base on the behavior of a structure. The analysis provided a basis for determining the rigidity factor of member cross-linking nodes needed for finite element analysis, and the reliability of the result regarding the static behavior of PG.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.919-927
• /
• 2019

In this paper, we propose an accurate camera calibration method for acquiring multiview stereoscopic images. Generally, camera calibration is performed by using checkerboard structured patterns. The checkerboard pattern simplifies feature point extraction process and utilizes previously recognized lattice structure, which results in the accurate estimation of relations between the point on 2-dimensional image and the point on 3-dimensional space. Since estimation accuracy of camera parameters is dependent on feature matching, accurate detection of checkerboard corner is crucial. Therefore, in this paper, we propose the method that performs accurate camera calibration method through accurate detection of checkerboard corners. Proposed method detects checkerboard corner candidates by utilizing 1-dimensional gaussian filters with succeeding corner refinement process to remove outliers from corner candidates and accurately detect checkerboard corners in sub-pixel unit. In order to verify the proposed method, we check reprojection errors and camera location estimation results to confirm camera intrinsic parameters and extrinsic parameters estimation accuracy.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.503-514
• /
• 2021

Rice production with adequate level of area is important for decision making of rice supply and demand policy. It is essential to grasp rice cultivation areas in advance for estimating rice production of the year. This study was carried out to classify paddy rice cultivation in Gimje-si using sentinel-1 SAR (synthetic aperture radar) and UAV imagery in early July. Time-series Sentinel-1A and 1B images acquired from early May to early July were processed to convert into sigma naught (dB) images using SNAP (SeNtinel application platform, Version 8.0) toolbox provided by European Space Agency. Farm map and parcel map, which are spatial data of vector polygon, were used to stratify paddy field population for classifying rice paddy cultivation. To distinguish paddy rice from other crops grown in the paddy fields, we used the decision tree method using threshold levels and random forest model. Random forest model, trained by mainly rice cultivation area and rice and soybean cultivation area in UAV image area, showed the best performance as overall accuracy 89.9%, Kappa coefficient 0.774. Through this, we were able to confirm the possibility of early estimation of rice cultivation area in Gimje-si using UAV image.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.520-533
• /
• 2021

It is necessary to increase the blasting efficiency in order to minimize the economic loss caused when the excavation cross section is reduced due to the stability problem of underground mining development, and for this, a new blasting design is proposed. In this study, the blasting efficiency of the general design in the field, the suggestion designI, which added two columns to production blasting, and the suggestion design II, which added one column to create asymmetry, is compared. Advance rate and fragmentation were selected as the evaluation index of the blasting efficiency. In the case of advance rate, compared to the normal, the suggestionI improved by 6.07% and the suggestionII improved by 4.65%. In the case of fragmentation, based on P80, compared to the normal, the suggestionI reduced about 58% and the suggestionII was about 47%. Accoording to the evaluation index, the suggestion designI shows better blasting efficiency than the suggestion designII. But considering the additional work time and cost required for the suggestion designI due to the insignificant difference in the evaluation index results, the asymmetry V-cut, the suggestion designII, is judged to be a more suitable blasting design for the site.

• Composites Research
• /
• v.35 no.3
• /
• pp.201-215
• /
• 2022

This paper presents the development of thin and lightweight ultra-high temperature radar-absorbing ceramic composites composed of an aluminosilicate ceramic matrix-based geopolymer reinforced ceramic fiber and sendust magnetic nanoparticles in X-band frequency range (8.2~12.4 GHz). The dielectric properties with regard to complex permittivity of ceramic/sendust-aluminosilicate composites were proportional to the size of sendust magnetic nanoparticle with high magnetic characteristic properties as flake shape and its concentrations in the target frequency range. The characteristic microstructures, element composition, phase identification, and thermal stability were examined by SEM, EDS, VSM and TGA, respectively. The fabricated total thicknesses of the proposed single slab ultra-high temperature radar absorber correspond to 1.585 mm, respectively, exhibiting their excellent EM absorption performance. The behavior of ultra-high temperature EM wave absorption properties was verified to the developed free-space measurement system linked with high temperature furnace for X-band from 25℃ to 1,000℃.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.483-490
• /
• 2021

Due to the recent increase in various problems from underground development in urbanized areas, accurate underground facility information management is highly needed. Therefore, in this study, in order to utilize the Integration Map of Underground Goespatial Information in real time on-site, the function of comparing the mutual location of the GPR (Ground Penetration Radar) sensing data and the Integration Map of Underground Goespatial Information, and function of analyze underground facilities, and function of converting surveying data into a shape file through position correction & attribute editing in a 3D space, and the function of submitting the shape file to the Integration Map of Underground Goespatial Information mobile center was defined and developed as a program. In addition, for the on-site application test of the development program, scenarios used at the underground facility real-time survey site and GPR exploration site were derived, and four sites in Seoul were tested to confirm that the use scenario worked properly. Through this, the on-site utilization of the program developed in this study could be confirmed, and it would contribute to the confirmation of the quality of Shape-file and the "update automation" of "Integration Map of Underground Goespatial Information". In addition, it is expected that the development program will be further applied to the Underground Facility Map's Accuracy Improvement Diffusion Project' promoted by the MOLIT (Ministry of Land, Infrastructure, and Transport).